Post your BenQ DW1655 DL scans here - Club CDFreaks

djfunz · 06-01-2006

man oh man im so happy to put my first official scan with my new benq 1655. i noticed nobody was doing any scans using double layer media so i decided to take matters into my own hands. whenever people start to aqquire this drive i hope to see more scans here in this thread with double layer or dual layer media.

*zebadee* · 06-01-2006

Hi

That's a damn fine start there to DL scanning.

**alan1476** · 06-01-2006

Quote:

Originally Posted by zebadee

Hi

That's a damn fine start there to DL scanning.

Did you notice the jitter, Zebadee, whats up with that?

**zevia** · 06-01-2006

There is a single spike jitter around 7.6GB, otherwise is quite good.

PS: Thread title changed.

beetz0r · 06-01-2006

what number is considered too high in jitter?

*pchilson* · 06-01-2006

Verbatim branded MKM 01RD30 @ 4x -R DL
Burn time 32:32
CD Speed 4.10
WOPC on
Overspeed Off
Solidburn On Unknown
Solidburn Off known

shadow07 · 06-01-2006

please see my successful scan for the last samurai.
go along with djfunz

*Sportfish* · 07-01-2006

Hey shadow and djfunz......... Try setting your speed down to 8X on your Qual test instead of max.

captmorgan4101 · 07-01-2006

Fuji Branded 2.4x DVD+R-DL:RITEK-D01-001 Burnt@2.4x
Solid Burn On
Wopc On
CD Speed 4.10
Burn Time = 45 Minutes

*Sportfish* · 07-01-2006

Quote:

Originally Posted by captmorgan4101

Fuji Branded 2.4x DVD+R-DL:RITEK-D01-001 Burnt@2.4x
Solid Burn On
Wopc On
CD Speed 4.10
Burn Time = 45 Minutes

[IMG]

[/IMG]

Hey Capt'n.......... I'll have to drink a bunch of it in order to be able to view your image's. Just save them to my docs. To do this, after your burn is done, click the square to the left of the minimize button. Then you can upload the image to the forum. If you need help with that let me or anyone else know here on the forum and we'll be glad to help you out.

DVD_PREDATOR · 08-01-2006

Media:Verbatim 2.4x Double Layer
Firmware:GCAB
Software:Nero 6
Burn speed:2.4x
Burned with:DW-1655 rebadged(I/O Magic)

*qwakrz* · 09-01-2006

I know I will probably get shot for this but..... Has anyone done a burn on CMC MAG D01. Videohelp reports good results with this media (Not as good as MKM 001 but loads better than ritek). Just curious.

shadow07 · 10-01-2006

here is a post for amercian pie

maxxjulie · 12-01-2006

I can't seem to get great results with dual layer burns and my Benq 1655. I use Verbatim DL dvd+r's. At best I get scores in the low 90's with Nero Cd-Dvd Speed. Solid Burn and WPOC on seem to give me consistent scores of 94-95. I'll attach a quality scan of what I usually get with these settings. I haven't burned more than two discs in each possible setting cuz it takes so long to burn and then scan. So I don't know if this is the best way to do it. Anyone getting better results with a different setting?

maxxjulie · 12-01-2006

I thought I was getting crappy burns with my 1655 Benq but it seems to be close to what everyone else here is getting. Best score I got was 96 with Nero Cd-Dvd Speed but it's usually 94 for some reason. Above is the scan of what I usually get so far with SB and WPOC on.

*Sportfish* · 12-01-2006

Quote:

Originally Posted by maxxjulie

. Here's scan of what I usually get so far with SB and WPOC on:

Hey maxx........Where is it??????

As Sgt. Schultz says, I see nothing.

maxxjulie · 12-01-2006

Great, I didn't see this thread and couldn't upload my quality scan just now cuz I already uploaded it into a new thread I started 40 minutes ago. Well, PI Errors total were 101,595 with a max. of 21. PI Failures total were 1328 with a max of 10. Just one spike with everything else 7 or less. Jitter avg. was 7.99% with max. of 9.7%. Quality score of 94. The dvd was 7770 mb full. I scanned it @6x. Benq 1655 can't do 5x for some reason. Sorry I typed the stats. I know it's lame but I messed up and started a new thread cuz I didn't see this one. You can only upload something once in this site.

*Sportfish* · 12-01-2006

Quote:

Originally Posted by maxxjulie

Great, I didn't see this thread and couldn't upload my quality scan just now cuz I already uploaded it into a new thread I started 40 minutes ago. Well, PI Errors total were 101,595 with a max. of 21. PI Failures total were 1328 with a max of 10. Just one spike with everything else 7 or less. Jitter avg. was 7.99% with max. of 9.7%. Quality score of 94. The dvd was 7770 mb full. I scanned it @6x. Benq 1655 can't do 5x for some reason. Sorry I typed the stats. I know it's lame but I messed up and started a new thread cuz I didn't see this one. You can only upload something once in this site.

Just an FYI for you maxx.......We use 8X to scan with BenQ's in the Qual test.

maxxjulie · 12-01-2006

Oh sorry. I'm wondering though does a dvd player read the disc that fast? I thought it was slower so the scans should be done in a slower speed. I always thought quality scans were done at 5x but I did it in 6x cuz it's not an option with this drive. Well, if that's the rule I'll post 8x scans from now on. I just burned another disc and will post a scan soon. Thanks to the moderator that got my scan added to my post.

maxxjulie · 12-01-2006

I made this one with SB and WPOC on. This is a another dvd I burned of the same movie I posted earlier.

*Sportfish* · 12-01-2006

Quote:

Originally Posted by maxxjulie

Oh sorry. I'm wondering though does a dvd player read the disc that fast? I thought it was slower so the scans should be done in a slower speed. I always thought quality scans were done at 5x but I did it in 6x cuz it's not an option with this drive. Well, if that's the rule I'll post 8x scans from now on. I just burned another disc and will post a scan soon. Thanks to the moderator that got my scan added to my post.

Each drive is a little different. NEC's are at 5X (if possible) but BenQ's are done at 8X.

jakewash · 12-01-2006

Here is my first, and only, DL of Fuji Film branded Ricoh. It plays well in the stand alone. The other 2 discs I tried to burn came up with write errors.

*Sportfish* · 12-01-2006

Quote:

Originally Posted by jakewash

Here is my first, and only, DL of Fuji Film branded Ricoh. It plays well in the stand alone. The other 2 discs I tried to burn came up with write errors.

Hey jake.......Try another Qual scan at 8X. This is the speed we use with BenQ's.

jakewash · 13-01-2006

Silly me I am used to my Lite on. Here it is again at 8X

sillysally · 14-01-2006

BenQ DVD LS DW1655 BCAB

06-01-2006	#2 (permalink)
zebadee CD Freaks Member Join Date: Apr 2005 Posts: 5,061	Re: 1655 double layer scans here Hi That's a damn fine start there to DL scanning.

06-01-2006	#4 (permalink)
zevia Admin & Review Coordinator N.America Join Date: Jul 2004 Location: USA Posts: 9,637	Re: Post your BenQ DW1650/DW1655 DL scans here There is a single spike jitter around 7.6GB, otherwise is quite good. PS: Thread title changed. __________________ Click here to join CDFreaks.com Join CDFreaks Distributed Computing Team, have fun while helping to save some lives! My review PC & Specs & Media Blu-ray to DVD guide Forum Rules \| Blu-ray UDF Driver BenQ/Philips FAQ and tools: BQFlasher, MCSE, WOPC Tool, WinDWFlash LG GGW-H10N Blu-ray/HD-DVD \| LG GBW-H10N Blu-ray \| Panasonic SW-5582 Blu-ray

06-01-2006	#5 (permalink)
beetz0r CD Freaks Rookie Join Date: Dec 2005 Posts: 48	Re: Post your BenQ DW1650/DW1655 DL scans here what number is considered too high in jitter?

07-01-2006	#8 (permalink)
Sportfish CDFreaks Resident Join Date: Nov 2004 Location: Land of 10,000 + Lakes U.S.A. Posts: 2,372	Re: Post your BenQ DW1650/DW1655 DL scans here Hey shadow and djfunz......... Try setting your speed down to 8X on your Qual test instead of max. __________________ Lil Burnit's Cyber Godfather #1 Machine = PowerSpec E360, Intel Quad 2 Core Q6600 Processor, 4g Corsair 667Mhz DDR2 Ram, nVidia 8500GT Vidio Card, Samsung SH-S183L, SH-S203N, BenQ 1620 & 1650 DVD Burners and looking for 1 more to fill her up, 1 TB Hardrive = 2 WD 500g HD's set up in Raid 0, Epson CX9400 printer, Running XP Pro. #2 Machine Hp Pavilion a367c,P4 2.8, Internal 320G WD HDD,2 160G Seagate & 1 120G Seagate Ext. HDD. 1G PC3200 Ram, Win XP Home SP2,(2)- NEC 3500a with LD_V2_Beta_8 & LD_V1_4_Final FW,BenQ 1620 vB7V9 F/W for now, BenQ 1650 vBCHC, Liteon SOHW-1633-S DVD RW BS41 FW, Ext. Stock HP DVD-Rom, Ben-Q 19" LCD FP951, Epson R300 Photo Printer, Epson Stylus C84, Epson CX5800F.

09-01-2006	#12 (permalink)
qwakrz CDFreaks Resident Join Date: Nov 2003 Location: Plymouth, UK Posts: 871	Re: Post your BenQ DW1655 DL scans here I know I will probably get shot for this but..... Has anyone done a burn on CMC MAG D01. Videohelp reports good results with this media (Not as good as MKM 001 but loads better than ritek). Just curious. __________________ Current Setup Corsair 750W Core 2 Quad Q6700 @ 3.33GHz (333x10) Swiftech H20 Ultra+ Watercooling CoolerMaster Tsunami Dream Case 6GB PC6400 DDR2 RAM @ 4-4-4-15 800MHz (2x2 + 2x1) Asus P5K Deluxe 8800GTS @ 800/2000/1000 + Water block 19" BenQ 4:3 TFT 19" Hannson 16:9 TFT BenQ 1655 Lite-on 20A1S LG BD-R/HDDVD Samsung 750GB x 3 Raid 5 Logitech G15 Keyboard iPhone 3G 16GB Archos 560 Please dont PM me directly with your problems..... Thats what these forums are for.

Commercial message
<a href='http://adstats.cdfreaks.com/www/delivery/ck.php?n=a5c5554b&cb=INSERT_RANDOM_NUMBER_HERE' target='_blank'><img src='http://adstats.cdfreaks.com/www/delivery/avw.php?zoneid=29&cb=INSERT_RANDOM_NUMBER_HERE&n=a5c5554b' border='0' alt='' /></a>

10-01-2006	#13 (permalink)
shadow07 CD Freaks Junior Member Join Date: Dec 2005 Posts: 91	Re: Post your BenQ DW1655 DL scans here here is a post for amercian pie

12-01-2006	#15 (permalink)
maxxjulie CD Freaks Member Join Date: Jun 2005 Posts: 188	Re: Post your BenQ DW1655 DL scans here I thought I was getting crappy burns with my 1655 Benq but it seems to be close to what everyone else here is getting. Best score I got was 96 with Nero Cd-Dvd Speed but it's usually 94 for some reason. Above is the scan of what I usually get so far with SB and WPOC on. Last edited by zevia; 12-01-2006 at 02:27.

12-01-2006	#17 (permalink)
maxxjulie CD Freaks Member Join Date: Jun 2005 Posts: 188	Re: Post your BenQ DW1655 DL scans here Great, I didn't see this thread and couldn't upload my quality scan just now cuz I already uploaded it into a new thread I started 40 minutes ago. Well, PI Errors total were 101,595 with a max. of 21. PI Failures total were 1328 with a max of 10. Just one spike with everything else 7 or less. Jitter avg. was 7.99% with max. of 9.7%. Quality score of 94. The dvd was 7770 mb full. I scanned it @6x. Benq 1655 can't do 5x for some reason. Sorry I typed the stats. I know it's lame but I messed up and started a new thread cuz I didn't see this one. You can only upload something once in this site.

12-01-2006	#19 (permalink)
maxxjulie CD Freaks Member Join Date: Jun 2005 Posts: 188	Re: Post your BenQ DW1655 DL scans here Oh sorry. I'm wondering though does a dvd player read the disc that fast? I thought it was slower so the scans should be done in a slower speed. I always thought quality scans were done at 5x but I did it in 6x cuz it's not an option with this drive. Well, if that's the rule I'll post 8x scans from now on. I just burned another disc and will post a scan soon. Thanks to the moderator that got my scan added to my post.