Philips dvdr1648p1 wont burn dvd's via nero (but will burn cd's such as music) - Club CDFreaks

samplayford · 20-02-2007

Philips dvdr1648p1 wont burn dvd's via nero (but will burn cd's such as music) burnt using media player i have upgraded the firmwire to p2.4 but still nothing :S please message back asap thanks

p.s this is disc info taken from nero cd-dvd speed tester
Nero CD-DVD Speed: Disc Info
Basic Information
Disc type: : DVD-R
Book Type : DVD-R
Manufacturer: : Ritek
MID : RITEKF1
Write speeds: : 2.4 X
Blank Capacity : 4.38 GB
: 4489 MB
: 4707319808 bytes
Extended Information
Layers : 1
Usage : General
Copyright protection : n/a
Recorder information
Disc Status : Closed
Raw Data
Pre-recorded Information in Lead-in (0Eh)
0000 - 01 40 C1 FD 9E D8 52 00 02 87 0D 13 87 88 90 00 - .@....R.........
0010 - 03 52 49 54 45 4B 46 00 04 31 00 00 00 00 00 00 - .RITEKF..1......
0020 - 05 88 80 00 00 00 02 00 F0 FF FF FF 80 EF 1D 00 - ................
0030 - EC 08 11 00 5D 8E 41 77 04 00 00 00 E4 08 11 00 - ....].Aw........
0040 - 10 C0 D4 77 00 80 00 00 CA F2 D5 77 7D 3F 41 77 - ...w.......w}?Aw
0050 - BC 09 11 00 40 34 15 00 EC 1B 93 7C 41 1C 93 7C - ....@4.....|A..|
0060 - 30 51 18 00 48 0C 11 00 00 00 15 00 30 36 21 00 - 0Q..H.......06!.

**TimC** · 20-02-2007

Don't know if there's a more recent firmware but this recent Ritek F1 media has caused many problems for people.

If there's no later firmware then you need to get some decent media like Verbatim.

*pinto2* · 20-02-2007

P2.4 is the latest firmware for this drive (supports mentioned media upto 16x), but as TimC said RITEKF1 is real crap on Philips/BenQ drives.
Bought one 10 pack once and all I managed with a DW1640 was 12x coaster burns.

BTW samplayford, your drive should support SolidBurn and OverSpeed futures that can be enabled or disabled in Nero CD DVD Speed (File-> Options-> Transfer rate).

Also, did you choose "DVD burn" in Nero as shown in attachment.

samplayford · 21-02-2007

i did choose dvd burn in the option + i have used nero express to burn as well, i have jsut installed the new nero 7and that will still not burn my dvd's.

but i have downlaoded a free dvd burner program that successfully burns data onto a dvd disc the program is called amazing cd & dvd burner which i downloaded off of downlaod.com. but this program is limited and i can only burn data and i would like to use nero as this had the other features i require.
i have used different media types and still no success.

when i got the write error from nero this is what the log showed.

Code:

5C80************************

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32 

NT-SPTI used
Nero Version: 7.0.0.0 (Nero Express)
Recorder:                   Version: P2.4 - HA 1 TA 0 - 7.0.0.0
 Adapter driver:                           HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ?
CD-ROM:               Version: P2.4 - HA 1 TA 0 - 7.0.0.0
 Adapter driver:                           HA 1

=== Scsi-Device-Map ===
CdRomPeripheral      : PHILIPS DVDR1648P1               atapi Port 0 ID 0  DMA: On 
DiskPeripheral       : Maxtor 2F020L0                   atapi Port 0 ID 1  DMA: On 
DiskPeripheral       : WDC WD2500KS-00MJB0              nvata Port 2 ID 0  DMA: Off

=== CDRom-Device-Map ===
PHILIPS DVDR1648P1         D:   CDRom0
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 1023MB (1047792kB)
Free physical memory: 300MB (307776kB)
Memory in use       : 70 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

20.2.2007
ISO compilation
23:38:48	#1 Text 0 File Isodoc.cpp, Line 6410
	Iso document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate                : FALSE
	Write                   : TRUE
	Finalize CD             : FALSE
	Multisession            : TRUE
	Multisession type:      : Start multisession
	Burning mode            : DAO
	Mode                    : 1
	ISO Level               : 1 (Max. of 11 = 8 + 3 char)
	Character set           : ISO 9660
	Joliet                  : TRUE
	Allow pathdepth more than 8 directories : TRUE
	Allow more than 255 characters in path  : TRUE
	Write ISO9660 ;1 file extensions        : TRUE
	
23:38:48	#2 Text 0 File ThreadedTransfer.cpp, Line 525
	ReadBuffer-Pipe got 262144KB of Memory
	
23:38:48	#3 Text 0 File Reader.cpp, Line 124
	Reader running
	
23:38:48	#4 Text 0 File Writer.cpp, Line 113
	Writer D: PHILIPS DVDR1648P1 running
	
23:38:48	#5 ISO9660GEN -11 File Geniso.cpp, Line 3304
	First writeable address = 0 (0x00000000)
	
23:38:48	#6 Text 0 File Burncd.cpp, Line 3301
	Turn on Disc-At-Once, using DVD media
	
23:38:48	#7 Text 0 File DlgWaitCD.cpp, Line 277
	Last possible write address on media:  2298495 (510:46.45, 4489MB)
	Last address to be written:            1587407 (352:45.32, 3100MB)
	
23:38:48	#8 Text 0 File DlgWaitCD.cpp, Line 289
	Write in overburning mode: NO (enabled: CD)
	
23:38:48	#9 Text 0 File DlgWaitCD.cpp, Line 2568
	Recorder: PHILIPS DVDR1648P1, Media type: DVD-R
	 Disc Manufacturer: RITEKF - 1
	 Disc Application Code: 64, Disc Physical Code: 193
	
23:38:48	#10 Text 0 File DlgWaitCD.cpp, Line 456
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
23:38:48	#11 Text 0 File ThreadedTransferInterface.cpp, Line 846
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 ()
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 1587408 (1587408) = #1587408/352:45.33
	    relocatable, disc pos for caching/writing not required/ required, no patch infos
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1587408 blocks [D: PHILIPS DVDR1648P1]
	--------------------------------------------------------------
	
23:38:48	#12 Text 0 File ThreadedTransferInterface.cpp, Line 1058
	Prepare recorder [D: PHILIPS DVDR1648P1] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc not fixated
	 Tracks 1 to 1:
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    3251011584, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
	       0 |  lead-in |   0 |    0x41 | 0x00
	       0 |        1 |   0 |    0x41 | 0x00
	       0 |        1 |   1 |    0x41 | 0x00
	 1587408 | lead-out |   1 |    0x41 | 0x00
	
23:38:48	#13 Text 0 File SCSIPassThrough.cpp, Line 34
	SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
	
23:38:48	#14 Phase 24 File dlgbrnst.cpp, Line 1724
	Caching of files started
	
23:38:48	#15 Text 0 File Burncd.cpp, Line 4129
	Cache writing successful.
	
23:38:48	#16 Phase 25 File dlgbrnst.cpp, Line 1724
	Caching of files completed
	
23:38:48	#17 Phase 36 File dlgbrnst.cpp, Line 1724
	Burn process started at 16x (22,160 KB/s)
	
23:38:48	#18 Text 0 File ThreadedTransferInterface.cpp, Line 2669
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
23:38:48	#19 Text 0 File DVDR.cpp, Line 2469
	Recording mode: Sequential Recording Mode for Multisession
	
23:38:48	#20 Text 0 File MMC.cpp, Line 21541
	Set BUFE: Buffer underrun protection -> ON 
	
23:38:48	#21 Text 0 File DVDR.cpp, Line 2624
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
23:38:49	#22 Text 0 File Cdrdrv.cpp, Line 8385
	---- DVD Structure: Physical Format Information (00h) ----
	Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD-R   (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
	 Disc Size: 120 mm,      Maximum Rate:  (F h)
	 Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
	 Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Physical Sector Number of Data Area:      0 h
	 End Sector Number in Layer 0:                 0 h (LBN: FFFD0000 h, 4193920 MB)
	 Data in Burst Cutting Area (BCA) does not exist
	  Start sector number of the current Border-Out: 0 h
	  Start sector number of the next Border-In:     0 h
	 Media Specific [16..63]:
	      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	
23:39:01	#23 SPTI -1135 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
	Sense Key:  0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x0C
	Sense Qual: 0x00
	CDB Data:   0x2A 00 00 00 00 00 00 00 20 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 0C 
	Buffer x06380000: Len x10000
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	
23:39:01	#24 CDR -1135 File Writer.cpp, Line 302
	Write error
	D: PHILIPS DVDR1648P1
	
23:39:01	#25 Text 0 File ThreadedTransfer.cpp, Line 228
	all writers idle, stopping conversion
	
23:39:01	#26 Text 0 File ThreadedTransfer.cpp, Line 222
	conversion idle, stopping reader
	
23:39:01	#27 Text 0 File DVDR.cpp, Line 2866
	EndDAO: Last written address was -1
	
23:39:01	#28 Phase 133 File dlgbrnst.cpp, Line 1724
	Writing short lead-out
	
23:39:05	#29 Phase 38 File dlgbrnst.cpp, Line 1724
	Burn process failed at 16x (22,160 KB/s)
	

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

thanks for your help

**TimC** · 21-02-2007

Various things.

. Nero 7.0.0.0 was the first version of V7 and really should never have been released as it was full of bugs.

. Why multi-session for this burn? Multi-sessions usage is the cause of many DVD burn errors.

. Why the 16x burn speed? That's very unlikely to be successful with this poor quality media. However, the burn failure is almost immediate so that's not a contributory factor in this failure I guess.

How come you were able to select 16x when the original Disk Info log only shows 2.4x as the allowed burn speed? 2.4x is often the default for non-recognised media but now you were able to select 16x.

I still think a quality media will have more chance of success than this Ritek c**p.

samplayford · 21-02-2007

i changed my nero to nero 6 and burnd at 8x and no multisession but still no success but i can burn onto this media with another basic burning program this is what the log showed this time. i have tried everything such as upgrading firmware, new ide cables.
and different media.

this is the log:

Code:

Sam

1A22-****-****-****-****-*****

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 16:35:32 
Nero Version: 6.6.0.17
Internal Version: 6, 6, 0, 17f

Recorder:                   Version: P2.4 - HA 0 TA 0 - 6.6.0.17
 Adapter driver:                         HA 0
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ATAPI 
CD-ROM:               Version: P2.4 - HA 0 TA 0 - 6.6.0.17
 Adapter driver:                         HA 0

=== Scsi-Device-Map ===
CdRomPeripheral      : PHILIPS DVDR1648P1               atapi Port 0 ID 0  DMA: On 
DiskPeripheral       : Maxtor 2F020L0                   atapi Port 0 ID 1  DMA: On 
DiskPeripheral       : WDC WD2500KS-00MJB0              nvata Port 2 ID 0  DMA: Off

=== CDRom-Device-Map ===
PHILIPS DVDR1648P1         D:   CDRom0
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 1023MB (1047792kB)
Free physical memory: 393MB (402792kB)
Memory in use       : 61 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

21.2.2007
ISO compilation
00:18:12	#1 Text 0 File Isodoc.cpp, Line 6356
	Iso document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate                : FALSE
	Write                   : TRUE
	Finalize CD             : TRUE
	Multisession            : FALSE
	Burning mode            : DAO
	Mode                    : 1
	ISO Level               : 1 (Max. of 11 = 8 + 3 char)
	Character set           : ISO 9660
	Joliet                  : TRUE
	Allow pathdepth more than 8 directories : TRUE
	Allow more than 255 characters in path  : TRUE
	Write ISO9660 ;1 file extensions        : TRUE
	
00:18:12	#2 Text 0 File Reader.cpp, Line 127
	Reader running
	
00:18:12	#3 Text 0 File Writer.cpp, Line 122
	Writer PHILIPS  DVDR1648P1       running
	
00:18:12	#4 ISO9660GEN -11 File geniso.cpp, Line 3309
	First writeable address = 0 (0x00000000)
	
00:18:12	#5 Text 0 File Burncd.cpp, Line 3233
	Turn on Disc-At-Once, using DVD media
	
00:18:12	#6 Text 0 File DlgWaitCD.cpp, Line 270
	Last possible write address on media:  2298495 (510:46.45, 4489MB)
	Last address to be written:            1587407 (352:45.32, 3100MB)
	
00:18:12	#7 Text 0 File DlgWaitCD.cpp, Line 282
	Write in overburning mode: NO (enabled: CD)
	
00:18:12	#8 Text 0 File DlgWaitCD.cpp, Line 2483
	Recorder: PHILIPS DVDR1648P1, Media type: DVD-R
	 Disc Manufacturer: RITEKF - 1
	 Disc Application Code: 64, Disc Physical Code: 193
	
00:18:12	#9 Text 0 File DlgWaitCD.cpp, Line 448
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
00:18:12	#10 Text 0 File ThreadedTransferInterface.cpp, Line 838
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 ()
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 1587408 (1587408) = #1587408/352:45.33
	    relocatable, disc pos for caching/writing not required/ required, no patch infos
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1587408 blocks [PHILIPS  DVDR1648P1]
	--------------------------------------------------------------
	
00:18:12	#11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
	Prepare recorder [PHILIPS  DVDR1648P1] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    3251011584, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
	       0 |  lead-in |   0 |    0x41 | 0x00
	       0 |        1 |   0 |    0x41 | 0x00
	       0 |        1 |   1 |    0x41 | 0x00
	 1587408 | lead-out |   1 |    0x41 | 0x00
	
00:18:13	#12 Phase 24 File dlgbrnst.cpp, Line 1832
	Caching of files started
	
00:18:13	#13 Text 0 File Burncd.cpp, Line 4120
	Cache writing successful.
	
00:18:13	#14 Phase 25 File dlgbrnst.cpp, Line 1832
	Caching of files completed
	
00:18:13	#15 Phase 36 File dlgbrnst.cpp, Line 1832
	Burn process started at 8x (11,080 KB/s)
	
00:18:13	#16 Phase 183 File dlgbrnst.cpp, Line 1832
	SolidBurn activated
	
00:18:13	#17 Text 0 File ThreadedTransferInterface.cpp, Line 2661
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
00:18:13	#18 Text 0 File DVDR.cpp, Line 2491
	Recording mode: Sequential Recording Mode
	
00:18:13	#19 Text 0 File Mmc.cpp, Line 21712
	Set BUFE: Buffer underrun protection -> ON 
	
00:18:13	#20 Text 0 File DVDR.cpp, Line 2646
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
00:18:13	#21 Text 0 File Cdrdrv.cpp, Line 8892
	---- DVD Structure: Physical Format Information (00h) ----
	Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD-R   (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
	 Disc Size: 120 mm,      Maximum Rate:  (F h)
	 Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
	 Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Physical Sector Number of Data Area:      0 h
	 End Sector Number in Layer 0:                 0 h (LBN: FFFD0000 h, 4193920 MB)
	 Data in Burst Cutting Area (BCA) does not exist
	  Start sector number of the current Border-Out: 0 h
	  Start sector number of the next Border-In:     0 h
	 Media Specific [16..63]:
	      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	
00:18:51	#22 SCSI -1135 File Cdrdrv.cpp, Line 1436
	SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x04240000
	Status:     0x04 (0x01, SCSI_ERR)
	HA-Status   0x00 (0x00, OK)
	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
	Sense Key:  0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x0C
	Sense Qual: 0x00
	CDB Data:   0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 
	Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12 
	            0x00 0x00 0x00 0x00 0x0C 0x00 
	
00:18:51	#23 CDR -1135 File Writer.cpp, Line 311
	Write error
	
00:18:51	#24 Text 0 File ThreadedTransfer.cpp, Line 228
	all writers idle, stopping conversion
	
00:18:51	#25 Text 0 File ThreadedTransfer.cpp, Line 222
	conversion idle, stopping reader
	
00:18:51	#26 Text 0 File DVDR.cpp, Line 2889
	EndDAO: Last written address was -1
	
00:18:51	#27 Phase 38 File dlgbrnst.cpp, Line 1832
	Burn process failed at 8x (11,080 KB/s)
	

Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 21:59:44 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

thanks for ur help again

20-02-2007	#1 (permalink)
samplayford New on Forum Join Date: Feb 2007 Posts: 3	Philips dvdr1648p1 wont burn dvd's via nero (but will burn cd's such as music) <a href='http://adstats.cdfreaks.com/www/delivery/ck.php?n=a13febf7&cb=INSERT_RANDOM_NUMBER_HERE' target='_blank'><img src='http://adstats.cdfreaks.com/www/delivery/avw.php?zoneid=30&cb=INSERT_RANDOM_NUMBER_HERE&n=a13febf7' border='0' alt='' /></a> Philips dvdr1648p1 wont burn dvd's via nero (but will burn cd's such as music) burnt using media player i have upgraded the firmwire to p2.4 but still nothing :S please message back asap thanks p.s this is disc info taken from nero cd-dvd speed tester Nero CD-DVD Speed: Disc Info Basic Information Disc type: : DVD-R Book Type : DVD-R Manufacturer: : Ritek MID : RITEKF1 Write speeds: : 2.4 X Blank Capacity : 4.38 GB : 4489 MB : 4707319808 bytes Extended Information Layers : 1 Usage : General Copyright protection : n/a Recorder information Disc Status : Closed Raw Data Pre-recorded Information in Lead-in (0Eh) 0000 - 01 40 C1 FD 9E D8 52 00 02 87 0D 13 87 88 90 00 - .@....R......... 0010 - 03 52 49 54 45 4B 46 00 04 31 00 00 00 00 00 00 - .RITEKF..1...... 0020 - 05 88 80 00 00 00 02 00 F0 FF FF FF 80 EF 1D 00 - ................ 0030 - EC 08 11 00 5D 8E 41 77 04 00 00 00 E4 08 11 00 - ....].Aw........ 0040 - 10 C0 D4 77 00 80 00 00 CA F2 D5 77 7D 3F 41 77 - ...w.......w}?Aw 0050 - BC 09 11 00 40 34 15 00 EC 1B 93 7C 41 1C 93 7C - ....@4.....\|A..\| 0060 - 30 51 18 00 48 0C 11 00 00 00 15 00 30 36 21 00 - 0Q..H.......06!.

20-02-2007	#2 (permalink)
TimC Moderator Join Date: Mar 2004 Location: UK Posts: 7,498	Re: Philips dvdr1648p1 wont burn dvd's via nero (but will burn cd's such as music) Don't know if there's a more recent firmware but this recent Ritek F1 media has caused many problems for people. If there's no later firmware then you need to get some decent media like Verbatim.

21-02-2007	#5 (permalink)
TimC Moderator Join Date: Mar 2004 Location: UK Posts: 7,498	Re: Philips dvdr1648p1 wont burn dvd's via nero (but will burn cd's such as music) Various things. . Nero 7.0.0.0 was the first version of V7 and really should never have been released as it was full of bugs. . Why multi-session for this burn? Multi-sessions usage is the cause of many DVD burn errors. . Why the 16x burn speed? That's very unlikely to be successful with this poor quality media. However, the burn failure is almost immediate so that's not a contributory factor in this failure I guess. How come you were able to select 16x when the original Disk Info log only shows 2.4x as the allowed burn speed? 2.4x is often the default for non-recognised media but now you were able to select 16x. I still think a quality media will have more chance of success than this Ritek c**p.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ND_3250A wont burn music cd's	uch	NEC / Optiarc Burner	6	23-07-2007 11:45
Nero 7 still won't burn CD's or DVD's on my Toshiba Satellite	pauljserna	General Software	2	06-07-2007 04:52
Nero 7 won't burn CD's or DVD's on my Toshiba Satellite	pauljserna	General Software	8	29-06-2007 20:18
pioneer DVR-109 will read/burn dvd's but wont read Cd's	steve_tdk	Asus / Pioneer Burner	3	27-05-2006 22:11
Nero 6 wont let me burn DVD's only	davo7890	Nero & InCD	0	11-04-2006 04:03

Commercial message