creep - Club CDFreaks

newdog · 24-12-2005

cannot rip creep,tried anydvd and dvd magic ripper.please help

reasonsnotrules · 24-12-2005

what versions of these programs are you using?

where do you get an error (reading, encoding, etc.)

what exactly happens that you "can't rip"?

Is there an error message? If so, post it here.

What Region, Country, and Version of Creep are you trying to rip? (ex Creep R1 US Widescreen)

What model drive do you have and what firmware is installed?

newdog · 24-12-2005

the problem is encoding,i`m useing dvd shrink 3.2
encoding stops at 50%,i tried two seperate dvd`s and both stopped at 50%
this version is us widescreen region 1

reasonsnotrules · 24-12-2005

you didn't mention in the original post that you were using dvd shrink. are you using anydvd with it? what version of anydvd are you using?

is there an error essage when it stops at 50%? what happens?

if you're using shrink alone there are some copy protections that it can't handle. anydvd should be able to take care of it unless it's some brand new protection that we haven't come across yet. In order to determine what the issue is though I need the info I asked for. We can't help if you don't tell us anything. What happens when it stops would be especially helpful. Does your comp freeze, does it reboot itself, do you get an error message, does your computer throw itself out a window?

newdog · 24-12-2005

I am sorryfor that pitiful post.But i did like the comment about the `puter throwing itself out the window.
Iam using any dvd with dvd shrink 3.2
I obtained another copy of creep and the error message reads(failed to read file G:\
cyclic redundancy check} it happens at the 50% point. thank for your patience

jacen9 · 24-12-2005

use the upto date version's of anydvd & clonedvd2, u wont have any probs with creep

reasonsnotrules · 24-12-2005

ok, post your anydvd info window so we can see what's on this bad boy.

(sorry for the delay...i was at work for the morning)

unless there's a whole batch of bad disks, it's strange that you got a cyclic redundancy error in the same spot on both discs. even if the disc is new, try cleaning it thoroughly with a soft cloth or try it in a different drive. Some drives are better readers than others.

once you post the anydvd info window, we'll go from there.

24-12-2005	#1 (permalink)
newdog New on Forum Join Date: Dec 2005 Posts: 3	creep <a href='http://adstats.cdfreaks.com/www/delivery/ck.php?n=a13febf7&cb=INSERT_RANDOM_NUMBER_HERE' target='_blank'><img src='http://adstats.cdfreaks.com/www/delivery/avw.php?zoneid=30&cb=INSERT_RANDOM_NUMBER_HERE&n=a13febf7' border='0' alt='' /></a> cannot rip creep,tried anydvd and dvd magic ripper.please help

24-12-2005	#2 (permalink)
reasonsnotrules CD Freaks Guru Join Date: Sep 2005 Location: Massachusetts Posts: 5,304	Re: creep what versions of these programs are you using? where do you get an error (reading, encoding, etc.) what exactly happens that you "can't rip"? Is there an error message? If so, post it here. What Region, Country, and Version of Creep are you trying to rip? (ex Creep R1 US Widescreen) What model drive do you have and what firmware is installed?

24-12-2005	#3 (permalink)
newdog New on Forum Join Date: Dec 2005 Posts: 3	Re: creep the problem is encoding,i`m useing dvd shrink 3.2 encoding stops at 50%,i tried two seperate dvd`s and both stopped at 50% this version is us widescreen region 1

24-12-2005	#4 (permalink)
reasonsnotrules CD Freaks Guru Join Date: Sep 2005 Location: Massachusetts Posts: 5,304	Re: creep you didn't mention in the original post that you were using dvd shrink. are you using anydvd with it? what version of anydvd are you using? is there an error essage when it stops at 50%? what happens? if you're using shrink alone there are some copy protections that it can't handle. anydvd should be able to take care of it unless it's some brand new protection that we haven't come across yet. In order to determine what the issue is though I need the info I asked for. We can't help if you don't tell us anything. What happens when it stops would be especially helpful. Does your comp freeze, does it reboot itself, do you get an error message, does your computer throw itself out a window?

24-12-2005	#5 (permalink)
newdog New on Forum Join Date: Dec 2005 Posts: 3	Re: creep I am sorryfor that pitiful post.But i did like the comment about the `puter throwing itself out the window. Iam using any dvd with dvd shrink 3.2 I obtained another copy of creep and the error message reads(failed to read file G:\ cyclic redundancy check} it happens at the 50% point. thank for your patience

24-12-2005	#6 (permalink)
jacen9 CD Freaks Senior Member Join Date: Jun 2002 Location: s-on-t uk Posts: 423	Re: creep use the upto date version's of anydvd & clonedvd2, u wont have any probs with creep

24-12-2005	#7 (permalink)
reasonsnotrules CD Freaks Guru Join Date: Sep 2005 Location: Massachusetts Posts: 5,304	Re: creep ok, post your anydvd info window so we can see what's on this bad boy. (sorry for the delay...i was at work for the morning) unless there's a whole batch of bad disks, it's strange that you got a cyclic redundancy error in the same spot on both discs. even if the disc is new, try cleaning it thoroughly with a soft cloth or try it in a different drive. Some drives are better readers than others. once you post the anydvd info window, we'll go from there.

Commercial message