Communication error with new PIONEER DVR 111? Please help if you can. - Club CDFreaks

bad_cardsuk · 09-04-2006

Well after shopping around a bit this morning I decided to go against my initial plan of NOT buying Pioneer DVD drive in order to try out a different brand for a change and I ended up purchasing a DVR 111.

So, I take out my old drive (DVR 109) and plug the new one in, Windows finds it no problem.

When I try to burn an image I have on my HD with DVD Decrypter I get an IO error every time, when I try with Nero I get a communication failed error every time. Both programmes recognise the drive.

Does anyone have any idea's how i can fix this? I've tried a couple of different images at both x8 and x4 with no joy.

Thanks for reading guys.

*_chef_* · 09-04-2006

Wrong IDE cable or PSU too weak...

bad_cardsuk · 09-04-2006

I'm using the same IDE I used with my 109, do i need a different onefor use with the 111?

Processor runs at 2.4 gb, hardy brand new technology but plenty enough to run a burner.

bad_cardsuk · 09-04-2006

Adding DVD Decrypter and Nero logs below...

DVD DECYPTER LOG 3.5.4.0
I 16:54:39 DVD Decrypter Version 3.5.4.0 started!
I 16:54:39 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)
I 16:54:39 Initialising SPTI...
I 16:54:39 Searching for SCSI / ATAPI devices...
I 16:54:39 Found 1 DVD-ROM and 1 DVD±RW!
I 16:54:50 Operation Started!
I 16:54:50 Source File: C:\Documents and Settings\Administrator\Desktop\MY_DISC.ISO
I 16:54:50 Source File Sectors: 2,176,912 (MODE1/2048)
I 16:54:50 Source File Size: 4,458,315,776 bytes
I 16:54:50 Source File Application Identifier: NERO BURNING ROM
I 16:54:50 Destination Device: [3:0:0] PIONEER DVD-RW DVR-111D 1.02 (D

(ATA)
I 16:54:50 Destination Media Type: DVD-R (Disc ID: RITEKG05) (Speeds: 4x, 6x, 8x)
I 16:54:50 Destination Media Sectors: 2,297,888
I 16:54:50 Write Mode: DVD
I 16:54:50 Write Type: SAO
I 16:54:50 Write Speed: 4x
I 16:54:50 Link Size: Auto
I 16:54:50 Test Mode: No
I 16:54:50 BURN-Proof: Enabled
I 16:54:50 Filling Buffer...
I 16:54:54 Writing LeadIn...
W 16:54:54 Failed to Write Sectors 0 - 31 - Logical Unit Communication CRC Error (ULTRA-DMA/32)
W 16:54:54 Retrying (1 of 20)...
W 16:54:54 Retry Failed - Logical Unit Communication CRC Error (ULTRA-DMA/32)
W 16:54:54 Retrying (2 of 20)...
W 16:54:54 Retry Failed - Logical Unit Communication CRC Error (ULTRA-DMA/32)
W 16:54:54 Retrying (3 of 20)...
W 16:54:54 Retry Failed - Logical Unit Communication CRC Error (ULTRA-DMA/32)
W 16:54:54 Retrying (4 of 20)...
W 16:54:54 Retry Failed - Logical Unit Communication CRC Error (ULTRA-DMA/32)
W 16:54:54 Retrying (5 of 20)...
W 16:54:54 Retry Failed - Logical Unit Communication CRC Error (ULTRA-DMA/32)
W 16:54:54 Retrying (6 of 20)...
W 16:54:54 Retry Failed - Logical Unit Communication CRC Error (ULTRA-DMA/32)
W 16:54:54 Retrying (7 of 20)...
W 16:54:54 Retry Failed - Logical Unit Communication CRC Error (ULTRA-DMA/32)
W 16:54:54 Retrying (8 of 20)...
W 16:54:54 Retry Failed - Logical Unit Communication CRC Error (ULTRA-DMA/32)
W 16:54:54 Retrying (9 of 20)...
W 16:54:54 Retry Failed - Logical Unit Communication CRC Error (ULTRA-DMA/32)
W 16:54:54 Retrying (10 of 20)...
W 16:54:54 Retry Failed - Logical Unit Communication CRC Error (ULTRA-DMA/32)
W 16:54:54 Retrying (11 of 20)...
W 16:54:54 Retry Failed - Logical Unit Communication CRC Error (ULTRA-DMA/32)
W 16:54:54 Retrying (12 of 20)...
W 16:54:54 Retry Failed - Logical Unit Communication CRC Error (ULTRA-DMA/32)
W 16:54:54 Retrying (13 of 20)...
W 16:54:54 Retry Failed - Logical Unit Communication CRC Error (ULTRA-DMA/32)
W 16:54:54 Retrying (14 of 20)...
W 16:54:54 Retry Failed - Logical Unit Communication CRC Error (ULTRA-DMA/32)
W 16:54:54 Retrying (15 of 20)...
W 16:54:54 Retry Failed - Logical Unit Communication CRC Error (ULTRA-DMA/32)
W 16:54:54 Retrying (16 of 20)...
W 16:54:54 Retry Failed - Logical Unit Communication CRC Error (ULTRA-DMA/32)
W 16:54:54 Retrying (17 of 20)...
W 16:54:54 Retry Failed - Logical Unit Communication CRC Error (ULTRA-DMA/32)
W 16:54:54 Retrying (18 of 20)...
W 16:54:54 Retry Failed - Logical Unit Communication CRC Error (ULTRA-DMA/32)
W 16:54:54 Retrying (19 of 20)...
W 16:54:54 Retry Failed - Logical Unit Communication CRC Error (ULTRA-DMA/32)
W 16:54:54 Retrying (20 of 20)...
W 16:54:54 Retry Failed! - Logical Unit Communication CRC Error (ULTRA-DMA/32)
E 16:54:58 Failed to Write Sectors 0 - 31 - Logical Unit Communication CRC Error (ULTRA-DMA/32)
I 16:54:58 Synchronising Cache...
E 16:55:11 Failed to Write Image!
E 16:55:11 Operation Failed! - Duration: 00:00:21
I 16:55:12 Average Write Rate: N/A - Maximum Write Rate: N/A

NERO 6.6.0.16 LOG
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: Version: 1.02 - HA 3 TA 0 - 6.6.0.16
Adapter driver: HA 3
Drive buffer : 2000kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: Version: 1.0 - HA 5 TA 0 - 6.6.0.16
Adapter driver: HA 5

=== Scsi-Device-Map ===
DiskPeripheral : IC35L080AVVA07-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-111D atapi Port 3 ID 0 DMA: On
CdRomPeripheral : LU9094Y FSZ459K 1.0 dtscsi Port 5 ID 0 DMA: Off

=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-111D D: CDRom4
LU9094Y FSZ459K F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 639MB (654832kB)
Free physical memory: 256MB (263128kB)
Memory in use : 59 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

9.4.2006
ISO compilation
16:58:54 #1 Text 0 File Isodoc.cpp, Line 6356
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

16:58:55 #2 Text 0 File Reader.cpp, Line 127
Reader running

16:58:55 #3 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD-RW DVR-111D running

16:58:55 #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

16:58:55 #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

16:59:30 #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2146191 (476:55.66, 4191MB)

16:59:30 #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

16:59:30 #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: PIONEER DVD-RW DVR-111D, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193

16:59:30 #9 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Disc not writeable. Insert writeable disc.
(Medium in drive: DVD-R. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-R DL, DVD+R DL.)

16:59:30 #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2146192 (2146192) = #2146192/476:55.67
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2146192 blocks [PIONEER DVD-RW DVR-111D]
--------------------------------------------------------------

16:59:30 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [PIONEER DVD-RW DVR-111D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4395401216, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2146192 | lead-out | 1 | 0x41 | 0x00

16:59:31 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

16:59:31 #13 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.

16:59:31 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

16:59:31 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)

16:59:31 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

16:59:31 #17 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode

16:59:31 #18 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Buffer underrun protection -> ON

16:59:31 #19 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes

16:59:31 #20 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

16:59:42 #21 SCSI -1024 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x06910000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x08
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x08 0x03

16:59:42 #22 CDR -1024 File Writer.cpp, Line 311
Communication failure

16:59:42 #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

16:59:42 #24 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

16:59:42 #25 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was -1

17:00:08 #26 Phase 39 File dlgbrnst.cpp, Line 1832
Burn process aborted

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 11/03/2005 18:28:14 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 22:59:44 (Adapter driver for rec)
File 'Drivers\dtscsi.sys': Ver=?.?.?.?, size=223128 bytes, created 02/03/2006 12:56:03 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

*_chef_* · 09-04-2006

Update the burners firmware to 1.06.
Then update Nero to 6.6.1.4.
Then try with better media.

bad_cardsuk · 09-04-2006

I have already tried it with Nero's latest version on the website incase it was an issue of the drive being too new for the version I was running. It still error'd and gave me this: DMA-driver error, CRC error.

The media I'm using is RITEKG05.

I didn't wanna flash the drive JUST yet incase I need to return it.....but if it's my only option.

*_chef_* · 09-04-2006

Where and how is the drive connected to?
Is it running in UDMA 4 mode?

bad_cardsuk · 09-04-2006

It's connected to Channel Two > Master via IDE.

It is running in UDMA 4 Mode, yes.

*_chef_* · 09-04-2006

And it's jumpered as Master or Cable-select?

If yes, could be something with the drive, or cable, or PSU.... :-(

bad_cardsuk · 09-04-2006

Sorry it's Secondary master not Primary master, my mistake.

The jumper is set to the factory default of Master.

*_chef_* · 09-04-2006

What PSU is in the system, with what specs?

bad_cardsuk · 09-04-2006

I have a P4 chip running at 2.4.
2 x 512MB of DDR
Running XP with SP2.

By the way I really appeciate the help here. Thank you.

*_chef_* · 09-04-2006

And the PSU on the system? What model and what power?

bad_cardsuk · 09-04-2006

I'm unsure, I can't actually see the label because the little shelf it sits on obscures most of the sticker.

Do you think it could be that? I mean it ran my old burner with no problem.

Thanks.

bad_cardsuk · 09-04-2006

Okay I just managed to burn a DVD.

I removed the Secondary IDE lead that it was connected it to and set my computer up thus:

Primary master - hard drive
Primary slave - Pioneer DVR 111

And it worked a treat. So I don't know if it's down to the original IDE lead or not?

My question is, is it okay to have the HD & burner on the same IDE lead? Or would it be better to get a new lead and try the 111 on the secondary channel?

Thanks for the help!

*_chef_* · 10-04-2006

If possible, the 111 should be Master.
So connecting and setting it up as Secondary Master would be recommended.

The_Dude · 10-04-2006

Could simply be that the cable was not quite seated perfectly when you removed it from the 109 and plugged it back in to the 111. That could be on the drive end or on the motherboard end.

Possible (although less likely) is that the action of changing the drive was enough for the cable to develop a bad spot in one of the 40 wires, and thus you may now need a new IDE cable.

bad_cardsuk · 15-04-2006

Okay...

After a few days....I borrowed an IDE lead from a friend's old PC and connected the burner up as master on the secondary IDE channel and it still works suggesting a dodgy cable on earlier tests.

Either way...I'm a happy camper now!

Thanks a lot to all of you for helping, it's always appreciated.

CHEERS ALL!

bryce_boi · 11-06-2006

im having this exacly same problem. i've tried changing the data cable but with no luck.

i just keep getting this exact same communication failure with nero. (the log is identical)

the drive worked perfect when i only had 2 drives set up. as follows.

IDE0 - Master - HDD
IDE1 - Master - DVD-rw

now i've changed it to....

IDE0 - Master - HDD
IDE0 - Slave - HDD2
IDE1 - Master - DVD-rw
IDE1 - Slave - DVD-rom

all the jumper settings are correct and all the connections are secure, i cant figour it out

Please please please help, so fare i've successfully made about 20 costers.

*_chef_* · 11-06-2006

First update Nero, then check the BIOS settings, especially for DMA mode.
Then unplug the 2nd ODD (dvd-rom) and try again.

And post a logfile if possible - remove serials!

bryce_boi · 11-06-2006

did it, i disconnected the DVD-rom. then i also changed the IDE ribbon whilst i was at it to a 40pin one... i checked bios, and changed UDMA from "auto" to "UDMA-4" and updated nero, and now all seems to be fine, can i reconnect my other DVD drive or is it best i just dont have one at all since i dont know witch of these made it work....

09-04-2006	#1 (permalink)
bad_cardsuk New on Forum Join Date: Feb 2003 Posts: 13	Communication error with new PIONEER DVR 111? Please help if you can. Well after shopping around a bit this morning I decided to go against my initial plan of NOT buying Pioneer DVD drive in order to try out a different brand for a change and I ended up purchasing a DVR 111. So, I take out my old drive (DVR 109) and plug the new one in, Windows finds it no problem. When I try to burn an image I have on my HD with DVD Decrypter I get an IO error every time, when I try with Nero I get a communication failed error every time. Both programmes recognise the drive. Does anyone have any idea's how i can fix this? I've tried a couple of different images at both x8 and x4 with no joy. Thanks for reading guys.

09-04-2006	#2 (permalink)
_chef_ CDFreaks Resident Join Date: Aug 2004 Location: @FX labs .de ...watching [Bender's.Game] [Tripping.The.Rift.The.Movie] Posts: 24,315	Re: Communication error with new PIONEER DVR 111? Please help if you can. Wrong IDE cable or PSU too weak... __________________ Started with burning capable optical drives (CD-R) in 1997. Bought optical drives from AOpen, HP, LiteOn, NEC, Philips, Pioneer, Plextor, Ricoh, Samsung, Sanyo, Toshiba and Yamaha. *'Things are now in motion that cannot be undone.' [Gandalf, LoTR]* Enable DMA with micrAp$0ft Enable DMA free at your will busTRACE => Upper/Lower Filters Util DevCon *HOW TO ... Delete the Upper & Lower Filters!* If you expect help then please start by using the powerful SEARCH.

09-04-2006	#3 (permalink)
bad_cardsuk New on Forum Join Date: Feb 2003 Posts: 13	Re: Communication error with new PIONEER DVR 111? Please help if you can. I'm using the same IDE I used with my 109, do i need a different onefor use with the 111? Processor runs at 2.4 gb, hardy brand new technology but plenty enough to run a burner.

09-04-2006	#4 (permalink)
bad_cardsuk New on Forum Join Date: Feb 2003 Posts: 13	Re: Communication error with new PIONEER DVR 111? Please help if you can. Adding DVD Decrypter and Nero logs below... DVD DECYPTER LOG 3.5.4.0 I 16:54:39 DVD Decrypter Version 3.5.4.0 started! I 16:54:39 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 16:54:39 Initialising SPTI... I 16:54:39 Searching for SCSI / ATAPI devices... I 16:54:39 Found 1 DVD-ROM and 1 DVD±RW! I 16:54:50 Operation Started! I 16:54:50 Source File: C:\Documents and Settings\Administrator\Desktop\MY_DISC.ISO I 16:54:50 Source File Sectors: 2,176,912 (MODE1/2048) I 16:54:50 Source File Size: 4,458,315,776 bytes I 16:54:50 Source File Application Identifier: NERO BURNING ROM I 16:54:50 Destination Device: [3:0:0] PIONEER DVD-RW DVR-111D 1.02 (D (ATA) I 16:54:50 Destination Media Type: DVD-R (Disc ID: RITEKG05) (Speeds: 4x, 6x, 8x) I 16:54:50 Destination Media Sectors: 2,297,888 I 16:54:50 Write Mode: DVD I 16:54:50 Write Type: SAO I 16:54:50 Write Speed: 4x I 16:54:50 Link Size: Auto I 16:54:50 Test Mode: No I 16:54:50 BURN-Proof: Enabled I 16:54:50 Filling Buffer... I 16:54:54 Writing LeadIn... W 16:54:54 Failed to Write Sectors 0 - 31 - Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:54:54 Retrying (1 of 20)... W 16:54:54 Retry Failed - Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:54:54 Retrying (2 of 20)... W 16:54:54 Retry Failed - Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:54:54 Retrying (3 of 20)... W 16:54:54 Retry Failed - Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:54:54 Retrying (4 of 20)... W 16:54:54 Retry Failed - Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:54:54 Retrying (5 of 20)... W 16:54:54 Retry Failed - Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:54:54 Retrying (6 of 20)... W 16:54:54 Retry Failed - Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:54:54 Retrying (7 of 20)... W 16:54:54 Retry Failed - Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:54:54 Retrying (8 of 20)... W 16:54:54 Retry Failed - Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:54:54 Retrying (9 of 20)... W 16:54:54 Retry Failed - Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:54:54 Retrying (10 of 20)... W 16:54:54 Retry Failed - Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:54:54 Retrying (11 of 20)... W 16:54:54 Retry Failed - Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:54:54 Retrying (12 of 20)... W 16:54:54 Retry Failed - Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:54:54 Retrying (13 of 20)... W 16:54:54 Retry Failed - Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:54:54 Retrying (14 of 20)... W 16:54:54 Retry Failed - Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:54:54 Retrying (15 of 20)... W 16:54:54 Retry Failed - Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:54:54 Retrying (16 of 20)... W 16:54:54 Retry Failed - Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:54:54 Retrying (17 of 20)... W 16:54:54 Retry Failed - Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:54:54 Retrying (18 of 20)... W 16:54:54 Retry Failed - Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:54:54 Retrying (19 of 20)... W 16:54:54 Retry Failed - Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:54:54 Retrying (20 of 20)... W 16:54:54 Retry Failed! - Logical Unit Communication CRC Error (ULTRA-DMA/32) E 16:54:58 Failed to Write Sectors 0 - 31 - Logical Unit Communication CRC Error (ULTRA-DMA/32) I 16:54:58 Synchronising Cache... E 16:55:11 Failed to Write Image! E 16:55:11 Operation Failed! - Duration: 00:00:21 I 16:55:12 Average Write Rate: N/A - Maximum Write Rate: N/A NERO 6.6.0.16 LOG Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34 Nero Version: 6.6.0.16 Internal Version: 6, 6, 0, 16b (Nero Express) Recorder: Version: 1.02 - HA 3 TA 0 - 6.6.0.16 Adapter driver: HA 3 Drive buffer : 2000kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: Version: 1.0 - HA 5 TA 0 - 6.6.0.16 Adapter driver: HA 5 === Scsi-Device-Map === DiskPeripheral : IC35L080AVVA07-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : PIONEER DVD-RW DVR-111D atapi Port 3 ID 0 DMA: On CdRomPeripheral : LU9094Y FSZ459K 1.0 dtscsi Port 5 ID 0 DMA: Off === CDRom-Device-Map === PIONEER DVD-RW DVR-111D D: CDRom4 LU9094Y FSZ459K F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 639MB (654832kB) Free physical memory: 256MB (263128kB) Memory in use : 59 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 9.4.2006 ISO compilation 16:58:54 #1 Text 0 File Isodoc.cpp, Line 6356 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 16:58:55 #2 Text 0 File Reader.cpp, Line 127 Reader running 16:58:55 #3 Text 0 File Writer.cpp, Line 122 Writer PIONEER DVD-RW DVR-111D running 16:58:55 #4 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 16:58:55 #5 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 16:59:30 #6 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2146191 (476:55.66, 4191MB) 16:59:30 #7 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 16:59:30 #8 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: PIONEER DVD-RW DVR-111D, Media type: DVD-R Disc Manufacturer: RITEKG - 05 Disc Application Code: 64, Disc Physical Code: 193 16:59:30 #9 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= Disc not writeable. Insert writeable disc. (Medium in drive: DVD-R. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-R DL, DVD+R DL.) 16:59:30 #10 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2146192 (2146192) = #2146192/476:55.67 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2146192 blocks [PIONEER DVD-RW DVR-111D] -------------------------------------------------------------- 16:59:30 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [PIONEER DVD-RW DVR-111D] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4395401216, ISRC "" DAO layout: =========== __Start_\|____Track_\|_Idx_\|_CtrlAdr_\|_RecDep__________ 0 \| lead-in \| 0 \| 0x41 \| 0x00 0 \| 1 \| 0 \| 0x41 \| 0x00 0 \| 1 \| 1 \| 0x41 \| 0x00 2146192 \| lead-out \| 1 \| 0x41 \| 0x00 16:59:31 #12 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 16:59:31 #13 Text 0 File Burncd.cpp, Line 4120 Cache writing successful. 16:59:31 #14 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 16:59:31 #15 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 8x (11,080 KB/s) 16:59:31 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 16:59:31 #17 Text 0 File DVDR.cpp, Line 2379 Recording mode: Sequential Recording Mode 16:59:31 #18 Text 0 File Mmc.cpp, Line 21708 Set BUFE: Buffer underrun protection -> ON 16:59:31 #19 Text 0 File DVDR.cpp, Line 2534 Start write address at LBA 0 DVD high compatibility mode: Yes 16:59:31 #20 Text 0 File Cdrdrv.cpp, Line 8862 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0.............. 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 16:59:42 #21 SCSI -1024 File Cdrdrv.cpp, Line 1434 SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x06910000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x08 Sense Qual: 0x03 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x08 0x03 16:59:42 #22 CDR -1024 File Writer.cpp, Line 311 Communication failure 16:59:42 #23 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 16:59:42 #24 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 16:59:42 #25 Text 0 File DVDR.cpp, Line 2774 EndDAO: Last written address was -1 17:00:08 #26 Phase 39 File dlgbrnst.cpp, Line 1832 Burn process aborted Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 11/03/2005 18:28:14 (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 22:59:44 (Adapter driver for rec) File 'Drivers\dtscsi.sys': Ver=?.?.?.?, size=223128 bytes, created 02/03/2006 12:56:03 (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

09-04-2006	#5 (permalink)
_chef_ CDFreaks Resident Join Date: Aug 2004 Location: @FX labs .de ...watching [Bender's.Game] [Tripping.The.Rift.The.Movie] Posts: 24,315	Re: Communication error with new PIONEER DVR 111? Please help if you can. Update the burners firmware to 1.06. Then update Nero to 6.6.1.4. Then try with better media. __________________ Started with burning capable optical drives (CD-R) in 1997. Bought optical drives from AOpen, HP, LiteOn, NEC, Philips, Pioneer, Plextor, Ricoh, Samsung, Sanyo, Toshiba and Yamaha. *'Things are now in motion that cannot be undone.' [Gandalf, LoTR]* Enable DMA with micrAp$0ft Enable DMA free at your will busTRACE => Upper/Lower Filters Util DevCon *HOW TO ... Delete the Upper & Lower Filters!* If you expect help then please start by using the powerful SEARCH.

Today
CD Freaks	__________________ This advertising will not be shown to registered members. Register your free account today and become a member on Club CD Freaks - Knowledge is Power

09-04-2006	#6 (permalink)
bad_cardsuk New on Forum Join Date: Feb 2003 Posts: 13	Re: Communication error with new PIONEER DVR 111? Please help if you can. I have already tried it with Nero's latest version on the website incase it was an issue of the drive being too new for the version I was running. It still error'd and gave me this: DMA-driver error, CRC error. The media I'm using is RITEKG05. I didn't wanna flash the drive JUST yet incase I need to return it.....but if it's my only option.

09-04-2006	#7 (permalink)
_chef_ CDFreaks Resident Join Date: Aug 2004 Location: @FX labs .de ...watching [Bender's.Game] [Tripping.The.Rift.The.Movie] Posts: 24,315	Re: Communication error with new PIONEER DVR 111? Please help if you can. Where and how is the drive connected to? Is it running in UDMA 4 mode? __________________ Started with burning capable optical drives (CD-R) in 1997. Bought optical drives from AOpen, HP, LiteOn, NEC, Philips, Pioneer, Plextor, Ricoh, Samsung, Sanyo, Toshiba and Yamaha. *'Things are now in motion that cannot be undone.' [Gandalf, LoTR]* Enable DMA with micrAp$0ft Enable DMA free at your will busTRACE => Upper/Lower Filters Util DevCon *HOW TO ... Delete the Upper & Lower Filters!* If you expect help then please start by using the powerful SEARCH.

09-04-2006	#8 (permalink)
bad_cardsuk New on Forum Join Date: Feb 2003 Posts: 13	Re: Communication error with new PIONEER DVR 111? Please help if you can. It's connected to Channel Two > Master via IDE. It is running in UDMA 4 Mode, yes.

09-04-2006	#9 (permalink)
_chef_ CDFreaks Resident Join Date: Aug 2004 Location: @FX labs .de ...watching [Bender's.Game] [Tripping.The.Rift.The.Movie] Posts: 24,315	Re: Communication error with new PIONEER DVR 111? Please help if you can. And it's jumpered as Master or Cable-select? If yes, could be something with the drive, or cable, or PSU.... :-( __________________ Started with burning capable optical drives (CD-R) in 1997. Bought optical drives from AOpen, HP, LiteOn, NEC, Philips, Pioneer, Plextor, Ricoh, Samsung, Sanyo, Toshiba and Yamaha. *'Things are now in motion that cannot be undone.' [Gandalf, LoTR]* Enable DMA with micrAp$0ft Enable DMA free at your will busTRACE => Upper/Lower Filters Util DevCon *HOW TO ... Delete the Upper & Lower Filters!* If you expect help then please start by using the powerful SEARCH.

09-04-2006	#10 (permalink)
bad_cardsuk New on Forum Join Date: Feb 2003 Posts: 13	Re: Communication error with new PIONEER DVR 111? Please help if you can. Sorry it's Secondary master not Primary master, my mistake. The jumper is set to the factory default of Master.

09-04-2006	#11 (permalink)
_chef_ CDFreaks Resident Join Date: Aug 2004 Location: @FX labs .de ...watching [Bender's.Game] [Tripping.The.Rift.The.Movie] Posts: 24,315	Re: Communication error with new PIONEER DVR 111? Please help if you can. What PSU is in the system, with what specs? __________________ Started with burning capable optical drives (CD-R) in 1997. Bought optical drives from AOpen, HP, LiteOn, NEC, Philips, Pioneer, Plextor, Ricoh, Samsung, Sanyo, Toshiba and Yamaha. *'Things are now in motion that cannot be undone.' [Gandalf, LoTR]* Enable DMA with micrAp$0ft Enable DMA free at your will busTRACE => Upper/Lower Filters Util DevCon *HOW TO ... Delete the Upper & Lower Filters!* If you expect help then please start by using the powerful SEARCH.

09-04-2006	#12 (permalink)
bad_cardsuk New on Forum Join Date: Feb 2003 Posts: 13	Re: Communication error with new PIONEER DVR 111? Please help if you can. I have a P4 chip running at 2.4. 2 x 512MB of DDR Running XP with SP2. By the way I really appeciate the help here. Thank you.

09-04-2006	#13 (permalink)
_chef_ CDFreaks Resident Join Date: Aug 2004 Location: @FX labs .de ...watching [Bender's.Game] [Tripping.The.Rift.The.Movie] Posts: 24,315	Re: Communication error with new PIONEER DVR 111? Please help if you can. And the PSU on the system? What model and what power? __________________ Started with burning capable optical drives (CD-R) in 1997. Bought optical drives from AOpen, HP, LiteOn, NEC, Philips, Pioneer, Plextor, Ricoh, Samsung, Sanyo, Toshiba and Yamaha. *'Things are now in motion that cannot be undone.' [Gandalf, LoTR]* Enable DMA with micrAp$0ft Enable DMA free at your will busTRACE => Upper/Lower Filters Util DevCon *HOW TO ... Delete the Upper & Lower Filters!* If you expect help then please start by using the powerful SEARCH.

09-04-2006	#14 (permalink)
bad_cardsuk New on Forum Join Date: Feb 2003 Posts: 13	Re: Communication error with new PIONEER DVR 111? Please help if you can. I'm unsure, I can't actually see the label because the little shelf it sits on obscures most of the sticker. Do you think it could be that? I mean it ran my old burner with no problem. Thanks.

Commercial ads

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pioneer DVR-710 (DVR-111) for $15 AR plus Shipping	negritude	CD Freaks Bargain Basement	12	10-06-2007 05:46
Pioneer DVR-710 crossflashed to DVR-111?	budzos	Asus / Pioneer Burner	87	14-05-2007 09:56
Pioneer DVR-111/D	Bhairav	Asus / Pioneer Burner	626	31-03-2007 10:53
Pioneer DVR-111 or DVR 111D?	millsybjj	Asus / Pioneer Burner	33	27-04-2006 22:07
Communication Error on Pioneer 106	slysy	Nero & InCD	2	29-01-2004 08:04

09-04-2006	#15 (permalink)
bad_cardsuk New on Forum Join Date: Feb 2003 Posts: 13	Re: Communication error with new PIONEER DVR 111? Please help if you can. Okay I just managed to burn a DVD. I removed the Secondary IDE lead that it was connected it to and set my computer up thus: Primary master - hard drive Primary slave - Pioneer DVR 111 And it worked a treat. So I don't know if it's down to the original IDE lead or not? My question is, is it okay to have the HD & burner on the same IDE lead? Or would it be better to get a new lead and try the 111 on the secondary channel? Thanks for the help!

10-04-2006	#16 (permalink)
_chef_ CDFreaks Resident Join Date: Aug 2004 Location: @FX labs .de ...watching [Bender's.Game] [Tripping.The.Rift.The.Movie] Posts: 24,315	Re: Communication error with new PIONEER DVR 111? Please help if you can. If possible, the 111 should be Master. So connecting and setting it up as Secondary Master would be recommended. __________________ Started with burning capable optical drives (CD-R) in 1997. Bought optical drives from AOpen, HP, LiteOn, NEC, Philips, Pioneer, Plextor, Ricoh, Samsung, Sanyo, Toshiba and Yamaha. *'Things are now in motion that cannot be undone.' [Gandalf, LoTR]* Enable DMA with micrAp$0ft Enable DMA free at your will busTRACE => Upper/Lower Filters Util DevCon *HOW TO ... Delete the Upper & Lower Filters!* If you expect help then please start by using the powerful SEARCH.

10-04-2006	#17 (permalink)
The_Dude CD Freaks Member Join Date: Jul 2004 Location: Northern California Posts: 126	Re: Communication error with new PIONEER DVR 111? Please help if you can. Could simply be that the cable was not quite seated perfectly when you removed it from the 109 and plugged it back in to the 111. That could be on the drive end or on the motherboard end. Possible (although less likely) is that the action of changing the drive was enough for the cable to develop a bad spot in one of the 40 wires, and thus you may now need a new IDE cable. __________________ Pioneer 111D@111L - 8.29 Buffalo/TDB (MCSE-read-unlock) NEC 2500A@2510 - Herrie's 1.08 v3-2

15-04-2006	#18 (permalink)
bad_cardsuk New on Forum Join Date: Feb 2003 Posts: 13	Re: Communication error with new PIONEER DVR 111? Please help if you can. Okay... After a few days....I borrowed an IDE lead from a friend's old PC and connected the burner up as master on the secondary IDE channel and it still works suggesting a dodgy cable on earlier tests. Either way...I'm a happy camper now! Thanks a lot to all of you for helping, it's always appreciated. CHEERS ALL!

11-06-2006	#19 (permalink)
bryce_boi New on Forum Join Date: Jun 2006 Posts: 3	Re: Communication error with new PIONEER DVR 111? Please help if you can. im having this exacly same problem. i've tried changing the data cable but with no luck. i just keep getting this exact same communication failure with nero. (the log is identical) the drive worked perfect when i only had 2 drives set up. as follows. IDE0 - Master - HDD IDE1 - Master - DVD-rw now i've changed it to.... IDE0 - Master - HDD IDE0 - Slave - HDD2 IDE1 - Master - DVD-rw IDE1 - Slave - DVD-rom all the jumper settings are correct and all the connections are secure, i cant figour it out Please please please help, so fare i've successfully made about 20 costers.

11-06-2006	#20 (permalink)
_chef_ CDFreaks Resident Join Date: Aug 2004 Location: @FX labs .de ...watching [Bender's.Game] [Tripping.The.Rift.The.Movie] Posts: 24,315	Re: Communication error with new PIONEER DVR 111? Please help if you can. First update Nero, then check the BIOS settings, especially for DMA mode. Then unplug the 2nd ODD (dvd-rom) and try again. And post a logfile if possible - remove serials! __________________ Started with burning capable optical drives (CD-R) in 1997. Bought optical drives from AOpen, HP, LiteOn, NEC, Philips, Pioneer, Plextor, Ricoh, Samsung, Sanyo, Toshiba and Yamaha. *'Things are now in motion that cannot be undone.' [Gandalf, LoTR]* Enable DMA with micrAp$0ft Enable DMA free at your will busTRACE => Upper/Lower Filters Util DevCon *HOW TO ... Delete the Upper & Lower Filters!* If you expect help then please start by using the powerful SEARCH.

11-06-2006	#21 (permalink)
bryce_boi New on Forum Join Date: Jun 2006 Posts: 3	Re: Communication error with new PIONEER DVR 111? Please help if you can. did it, i disconnected the DVD-rom. then i also changed the IDE ribbon whilst i was at it to a 40pin one... i checked bios, and changed UDMA from "auto" to "UDMA-4" and updated nero, and now all seems to be fine, can i reconnect my other DVD drive or is it best i just dont have one at all since i dont know witch of these made it work....