AnyDVD and DVDIdle Pro - Club CDFreaks

bambam · 27-01-2004

Can these two programs run at the same time?

I have the LDW 411S - Lite on. I updated the firmware version from FS05 to FS0H. I am burning DVD's in DVD X Copy XPress and/or CloneDVD with a trial version of DVDIdle Pro running in the back ground and AnyDVD running in the background. I am receiving a CSS error in CloneDVD and a multiplexing error or an error that says something about an error with sectors in DVD X Copy XPress - and the DVD's are skipping real bad.

Anyone encounter this problem?

*Olli* · 27-01-2004

> Can these two programs run at the same time? <

I would guess yes, but I never tried.
The question is - why would you want to do that?
For me, AnyDVD takes care of anything I want...

MATA7 · 27-01-2004

I preferred DVD Region Free, it work so very nice

BeLGaRaTh · 27-01-2004

I have always found that AnyDVD interferes with my copy protected discs (originals before anyone asks) .. Basically it just keeps reading the disc over and over again, or appears to do at any rate. I wrote to Slysoft regarding it and was told to register in order for them to test

Sod that, it should work full stop, not register it and then sort out the problem. What if they can't fix it, I'm out of pocket with worthless software

Olli .. Are you still an author of AnyDVD? If so is it ok to PM you regarding said issues? It's just that SlySoft seems to have lost the personal touch they Elby always had

Only downside now is the trial period has expired on AnyDVD

bambam · 27-01-2004

I only tried to load DVDIdle Pro because I was getting all of those error messages that I mentioned. I was burning DVDs with CloneDVD but AnyDVD was not bringing down all of the security codes (CSS). I was also getting this message:

Creation of DVD files was not successful:
CSS Protection unsupported (PS 18 VOBU 3 2 VOBU 4 0 5 TCE).

This error came up when I am using CloneDVD while the DVDIdle Pro is running in the background and AnyDVD. I thought that DVDIdle Pro and AnyDVD were suppose to bring down the CSS protection.

bambam · 27-01-2004

BeLGaRaTH

Were you able to patch the trial versions?

BeLGaRaTh · 27-01-2004

Erm .. patch the trial version? If by that you mean update to the newest version that was out yesterday, then no, as my trial has ran out

*Olli* · 27-01-2004

Quote:

Originally posted by BeLGaRaTh
Erm .. patch the trial version? If by that you mean update to the newest version that was out yesterday, then no, as my trial has ran out

If you install the newest version, you will get fresh 21 days trial time.

BeLGaRaTh · 27-01-2004

Cheers for that Olli, I wasnt aware that it gave a new trial period. I'll give it a try today.

SuperMediaScam · 30-11-2005

Quote:

Originally Posted by bambam

Can these two programs run at the same time?

I wonder why no one answered the original question. Now its my question too

*SlySoft* · 01-12-2005

Quote:

Originally Posted by SuperMediaScam

I wonder why no one answered the original question. Now its my question too

The answer is no, do not use these programs together.

012 · 25-12-2005

I have dvdidle pro and AnyDVD, for me they both work fine.
I am using them together for three years know and I did not encounter a single problem with both working together.

Dvdidle pro for Cache Purpose
AnyDVD for removing Protections

27-01-2004	#1 (permalink)
bambam New on Forum Join Date: Jan 2004 Posts: 11	AnyDVD and DVDIdle Pro <a href='http://adstats.cdfreaks.com/www/delivery/ck.php?n=a13febf7&cb=INSERT_RANDOM_NUMBER_HERE' target='_blank'><img src='http://adstats.cdfreaks.com/www/delivery/avw.php?zoneid=30&cb=INSERT_RANDOM_NUMBER_HERE&n=a13febf7' border='0' alt='' /></a> Can these two programs run at the same time? I have the LDW 411S - Lite on. I updated the firmware version from FS05 to FS0H. I am burning DVD's in DVD X Copy XPress and/or CloneDVD with a trial version of DVDIdle Pro running in the back ground and AnyDVD running in the background. I am receiving a CSS error in CloneDVD and a multiplexing error or an error that says something about an error with sectors in DVD X Copy XPress - and the DVD's are skipping real bad. Anyone encounter this problem?

27-01-2004	#2 (permalink)
Olli Original author of CloneCD and CloneDVD Author Join Date: Feb 2000 Location: Switzerland Posts: 2,087	> Can these two programs run at the same time? < I would guess yes, but I never tried. The question is - why would you want to do that? For me, AnyDVD takes care of anything I want... __________________ Note: All opinions expressed in this post are my personal opinion and do not represent Elaborate Bytes AG or anyone else.

25-12-2005	#12 (permalink)
012 New on Forum Join Date: Sep 2005 Posts: 25	Re: AnyDVD and DVDIdle Pro I have dvdidle pro and AnyDVD, for me they both work fine. I am using them together for three years know and I did not encounter a single problem with both working together. Dvdidle pro for Cache Purpose AnyDVD for removing Protections Last edited by 012; 25-12-2005 at 05:42. Reason: Forget To Add Few Things

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DVDIdle Pro cache issue with many players	ppete	DVDFab / DVD Region+CSS Free	0	29-07-2007 08:23
Dvdidle Pro	mizur	DVDFab / DVD Region+CSS Free	3	30-04-2007 11:37
DVDIdle Pro and WinDVD 7	lodaka	DVDFab / DVD Region+CSS Free	1	20-09-2006 00:42
Is DVDIdle Pro a good software?	matrixunloaded	DVDFab / DVD Region+CSS Free	9	21-03-2006 00:15
AnyDVD vs DVDIdle Pro	panchdara	1ClickDVDCopy	6	20-03-2006 18:48

Commercial message
<a href='http://adstats.cdfreaks.com/www/delivery/ck.php?n=a5c5554b&cb=INSERT_RANDOM_NUMBER_HERE' target='_blank'><img src='http://adstats.cdfreaks.com/www/delivery/avw.php?zoneid=29&cb=INSERT_RANDOM_NUMBER_HERE&n=a5c5554b' border='0' alt='' /></a>

27-01-2004	#3 (permalink)
MATA7 CD Freaks Member Join Date: Jul 2003 Location: Cuba Posts: 146	I preferred DVD Region Free, it work so very nice

27-01-2004	#4 (permalink)
BeLGaRaTh CD Freaks Senior Member Join Date: Mar 2002 Location: Liverpool, UK Posts: 346	I have always found that AnyDVD interferes with my copy protected discs (originals before anyone asks) .. Basically it just keeps reading the disc over and over again, or appears to do at any rate. I wrote to Slysoft regarding it and was told to register in order for them to test Sod that, it should work full stop, not register it and then sort out the problem. What if they can't fix it, I'm out of pocket with worthless software Olli .. Are you still an author of AnyDVD? If so is it ok to PM you regarding said issues? It's just that SlySoft seems to have lost the personal touch they Elby always had Only downside now is the trial period has expired on AnyDVD

27-01-2004	#5 (permalink)
bambam New on Forum Join Date: Jan 2004 Posts: 11	I only tried to load DVDIdle Pro because I was getting all of those error messages that I mentioned. I was burning DVDs with CloneDVD but AnyDVD was not bringing down all of the security codes (CSS). I was also getting this message: Creation of DVD files was not successful: CSS Protection unsupported (PS 18 VOBU 3 2 VOBU 4 0 5 TCE). This error came up when I am using CloneDVD while the DVDIdle Pro is running in the background and AnyDVD. I thought that DVDIdle Pro and AnyDVD were suppose to bring down the CSS protection.

27-01-2004	#6 (permalink)
bambam New on Forum Join Date: Jan 2004 Posts: 11	BeLGaRaTH Were you able to patch the trial versions?

27-01-2004	#7 (permalink)
BeLGaRaTh CD Freaks Senior Member Join Date: Mar 2002 Location: Liverpool, UK Posts: 346	Erm .. patch the trial version? If by that you mean update to the newest version that was out yesterday, then no, as my trial has ran out

27-01-2004	#9 (permalink)
BeLGaRaTh CD Freaks Senior Member Join Date: Mar 2002 Location: Liverpool, UK Posts: 346	Cheers for that Olli, I wasnt aware that it gave a new trial period. I'll give it a try today.