Error posting from dvd shrink burn - Club CDFreaks

saleen66 · 05-01-2007

I have been using dvd shrink without problems for a long time, but all of a sudden with Mission Impossible 3, I am getting this error. I am using Nero version 6.6.0.8

Please tell me what the error stuff below means. What should I do to burn MI3?

Thanks,
Saleen66

Code:

Error MESSage below:

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 11:06:00 AM 
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 12:35:32 PM 
Nero API version: 6.6.0.8
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder:             <SONY DVD RW DW-Q28A>     Version: KFS1 - HA 0 TA 0 - 6.6.0.8
 Adapter driver:      <atapi>                   HA 0
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ATAPI 

=== Scsi-Device-Map ===
CdRomPeripheral      : SONY DVD RW DW-Q28A              atapi Port 0 ID 0  DMA: On 
CdRomPeripheral      : SONY DVD-ROM DDU1615             atapi Port 0 ID 1  DMA: On 
DiskPeripheral       : WDC WD2500JD-98HBC0             iaStor Port 1 ID 0  DMA: On 

=== CDRom-Device-Map ===
SONY DVD RW DW-Q28A        D:   CDRom0
SONY DVD-ROM DDU1615       E:   CDRom1
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 1022MB (1046928kB)
Free physical memory: 400MB (409680kB)
Memory in use       : 60 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

3.1.2007
NeroAPI
9:34:08 PM	#1 Phase 112 File APIProgress.cpp, Line 276
	DVD-Video files reallocation started
	
9:34:08 PM	#2 Phase 114 File APIProgress.cpp, Line 276
	DVD-Video files reallocation completed (no file modified)
	
9:34:08 PM	#3 Phase 111 File APIProgress.cpp, Line 276
	DVD-Video files sorted
	
9:34:08 PM	#4 Text 0 File Reader.cpp, Line 127
	Reader running
	
9:34:08 PM	#5 Text 0 File Writer.cpp, Line 122
	Writer SONY     DVD RW DW-Q28A   running
	
9:34:08 PM	#6 Text 0 File AudioCompilationImpl.cpp, Line 842
	DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
	DRM: Beginning burn process.
	
9:34:08 PM	#7 ISO9660GEN -11 File geniso.cpp, Line 3293
	First writeable address = 0 (0x00000000)
	
9:34:08 PM	#8 ISO9660GEN -11 File geniso.cpp, Line 3293
	First writeable address = 0 (0x00000000)
	
9:34:08 PM	#9 Text 0 File Burncd.cpp, Line 3153
	Turn on Disc-At-Once, using DVD media
	
9:34:34 PM	#10 Text 0 File DlgWaitCD.cpp, Line 260
	Last possible write address on media:  2298495 (510:46.45, 4489MB)
	Last address to be written:            2286127 (508:01.52, 4465MB)
	
9:34:34 PM	#11 Text 0 File DlgWaitCD.cpp, Line 272
	Write in overburning mode: NO
	
9:34:34 PM	#12 Text 0 File DlgWaitCD.cpp, Line 2339
	Recorder: SONY DVD RW DW-Q28A, Media type: DVD-R
	 Disc Manufacturer: RITEKF - 1
	 Disc Application Code: 64, Disc Physical Code: 193
	
9:34:34 PM	#13 Text 0 File DlgWaitCD.cpp, Line 438
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	Insert empty disc to write to.
		(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-R DL, DVD+R DL.)
	
9:34:34 PM	#14 Text 0 File ThreadedTransferInterface.cpp, Line 830
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 ()
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
	    relocatable, disc pos for caching/writing not required/ required, no patch infos
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [SONY     DVD RW DW-Q28A]
	--------------------------------------------------------------
	
9:34:34 PM	#15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
	Prepare recorder [SONY     DVD RW DW-Q28A] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    4681990144, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
	       0 |  lead-in |   0 |    0x41 | 0x00
	       0 |        1 |   0 |    0x41 | 0x00
	       0 |        1 |   1 |    0x41 | 0x00
	 2286128 | lead-out |   1 |    0x41 | 0x00
	
9:34:34 PM	#16 Phase 24 File APIProgress.cpp, Line 276
	Caching of files started
	
9:34:34 PM	#17 Text 0 File Burncd.cpp, Line 4040
	Cache writing successful.
	
9:34:34 PM	#18 Phase 25 File APIProgress.cpp, Line 276
	Caching of files completed
	
9:34:34 PM	#19 Phase 36 File APIProgress.cpp, Line 276
	Burn process started at 16x (22,160 KB/s)
	
9:34:34 PM	#20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
9:34:34 PM	#21 Text 0 File DVDR.cpp, Line 2216
	Recording mode: Sequential Recording Mode
	
9:34:34 PM	#22 Text 0 File Mmc.cpp, Line 21241
	Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON
	
9:34:34 PM	#23 Text 0 File DVDR.cpp, Line 2362
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
9:34:34 PM	#24 Text 0 File Cdrdrv.cpp, Line 8430
	---- DVD Structure: Physical Format Information (00h) ----
	Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD-R   (2), Part Version: 5
	 Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
	 Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
	 Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Physical Sector Number of Data Area:      26127F h
	 End Sector Number in Layer 0:                 0 h (LBN: FFFD0000 h, 4193920 MB)
	 Data in Burst Cutting Area (BCA) does not exist
	  Start sector number of the current Border-Out: 0 h
	  Start sector number of the next Border-In:     0 h
	 Media Specific [16..63]:
	      00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00    .`...0@P...!....
	      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	
9:35:22 PM	#25 Text 0 File Cdrdrv.cpp, Line 1287
	21:35:22.031 - SONY DVD RW DW-Q28A\H0 T0 : Queue again later
	
9:37:52 PM	#26 SCSI -1046 File Cdrdrv.cpp, Line 1435
	SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x0C960000
	Status:     0x04 (0x01, SCSI_ERR)
	HA-Status   0x00 (0x00, OK)
	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x30
	Sense Qual: 0x05
	CDB Data:   0x2A 0x00 0x00 0x00 0x2E 0xC0 0x00 0x00 0x20 0x00 0x00 0x00 
	Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 
	            0x00 0x00 0x00 0x00 0x30 0x05 
	
9:37:52 PM	#27 CDR -1046 File Writer.cpp, Line 311
	Illegal disc
	
9:37:52 PM	#28 Text 0 File ThreadedTransfer.cpp, Line 228
	all writers idle, stopping conversion
	
9:37:52 PM	#29 Text 0 File ThreadedTransfer.cpp, Line 222
	conversion idle, stopping reader
	
9:37:52 PM	#30 Text 0 File DVDR.cpp, Line 2625
	EndDAO: Last written address was 11967
	
9:37:52 PM	#31 Phase 38 File APIProgress.cpp, Line 276
	Burn process failed at 16x (22,160 KB/s)
	
9:37:52 PM	#32 Text 0 File AudioCompilationImpl.cpp, Line 867
	DRM: DRM burn session terminated.
	
9:37:52 PM	#33 Text 0 File AudioCompilationImpl.cpp, Line 896
	DRM: Closing entire DRM handling. Bye.
	

Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 12/19/2006 4:20:22 AM 
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 11:06:00 AM 
File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 12/19/2006 4:20:16 AM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

*samlar* · 05-01-2007

You are using a program that has not been updated in over a year and is not up to date with the copy protection for newer movies try going to slysoft and download anydvd trial and that should work for you.

I think the first line in your post is the key for your nero you need to edit and remove it.

saleen66 · 05-01-2007

Where the heck is the edit button for posts on here?

saleen66 · 05-01-2007

I guess it wont let me edit a post after it has a reply?

saleen66 · 05-01-2007

Can the admin edit my post for me?

saleen66 · 05-01-2007

Is there any freeware like shrink that works with new stuff or are they all pay to use?

*samlar* · 05-01-2007

Quote:

Originally Posted by saleen66

Is there any freeware like shrink that works with new stuff or are they all pay to use?

Ripit4me is free and will work with dvd shrink I for one think anydvd is worth the cost but if you want to try ripit4me here is the link

http://www.ripit4me.org/

The edit only works for a short time after that a admin person will have to edit your key out.

*jbv* · 05-01-2007

Quote:

9:34:34 PM #12 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: SONY DVD RW DW-Q28A, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193

Quote:

9:34:34 PM #13 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-R DL, DVD+R DL.)

Your SONY DVD RW DW-Q28A firmware Version: KFS1 don't support this mediacode.

This Sony should be a LiteOn 1693S.

saleen66 · 06-01-2007

Samlar,

Is anydvd a similar GUI to that of shrink? Is it as easy to use? Just want to make sure it is the right software to buy if I want an updated softwar package. Do they continue to plan on upgrading this software for those who purchase it?

Thanks.
Saleen66

Liquidmagic · 06-01-2007

AnyDVD has lifetime updates & IMHO is the best there is & the easiest to use but you will still need to use a compression program like shrink or clonedvd2 is a good one. Also nero's recode is almost the same as shrink.

saleen66 · 06-01-2007

Thanks imkidd57 for cleaning that up for me

Are there any softwares that are better than anydvd for the cost? It has a 77% thubs up rating. Anything better than that?

**imkidd57** · 06-01-2007

OK I edited out your serial key

. You normally have 30 minutes to edit a post but after that it's fixed. In such a case you can always PM a moderator or other staff member who can do the job for you.

About the question of DVD Shrink: AnyDVD is a great program and will overcome more modern copy protections than DVD Shrink, but will not compress the ripped movie to fit a single-layer disc. In that sense the two programs are not the same.

According to your answer you have overlooked the helpful post from jbv. I suggest you have a look at that and take account of the possibility that the drive is not recognising the blank DVDs you are using.

Edit: I see we all posted much the same things together

saleen66 · 06-01-2007

Hey, another question. If I have two separate computers I burn with, could I use the same anydvd key for both or are they not going to allow me to do so? Does anybody think getting the whole package deal is a good deal? Then you have free updatable software for your computer for many years and it is all the same company. DVD clone is like shrink correct? It does the burning stuff. Does it need nero also or does it use its own burning software?

Thanks.

**imkidd57** · 06-01-2007

There's quite a few specific questions there, so I'll transfer this to the SlySoft support forum we have here...

*Tru* · 07-01-2007

Quote:

Originally Posted by saleen66

Hey, another question. If I have two separate computers I burn with, could I use the same anydvd key for both

Yes.

DetroitBaseball · 07-01-2007

You can't have 1 AnyDVD key being used in 2 computers simultaneously though.

saleen66 · 07-01-2007

For the firmware update on the drive, how and where do I get that at? It is failing due to not recognising the dang DVD-R discs I use. Any help greatly appreciated.

saleen66 · 07-01-2007

Quote:

Originally Posted by jbv

Your SONY DVD RW DW-Q28A firmware Version: KFS1 don't support this mediacode.

This Sony should be a LiteOn 1693S.

Refer to this for helping me with the firmware update. Thanks.

DetroitBaseball · 07-01-2007

Quote:

Originally Posted by saleen66

Refer to this for helping me with the firmware update. Thanks.

Don't double post please.

DrinkLyeAndDie · 07-01-2007

This link may be of some use. Also check out the links in the forum I linked to.

05-01-2007	#2 (permalink)
samlar CDFreaks Resident Join Date: Dec 2003 Location: Over there Posts: 1,887	Re: Error posting from dvd shrink burn You are using a program that has not been updated in over a year and is not up to date with the copy protection for newer movies try going to slysoft and download anydvd trial and that should work for you. I think the first line in your post is the key for your nero you need to edit and remove it.

05-01-2007	#3 (permalink)
saleen66 New on Forum Join Date: Jan 2007 Posts: 17	Re: Error posting from dvd shrink burn Where the heck is the edit button for posts on here?

05-01-2007	#4 (permalink)
saleen66 New on Forum Join Date: Jan 2007 Posts: 17	Re: Error posting from dvd shrink burn I guess it wont let me edit a post after it has a reply?

05-01-2007	#5 (permalink)
saleen66 New on Forum Join Date: Jan 2007 Posts: 17	Re: Error posting from dvd shrink burn Can the admin edit my post for me?

05-01-2007	#6 (permalink)
saleen66 New on Forum Join Date: Jan 2007 Posts: 17	Re: Error posting from dvd shrink burn Is there any freeware like shrink that works with new stuff or are they all pay to use?

Today
CD Freaks	__________________ This advertising will not be shown to registered members. Register your free account today and become a member on Club CD Freaks - Knowledge is Power

06-01-2007	#9 (permalink)
saleen66 New on Forum Join Date: Jan 2007 Posts: 17	Re: Error posting from dvd shrink burn Samlar, Is anydvd a similar GUI to that of shrink? Is it as easy to use? Just want to make sure it is the right software to buy if I want an updated softwar package. Do they continue to plan on upgrading this software for those who purchase it? Thanks. Saleen66

06-01-2007	#10 (permalink)
Liquidmagic CD Freaks Senior Member Join Date: Jun 2006 Location: Bedford, Indiana USA Posts: 301	Re: Error posting from dvd shrink burn AnyDVD has lifetime updates & IMHO is the best there is & the easiest to use but you will still need to use a compression program like shrink or clonedvd2 is a good one. Also nero's recode is almost the same as shrink.

06-01-2007	#11 (permalink)
saleen66 New on Forum Join Date: Jan 2007 Posts: 17	Re: Error posting from dvd shrink burn Thanks imkidd57 for cleaning that up for me Are there any softwares that are better than anydvd for the cost? It has a 77% thubs up rating. Anything better than that?

06-01-2007	#12 (permalink)
imkidd57 Senior Moderator & Editor Join Date: Feb 2005 Location: New Fajara Posts: 7,958	Re: Error posting from dvd shrink burn OK I edited out your serial key . You normally have 30 minutes to edit a post but after that it's fixed. In such a case you can always PM a moderator or other staff member who can do the job for you. About the question of DVD Shrink: AnyDVD is a great program and will overcome more modern copy protections than DVD Shrink, but will not compress the ripped movie to fit a single-layer disc. In that sense the two programs are not the same. According to your answer you have overlooked the helpful post from jbv. I suggest you have a look at that and take account of the possibility that the drive is not recognising the blank DVDs you are using. Edit: I see we all posted much the same things together __________________ . . ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ If you are new to the internet, have a query about digital storage, or would maybe like to tell us a bit about yourself: just register with us and try either the Newbie forum or the CD Freaks Living Room. Alternatively, if you fancy some chit-chat (without technical help), then you're welcome to use the Chatbox to have a natter to other experienced members and staff. Look what you get when you join CD Freaks: Interactive access to our forum-based knowledge service Give feedback on News articles on the Front Page Ask questions to the people that actually review the software & hardware Chat with staff and members alike in the live Chatbox Option of a free newsletter Nervous about posting? Don't be: this is one of the friendliest communities around and we value our new members. You're well-protected by the forum rules that everyone signs up to. So what are you waiting for? Click the smiley to join --> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

06-01-2007	#13 (permalink)
saleen66 New on Forum Join Date: Jan 2007 Posts: 17	Re: Error posting from dvd shrink burn Hey, another question. If I have two separate computers I burn with, could I use the same anydvd key for both or are they not going to allow me to do so? Does anybody think getting the whole package deal is a good deal? Then you have free updatable software for your computer for many years and it is all the same company. DVD clone is like shrink correct? It does the burning stuff. Does it need nero also or does it use its own burning software? Thanks.

06-01-2007	#14 (permalink)
imkidd57 Senior Moderator & Editor Join Date: Feb 2005 Location: New Fajara Posts: 7,958	Re: Error posting from dvd shrink burn There's quite a few specific questions there, so I'll transfer this to the SlySoft support forum we have here... __________________ . . ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ If you are new to the internet, have a query about digital storage, or would maybe like to tell us a bit about yourself: just register with us and try either the Newbie forum or the CD Freaks Living Room. Alternatively, if you fancy some chit-chat (without technical help), then you're welcome to use the Chatbox to have a natter to other experienced members and staff. Look what you get when you join CD Freaks: Interactive access to our forum-based knowledge service Give feedback on News articles on the Front Page Ask questions to the people that actually review the software & hardware Chat with staff and members alike in the live Chatbox Option of a free newsletter Nervous about posting? Don't be: this is one of the friendliest communities around and we value our new members. You're well-protected by the forum rules that everyone signs up to. So what are you waiting for? Click the smiley to join --> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

07-01-2007	#16 (permalink)
DetroitBaseball CD Freaks Senior Member Join Date: Dec 2006 Posts: 251	Re: Error posting from dvd shrink burn You can't have 1 AnyDVD key being used in 2 computers simultaneously though.

07-01-2007	#17 (permalink)
saleen66 New on Forum Join Date: Jan 2007 Posts: 17	Re: Error posting from dvd shrink burn For the firmware update on the drive, how and where do I get that at? It is failing due to not recognising the dang DVD-R discs I use. Any help greatly appreciated.

07-01-2007	#20 (permalink)
DrinkLyeAndDie CD Freaks Senior Member Join Date: Dec 2006 Posts: 253	Re: Error posting from dvd shrink burn This link may be of some use. Also check out the links in the forum I linked to. __________________ DrinkLyeAndDie ∙ "Qui dit rien consent." ∙ "If you want to see the future imagine someone's boot stamping on the human face... forever." - George Orwell

Commercial ads

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DVD Shrink - Burn Error - Help Please!	djsushi	Copy Movie	1	06-08-2006 13:12
DVD Shrink + Nero burn error	DjZerious	Copy Movie	15	21-04-2006 04:35
DVD Shrink Burn with Nero error	alf4lyfe	Nero & InCD	6	17-04-2006 03:04
DVD Shrink - burn settings and burn speed problem	spooks	Copy Movie	14	21-08-2005 21:25
DVR-107D posting error message...	sirrus	Asus / Pioneer Burner	2	10-10-2004 03:42