funny thing with LG GCE-8320b - Club CDFreaks

JAK · 17-08-2002

hi all,

i got a lg 8320b, with 1.04 firmware, and i just seen a funny thing with this.
i've tried to copy a cd, i tried on a cdrw with clone cd, and it let me write à 4x in dao-96 mode.
when i put a cd-r, i can't chose a speed less than 8x, and i can't get the dao-96 mode.
i tried to swap the cd-rw and the cd-r at the last time, but the cd-writer "see" it and change the parameters.
i can't make this copy without 4x speed and the dao-96 mode.

if someone has seen the same, or has a solution (like modofied firmware), please answer back.

i need all the help i can have, so please help me.

(please forgive my bad english, i'm french)

freemason · 24-08-2002

I have found that CloneCD not always identifies
my LG drive properly. If you run "can IDE bus" again,
it normally identifies the drive and its abilities properly.

I have had this problem with CloneCD 4 and a LG8320.

Freemason

JAK · 24-08-2002

i found the probleme doesn't concern just clone cd, nero don't writes my cd-r in dao-96 mode (but it write cd-rw in dao 96)

17-08-2002	#1 (permalink)
JAK New on Forum Join Date: Aug 2002 Posts: 2	funny thing with LG GCE-8320b <a href='http://adstats.cdfreaks.com/www/delivery/ck.php?n=a13febf7&cb=INSERT_RANDOM_NUMBER_HERE' target='_blank'><img src='http://adstats.cdfreaks.com/www/delivery/avw.php?zoneid=30&cb=INSERT_RANDOM_NUMBER_HERE&n=a13febf7' border='0' alt='' /></a> hi all, i got a lg 8320b, with 1.04 firmware, and i just seen a funny thing with this. i've tried to copy a cd, i tried on a cdrw with clone cd, and it let me write à 4x in dao-96 mode. when i put a cd-r, i can't chose a speed less than 8x, and i can't get the dao-96 mode. i tried to swap the cd-rw and the cd-r at the last time, but the cd-writer "see" it and change the parameters. i can't make this copy without 4x speed and the dao-96 mode. if someone has seen the same, or has a solution (like modofied firmware), please answer back. i need all the help i can have, so please help me. (please forgive my bad english, i'm french)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
LG GCE-8320B OC @ LG GCE-8400B	GolemPL	LG Burner	253	08-01-2006 01:24
Lg Gce 8320b	pallys	General Hardware Forum	3	24-07-2002 13:41
LG GCE-8240B to LG GCE-8320B	Gosu	General Hardware Forum	0	19-07-2002 19:03
Lg (hlds) Gce-8320b = Hl-dt-st Gce 8320b	gemarti21	General Hardware Forum	1	15-06-2002 11:02
Gce 8320b Lg	rcowens1966	General Hardware Forum	2	15-05-2002 08:20

Commercial message
<a href='http://adstats.cdfreaks.com/www/delivery/ck.php?n=a5c5554b&cb=INSERT_RANDOM_NUMBER_HERE' target='_blank'><img src='http://adstats.cdfreaks.com/www/delivery/avw.php?zoneid=29&cb=INSERT_RANDOM_NUMBER_HERE&n=a5c5554b' border='0' alt='' /></a>

24-08-2002	#2 (permalink)
freemason Registered User Join Date: Aug 2002 Location: Bjarred, Sweden Posts: 5	I have found that CloneCD not always identifies my LG drive properly. If you run "can IDE bus" again, it normally identifies the drive and its abilities properly. I have had this problem with CloneCD 4 and a LG8320. Freemason

24-08-2002	#3 (permalink)
JAK New on Forum Join Date: Aug 2002 Posts: 2	i found the probleme doesn't concern just clone cd, nero don't writes my cd-r in dao-96 mode (but it write cd-rw in dao 96)