Severe rip/Burn slow down after install - Club CDFreaks

tx2step · 28-01-2005

My total burn time from start to finish is usually within the 30-45 min range when backing up my dvd copies...
But after installing Anydvd 4.5.6.2 my total time from start to finish increases to almost 3 hours!
I have the IDE Channel in UDMA 2 and have uninstalled and reinstalled it....same thing. I have the same problem while using DVDXCopy also..increased time for burning. I have successfully copied R2 and the Forgotten while using DVDShrink and anydvd but at the expense of Realllll long rip and burn times...
Any ideas on what the slowdown could be?

WinxpSp1 (tried sp2 too but same result)
Athlon xp2500
Plextor PX708a (with latest firmware)
1 GB Corsair XMS
200GB Maxtor
120 GB Maxtor

Thanks in advance

I faithfully use DriveImage 2002 to quickly restore my puter when those little uh ohs happen.

tx2step · 29-01-2005

[i] I figured it out.
By enabling Fast and Noisy. There was a user that posted it a while back.Thanks.

28-01-2005	#1 (permalink)
tx2step New on Forum Join Date: Jan 2005 Posts: 20	Severe rip/Burn slow down after install My total burn time from start to finish is usually within the 30-45 min range when backing up my dvd copies... But after installing Anydvd 4.5.6.2 my total time from start to finish increases to almost 3 hours! I have the IDE Channel in UDMA 2 and have uninstalled and reinstalled it....same thing. I have the same problem while using DVDXCopy also..increased time for burning. I have successfully copied R2 and the Forgotten while using DVDShrink and anydvd but at the expense of Realllll long rip and burn times... Any ideas on what the slowdown could be? WinxpSp1 (tried sp2 too but same result) Athlon xp2500 Plextor PX708a (with latest firmware) 1 GB Corsair XMS 200GB Maxtor 120 GB Maxtor Thanks in advance I faithfully use DriveImage 2002 to quickly restore my puter when those little uh ohs happen.

29-01-2005	#2 (permalink)
tx2step New on Forum Join Date: Jan 2005 Posts: 20	Re: Severe rip/Burn slow down after install [i] I figured it out. By enabling Fast and Noisy. There was a user that posted it a while back.Thanks.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
slow rip/burn after reformat with Memorex DVD+/-DLRWL1 F16! Help!	whodi	CD and DVD Burners	1	28-07-2006 01:03
Rip, burn and encode times slow?	Recall	Nero Recode	7	16-08-2005 04:57
NEC 3500AG Fast rip, but slow burn speed	KENNYB	NEC / Optiarc Burner	7	07-01-2005 01:29
Help please - Liteon 832s slow rip & burn time	Dewie	LiteOn / PLDS/ Sony Burner	1	02-01-2005 00:12
Slow rip/burn	BigRedDog	Newbie Forum	3	15-10-2003 19:05

Today
CD Freaks	__________________ This advertising will not be shown to registered members. Register your free account today and become a member on Club CD Freaks - Knowledge is Power

Commercial ads