I am unable to find any codes to program my one for all remote control for this device. I thought it was made by Philips but I saw somewhere someone said it was made by Funji??????

In any event, the original remote control for this device works when it wants to which disrupts my recording. I record on the VHS and then when the season of shows that I record are over, I can dub it right onto the DVDR.

Can anyone help please? I have the Cinema 7 One for All, URC-7800B00

Thanks

Rottie95 ;Sorry there is no code for your remote for this unit.I have 2 of these remotes & had to get newer ones.They are One For All also here is the type that works:
http://www.google.com/products/catal...32542300033959
These program in two codes for the SV2000 which is a Funai.
The codes for the one above are DVD 0675 & VCR 0000.
Read the manual & you can program your VCR button to switch between the DVD & VCR by holding it down till it blinks again.

Thank you soooooooooooooooo much. I have been driving myself crazy. I just ordered one.

I don't know if this smilie will work here but I will try

Frome one <) to another

I see that didn't work but try the <) :-) into a yahoo IM if you have it but take out the space before the smilie face code.

Thank you!

I didn't know who made my SV2000 DVD/CD player so wasn't able to figure out which AUX code to use with my Dish Network controller. I found this thread on a Google this afternoon for it.

Entering 1658# did the trick for me. Anyone else having trouble programming their Dish Network controller to work with the basic crappy SV2000 DVD/CD player may wish to try this, too.

1. Hold down AUX button until SAT, TV, VCR, AUX buttons flash.
2. Press 1 6 5 8 #
3. AUX button will flash three times or so.
4. Power button should now work with controlling DVD player on AUX.

Assuming that the code works correctly for your DishNetwork controller, use the radial buttons around "Select" for Rewind, FastForward, Pause, Stop and Play. I've tested it on this one and it seems to work with no problems.

Thanks again for the help in figuring out where this silly player came from, cholla!

@BtaraKtahn ; You are welcome.
My SV2000 works great .The one I have is the DVD player/recorder with a VHS player/recorder sometimes called a combo unit.
I have Dish Network but I also control it with the One For All remote I posted above.
I did have to figure out how not to have the DTVPal & Dish satellite receiver change at the same time.
The remote that comes with the DTVPal will change the Dish satellite box no matter what remote address you set the Dish satellite box to.
If you set the Dish Satellite box to remote address 2 then the One For All universal remote can control both seperately.
You have to reassign the PVR button to a Sat button.
Use the Sat button for the satellite box with code 1170.
Use the PVR button for the DTVPal with code 1775.