PC Still Locking Up After Install Of 5.2.7.1 - Club CDFreaks

*bigmike7* · 04-07-2005

Yo-

For the past five or six releases - my Burnin' PC locks up if I have AnyDVD turned on - and doesn't lockup if AnyDVD is turned off-

What am I doing wrong (have had the program for about a year - and this problem cropped up a couple of months ago - and has not gotten better)-

TIA for any constructive advise-

Mike

*itzbinnice* · 04-07-2005

Mike

Sounds like AnyDVD is having a conflict with another program.
What other burning programs are you using on that PC?
If you have packet writing software such as Roxio DirectCD or Nero InCD those can cause conflicts.

Also make sure you are using Windows Ide Bus drivers and not NVidia IDE Busmaster drivers, these drivers are also known to cause conflicts.

*bigmike7* · 05-07-2005

Yo-

Thanks for the thoughts-

No Nero InCD installed - but Nero 6.6 suite without InCD is up to date-

NoNVidia drivers - all M$

Don't surf while burning and have not changed anything-

Like I said - worked fine for eight months - then started acting up within the last five or six updates - and when I turn off AnyDVD - I can test, burn, etc-

I think that I have something checked within the AnyDVD program that is causing this - but don't have a clue as to what it is-

Sure would like to hear from Slysoft on this-

Mike

Slinger07 · 05-07-2005

I would try un-installing AnyDVD and re-installing it...that way you can rule that out. Hit Cntrl/alt/delete and make sure Roxio drag-to-disc is not running in the background..Drag-2-disc and In-CD by Nero both cause problems with AnyDVD if run together.

*itzbinnice* · 05-07-2005

Quote:

Originally Posted by bigmike7

Yo-

Thanks for the thoughts-

No Nero InCD installed - but Nero 6.6 suite without InCD is up to date-

NoNVidia drivers - all M$

Don't surf while burning and have not changed anything-

Like I said - worked fine for eight months - then started acting up within the last five or six updates - and when I turn off AnyDVD - I can test, burn, etc-

I think that I have something checked within the AnyDVD program that is causing this - but don't have a clue as to what it is-

Sure would like to hear from Slysoft on this-

Mike

Mike,
Two more suggestions
Make sure under the tab "drives" in AntDVD you have the "enable speed control box" unchecked.

Next disable all your startup programs in msconfig and see if that worked.
If it did. enable the programs one at a time to see if you can isolate which one is causing the problem.

It's a bit over cautious, but whenever I do a burn I always disable everything in startup so no resources are lost as well as any potential conflicts.
Only takes a minute so the inconvenience doesn't bother me.
When done burning I just enable the selected progarms again and reboot again.

04-07-2005	#1 (permalink)
bigmike7 CDFreaks Resident Old Fart Join Date: Jul 2004 Location: Lurking In The Back Of Your Mind Posts: 6,293	PC Still Locking Up After Install Of 5.2.7.1 Yo- For the past five or six releases - my Burnin' PC locks up if I have AnyDVD turned on - and doesn't lockup if AnyDVD is turned off- What am I doing wrong (have had the program for about a year - and this problem cropped up a couple of months ago - and has not gotten better)- TIA for any constructive advise- Mike __________________ Mike Brayden & Lil Burnits Proud Cyber Grampie - 'CERCA, TROVA' - 'NOVUS ORDO SECLORUM' Work Computer= QuadCore Q6600 /4gb OCZ PC2 6400 DDR2 SDRAM /XP Pro-sp3 /(2) Seagate 500 gb HDD's /OCZ 600 watt psu /Optiarc 7200A w/v1.06 fw as Primary/Burner /LiteOn 20A4H w/vQP57 fw as Primary/Reader/Ripper/Disc Quality Testing /Palit ATi Radeon HD 4850 w/512mb GDDR3 Ram Videocard /Acer 22" LCD /Nero 6.6 /DVDFab Gold Burning Computer = AMD Opteron 180 /2gb G. Skill PC3200 DDR SDRAM /XP Home-sp3 /(2) 250gb Seagate SATA Hard Drives /Thermaltake TR2 600 watt psu /Samsung 202G /LiteOn 20A4P /Pioneer 115D /BenQ 1640 x/flashed to EW 164B /Sapphire ATi Radeon HD 4670 w/512mb GDDR3/256 bit Videocard /LCD ViewSonic 20.1" LCD /Nero 6.6 /DVDFab Gold On The Shelf: (2) LiteOn SHM-160P6S as backup, BenQ 1640, LG 4167, Liteon 1693, AOpen 1648/aap-pro

04-07-2005	#2 (permalink)
itzbinnice CDFreaks Resident Join Date: Feb 2002 Location: New York Posts: 1,145	Re: PC Still Locking Up After Install Of 5.2.7.1 Mike Sounds like AnyDVD is having a conflict with another program. What other burning programs are you using on that PC? If you have packet writing software such as Roxio DirectCD or Nero InCD those can cause conflicts. Also make sure you are using Windows Ide Bus drivers and not NVidia IDE Busmaster drivers, these drivers are also known to cause conflicts.

05-07-2005	#3 (permalink)
bigmike7 CDFreaks Resident Old Fart Join Date: Jul 2004 Location: Lurking In The Back Of Your Mind Posts: 6,293	Re: PC Still Locking Up After Install Of 5.2.7.1 Yo- Thanks for the thoughts- No Nero InCD installed - but Nero 6.6 suite without InCD is up to date- NoNVidia drivers - all M$ Don't surf while burning and have not changed anything- Like I said - worked fine for eight months - then started acting up within the last five or six updates - and when I turn off AnyDVD - I can test, burn, etc- I think that I have something checked within the AnyDVD program that is causing this - but don't have a clue as to what it is- Sure would like to hear from Slysoft on this- Mike __________________ Mike Brayden & Lil Burnits Proud Cyber Grampie - 'CERCA, TROVA' - 'NOVUS ORDO SECLORUM' Work Computer= QuadCore Q6600 /4gb OCZ PC2 6400 DDR2 SDRAM /XP Pro-sp3 /(2) Seagate 500 gb HDD's /OCZ 600 watt psu /Optiarc 7200A w/v1.06 fw as Primary/Burner /LiteOn 20A4H w/vQP57 fw as Primary/Reader/Ripper/Disc Quality Testing /Palit ATi Radeon HD 4850 w/512mb GDDR3 Ram Videocard /Acer 22" LCD /Nero 6.6 /DVDFab Gold Burning Computer = AMD Opteron 180 /2gb G. Skill PC3200 DDR SDRAM /XP Home-sp3 /(2) 250gb Seagate SATA Hard Drives /Thermaltake TR2 600 watt psu /Samsung 202G /LiteOn 20A4P /Pioneer 115D /BenQ 1640 x/flashed to EW 164B /Sapphire ATi Radeon HD 4670 w/512mb GDDR3/256 bit Videocard /LCD ViewSonic 20.1" LCD /Nero 6.6 /DVDFab Gold On The Shelf: (2) LiteOn SHM-160P6S as backup, BenQ 1640, LG 4167, Liteon 1693, AOpen 1648/aap-pro

05-07-2005	#4 (permalink)
Slinger07 CD Freaks Member Join Date: Dec 2004 Location: Under a Rock Posts: 170	Re: PC Still Locking Up After Install Of 5.2.7.1 I would try un-installing AnyDVD and re-installing it...that way you can rule that out. Hit Cntrl/alt/delete and make sure Roxio drag-to-disc is not running in the background..Drag-2-disc and In-CD by Nero both cause problems with AnyDVD if run together.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
pc will not install windows	artman	General Hardware Forum	2	17-10-2007 22:23
NEC ND-3550GEN - PC hangs after install	PabloMc2	NEC / Optiarc Burner	1	19-05-2006 23:57
PC restart when try to install alcohol	limacola	Alcohol	4	17-05-2006 23:48
ok to install 2 DVD burners in one PC?	omr	CD and DVD Burners	7	22-02-2006 22:23
can i install 3 drives on my pc	montoyauk	Newbie Forum	7	14-03-2004 19:45

Today
CD Freaks	__________________ This advertising will not be shown to registered members. Register your free account today and become a member on Club CD Freaks - Knowledge is Power

Commercial ads