Cant turn on dma.. - Club CDFreaks

downloader · 10-05-2006

I have read various threads and suggestions, i have managed to get it going a few times by setting to pio mode then restarting then reinstating dma and restarting and uninstalling drives....now i cant turn it on at all....nero reports dma off for ALL drives, windows says they are using ultra dma 4....here is my nero log....

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 13:06:00
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32

NT-SPTI used
Nero Version: 7.0.0.0
Recorder: Version: 1.58 - HA 1 TA 0 - 7.0.0.0
Adapter driver: HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: Version: 1.0 - HA 1 TA 3 - 7.0.0.0
Adapter driver: HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : PIONEER DVD-RW DVR-109 nvata Port 0 ID 0 DMA: Off
CdRomPeripheral : PIONEER DVD-RW DVR-109 nvata Port 0 ID 2 DMA: Off
DiskPeripheral : Maxtor 6L250S0 nvata Port 1 ID 0 DMA: Off
DiskPeripheral : Maxtor 6Y120M0 nvata Port 1 ID 2 DMA: Off
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-109 G: CDRom0
PIONEER DVD-RW DVR-109 I: CDRom1
Generic DVD-ROM J: CDRom3
SCSIVAX DVD/CD-ROM N: CDRom2
=======================

AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 47MB (48944kB)
Memory in use : 90 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

10.5.2006
Burn DVD Image
21:13:50 #1 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory

21:13:50 #2 Text 0 File Reader.cpp, Line 124
Reader running

21:13:50 #3 Text 0 File Writer.cpp, Line 113
Writer G: PIONEER DVD-RW DVR-109 running

21:13:50 #4 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media

21:13:50 #5 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2255776 (501:17.01, 4405MB)

21:13:50 #6 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)

21:13:50 #7 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: PIONEER DVD-RW DVR-109, Media type: DVD-R
Disc Manufacturer: TYG03 -
Disc Application Code: 64, Disc Physical Code: 193

21:13:50 #8 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================

21:13:50 #9 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2255777 (2255777) = #2255777/501:17.2
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2255777 blocks [G: PIONEER DVD-RW DVR-109]
--------------------------------------------------------------

21:13:50 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [G: PIONEER DVD-RW DVR-109] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4619831296, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2255777 | lead-out | 1 | 0x41 | 0x00

21:13:50 #11 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

21:13:50 #12 Phase 24 File dlgbrnst.cpp, Line 1724
Caching of files started

21:13:50 #13 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.

21:13:50 #14 Phase 25 File dlgbrnst.cpp, Line 1724
Caching of files completed

21:13:50 #15 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 12x (16,620 KB/s)

21:13:52 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

21:13:52 #17 Text 0 File DVDR.cpp, Line 2469
Recording mode: Sequential Recording Mode for Multisession

21:13:52 #18 Text 0 File MMC.cpp, Line 21541
Set BUFE: Buffer underrun protection -> ON

21:13:52 #19 Text 0 File DVDR.cpp, Line 2624
Start write address at LBA 0
DVD high compatibility mode: Yes

21:13:52 #20 Text 0 File Cdrdrv.cpp, Line 8385
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

21:14:03 #21 Text 0 File Cdrdrv.cpp, Line 1195
21:14:03.687 - G: PIONEER DVD-RW DVR-109 : Queue again later

21:15:44 #22 SPTI -1061 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1061)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x44
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 03 00 00 00 20 00 00 00
Sense Area: 0x71 00 04 00 02 13 16 0E 00 00 00 00 44
Buffer x05190000: Len x10000
0x00 00 01 BA 44 00 0F 8A 94 AD 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 C4 06 AB B6 11 24 DE 17 06
0x6C 81 A7 D8 5E 59 C9 85 24 62 24 12 92 5B 7E D0

21:15:44 #23 CDR -1061 File Writer.cpp, Line 302
Internal target failure
G: PIONEER DVD-RW DVR-109

21:15:44 #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

21:15:45 #25 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

21:15:45 #26 Text 0 File DVDR.cpp, Line 2866
EndDAO: Last written address was 767

21:15:45 #27 Phase 133 File dlgbrnst.cpp, Line 1724
Writing short lead-out

21:15:45 #28 SPTI -1176 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x5B 01 02 00 00 03 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 72 04

21:15:45 #29 CDR -1176 File WriterStatus.cpp, Line 167
Session fixation error
G: PIONEER DVD-RW DVR-109

21:15:45 #30 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

21:15:45 #31 Phase 38 File dlgbrnst.cpp, Line 1724
Burn process failed at 12x (16,620 KB/s)

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 13:06:00
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 20/01/2006 23:46:33 (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 04/08/2004 04:59:42 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

*_chef_* · 10-05-2006

Nero 7.0 > update immediately.

Also, your drives are on nvidia ide drivers - gives issues.

downloader · 10-05-2006

I have put on the windows ide drivers....so i now see primary/secondary channels on the device manager properties....still if i uninstall everything it wont come on....how do i rid the nvidia drivers dcompletely and do i need to do it also for my sata hdd's ??

**geno888** · 10-05-2006

You don't need to get rid of ALL nvidia drivers, but only IDE ones.

If I'm not wrong, for s-ata HDD controllers DMA is not changeable

downloader · 10-05-2006

I didnt think so....i am using the dual channell ide drivers provided by windows now and i still cant burn, dma is set to use if available.

**geno888** · 10-05-2006

Some mainboard require to enable DMA also in bios. Check it too

downloader · 11-05-2006

it is.

*_chef_* · 11-05-2006

"dma if available" is not important.

What is shown under that info??

downloader · 11-05-2006

ultra dma 4...this is whats baffling...windows reports it as on and on the correct setting

downloader · 11-05-2006

Ok updated to nero 7.0.3..somthing.b...anyway...its an update....i have got a disc burning now...but i hold no optimism as i have had this happen before...it will be about 20 burns and i will be back here again

*_chef_* · 11-05-2006

7.2.0.3 should be latest.

downloader · 11-05-2006

thats what i got.

downloader · 11-05-2006

just completed a 12x burn and has taken just over 10 minutes...under normal circumstances that should have been done in at least 7mins, i know its only 3 min difference but thats not the quibble....it will get progressively slower i assume and then i will not be able to burn again.

downloader · 11-05-2006

nope......i got 2 burns, and they take over 2 minutes to actually start.....now its just spinning up and down and hanging then it starts to burn a few minutes after the remaining time has elapsed.....soon i will be back at square one.....wtf is causing this ?? i dont really want to reformat my pc right now...what can i do to totally remedy this illogical problem ?

**geno888** · 11-05-2006

Burning don't start immediately. First the drive do some calibrations. In some drives these can require a full minute or more.

downloader · 11-05-2006

mine started within 45 seconds before i started getting these problems, a minute is not long to wait...but 5 minutes ?? no way, something wrong there.

**geno888** · 11-05-2006

Can you try this drive on a different computer? In this way it's possible to exclude a damaged drive.

downloader · 11-05-2006

i have three pioneer burners....they ALL do it, the older one i have disconnected....when one works they all work....just had another bummed out burn but the log this time shows dma is on....

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 13:06:00
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32

NT-SPTI used
Nero Version: 7.2.0.3
Internal Version: 7, 2, 0, 3

Recorder: Version: 1.58 - HA 1 TA 1 - 7.2.0.3
Adapter driver: HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: Version: 1.0 - HA 1 TA 3 - 7.2.0.3
Adapter driver: HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : PIONEER DVD-RW DVR-109 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-109 atapi Port 1 ID 0 DMA: On
DiskPeripheral : Maxtor 6L250S0 nvata Port 2 ID 0 DMA: Off
DiskPeripheral : Maxtor 6Y120M0 nvata Port 2 ID 2 DMA: Off
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 3 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 4 ID 0 DMA: Off

=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-109 G: CDRom1
PIONEER DVD-RW DVR-109 H: CDRom0
Generic DVD-ROM J: CDRom3
SCSIVAX DVD/CD-ROM N: CDRom2
=======================

AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 195MB (200216kB)
Memory in use : 61 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

11.5.2006
Burn DVD Image
18:56:22 #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory

18:56:22 #2 Text 0 File Reader.cpp, Line 124
Reader running

18:56:22 #3 Text 0 File Writer.cpp, Line 113
Writer G: PIONEER DVD-RW DVR-109 running

18:56:22 #4 Text 0 File Burncd.cpp, Line 3365
Turn on Disc-At-Once, using DVD media

18:56:57 #5 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2293483 (509:39.58, 4479MB)
... change CloseDisc-Flag to 1 as capacity is exhaused

18:56:57 #6 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)

18:56:57 #7 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: PIONEER DVD-RW DVR-109, Media type: DVD-R
Disc Manufacturer: TYG03 -
Disc Application Code: 64, Disc Physical Code: 193

18:56:57 #8 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD R DL.)

18:56:57 #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2293484 (2293484) = #2293484/509:39.59
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2293484 blocks [G: PIONEER DVD-RW DVR-109]
--------------------------------------------------------------

18:56:57 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [G: PIONEER DVD-RW DVR-109] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4697055232, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2293484 | lead-out | 1 | 0x41 | 0x00

18:56:57 #11 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

18:56:57 #12 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

18:56:57 #13 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started

18:56:57 #14 Text 0 File Burncd.cpp, Line 4199
Cache writing successful.

18:56:57 #15 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed

18:56:57 #16 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 16x (22,160 KB/s)

18:56:57 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

18:56:57 #18 Text 0 File DVDR.cpp, Line 2786
Recording mode: Sequential Recording Mode

18:56:57 #19 Text 0 File DVDR.cpp, Line 2942
Start write address at LBA 0
DVD high compatibility mode: Yes

18:56:58 #20 Text 0 File Cdrdrv.cpp, Line 8914
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

18:57:08 #21 Text 0 File Cdrdrv.cpp, Line 1214
18:57:08.640 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:00:38 #22 SPTI -1061 File SCSIPassThrough.cpp, Line 290
G: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1061)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x44
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 03 00 00 00 20 00 00 00
Sense Area: 0x71 00 04 00 02 01 16 0E 00 00 00 00 44
Buffer x05130000: Len x10000
0x00 00 01 BA 44 00 0C A1 25 F3 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

19:00:38 #23 CDR -1061 File Writer.cpp, Line 302
Internal target failure
G: PIONEER DVD-RW DVR-109

19:00:39 #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

19:00:40 #25 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

19:00:40 #26 Text 0 File DVDR.cpp, Line 3182
EndDAO: Last written address was 767

19:00:40 #27 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 16x (22,160 KB/s)

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 13:06:00
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 20/01/2006 23:46:33 (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 04/08/2004 04:59:42 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

downloader · 11-05-2006

i had enough of this bollox.....just taken 7 minutes to actually start burning a disc now...

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 13:06:00
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32

NT-SPTI used
Nero Version: 7.2.0.3
Internal Version: 7, 2, 0, 3

Recorder: Version: 1.58 - HA 2 TA 1 - 7.2.0.3
Adapter driver: HA 2
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: Version: 1.0 - HA 1 TA 3 - 7.2.0.3
Adapter driver: HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : PIONEER DVD-RW DVR-109 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-109 atapi Port 1 ID 0 DMA: On
DiskPeripheral : Maxtor 6L250S0 nvata Port 2 ID 0 DMA: Off
DiskPeripheral : Maxtor 6Y120M0 nvata Port 2 ID 2 DMA: Off
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 3 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 4 ID 0 DMA: Off

=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-109 G: CDRom9
PIONEER DVD-RW DVR-109 H: CDRom8
Generic DVD-ROM J: CDRom3
SCSIVAX DVD/CD-ROM N: CDRom2
=======================

AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 99MB (101392kB)
Memory in use : 80 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

11.5.2006
Burn DVD Image
19:23:21 #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory

19:23:21 #2 Text 0 File Reader.cpp, Line 124
Reader running

19:23:21 #3 Text 0 File Writer.cpp, Line 113
Writer G: PIONEER DVD-RW DVR-109 running

19:23:21 #4 Text 0 File Burncd.cpp, Line 3365
Turn on Disc-At-Once, using DVD media

19:23:21 #5 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2293483 (509:39.58, 4479MB)
... change CloseDisc-Flag to 1 as capacity is exhaused

19:23:21 #6 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)

19:23:21 #7 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: PIONEER DVD-RW DVR-109, Media type: DVD-R
Disc Manufacturer: TYG03 -
Disc Application Code: 64, Disc Physical Code: 193

19:23:21 #8 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================

19:23:21 #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2293484 (2293484) = #2293484/509:39.59
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2293484 blocks [G: PIONEER DVD-RW DVR-109]
--------------------------------------------------------------

19:23:21 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [G: PIONEER DVD-RW DVR-109] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4697055232, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2293484 | lead-out | 1 | 0x41 | 0x00

19:23:21 #11 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

19:23:21 #12 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

19:23:21 #13 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started

19:23:21 #14 Text 0 File Burncd.cpp, Line 4199
Cache writing successful.

19:23:21 #15 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed

19:23:21 #16 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 16x (22,160 KB/s)

19:23:21 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

19:23:21 #18 Text 0 File DVDR.cpp, Line 2786
Recording mode: Sequential Recording Mode

19:23:21 #19 Text 0 File DVDR.cpp, Line 2942
Start write address at LBA 0
DVD high compatibility mode: Yes

19:23:21 #20 Text 0 File Cdrdrv.cpp, Line 8914
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

19:23:33 #21 Text 0 File Cdrdrv.cpp, Line 1214
19:23:33.015 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:08 #22 Text 0 File Cdrdrv.cpp, Line 1214
19:30:08.531 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:09 #23 Text 0 File Cdrdrv.cpp, Line 1214
19:30:09.390 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:09 #24 Text 0 File Cdrdrv.cpp, Line 1214
19:30:09.546 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:09 #25 Text 0 File Cdrdrv.cpp, Line 1214
19:30:09.562 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:09 #26 Text 0 File Cdrdrv.cpp, Line 1214
19:30:09.609 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:09 #27 Text 0 File Cdrdrv.cpp, Line 1214
19:30:09.625 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:09 #28 Text 0 File Cdrdrv.cpp, Line 1214
19:30:09.640 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:09 #29 Text 0 File Cdrdrv.cpp, Line 1214
19:30:09.656 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:09 #30 Text 0 File Cdrdrv.cpp, Line 1214
19:30:09.703 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:09 #31 Text 0 File Cdrdrv.cpp, Line 1214
19:30:09.718 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:09 #32 Text 0 File Cdrdrv.cpp, Line 1214
19:30:09.734 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:09 #33 Text 0 File Cdrdrv.cpp, Line 1214
19:30:09.781 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:09 #34 Text 0 File Cdrdrv.cpp, Line 1214
19:30:09.796 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:09 #35 Text 0 File Cdrdrv.cpp, Line 1214
19:30:09.812 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:09 #36 Text 0 File Cdrdrv.cpp, Line 1214
19:30:09.843 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:09 #37 Text 0 File Cdrdrv.cpp, Line 1214
19:30:09.859 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:09 #38 Text 0 File Cdrdrv.cpp, Line 1214
19:30:09.875 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:09 #39 Text 0 File Cdrdrv.cpp, Line 1214
19:30:09.890 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:09 #40 Text 0 File Cdrdrv.cpp, Line 1214
19:30:09.921 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:09 #41 Text 0 File Cdrdrv.cpp, Line 1214
19:30:09.937 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:09 #42 Text 0 File Cdrdrv.cpp, Line 1214
19:30:09.953 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:09 #43 Text 0 File Cdrdrv.cpp, Line 1214
19:30:09.968 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:10 #44 Text 0 File Cdrdrv.cpp, Line 1214
19:30:10.000 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:10 #45 Text 0 File Cdrdrv.cpp, Line 1214
19:30:10.015 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:10 #46 Text 0 File Cdrdrv.cpp, Line 1214
19:30:10.031 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:10 #47 Text 0 File Cdrdrv.cpp, Line 1214
19:30:10.046 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:10 #48 Text 0 File Cdrdrv.cpp, Line 1214
19:30:10.078 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:10 #49 Text 0 File Cdrdrv.cpp, Line 1214
19:30:10.093 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:10 #50 Text 0 File Cdrdrv.cpp, Line 1214
19:30:10.125 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:10 #51 Text 0 File Cdrdrv.cpp, Line 1214
19:30:10.156 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:10 #52 Text 0 File Cdrdrv.cpp, Line 1214
19:30:10.171 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:10 #53 Text 0 File Cdrdrv.cpp, Line 1214
19:30:10.187 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:10 #54 Text 0 File Cdrdrv.cpp, Line 1214
19:30:10.203 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:10 #55 Text 0 File Cdrdrv.cpp, Line 1214
19:30:10.234 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:10 #56 Text 0 File Cdrdrv.cpp, Line 1214
19:30:10.250 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:10 #57 Text 0 File Cdrdrv.cpp, Line 1214
19:30:10.265 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:10 #58 Text 0 File Cdrdrv.cpp, Line 1214
19:30:10.281 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:10 #59 Text 0 File Cdrdrv.cpp, Line 1214
19:30:10.328 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:10 #60 Text 0 File Cdrdrv.cpp, Line 1214
19:30:10.343 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:10 #61 Text 0 File Cdrdrv.cpp, Line 1214
19:30:10.359 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:10 #62 Text 0 File Cdrdrv.cpp, Line 1214
19:30:10.390 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:10 #63 Text 0 File Cdrdrv.cpp, Line 1214
19:30:10.406 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:10 #64 Text 0 File Cdrdrv.cpp, Line 1214
19:30:10.421 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:10 #65 Text 0 File Cdrdrv.cpp, Line 1214
19:30:10.437 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:10 #66 Text 0 File Cdrdrv.cpp, Line 1214
19:30:10.484 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:10 #67 Text 0 File Cdrdrv.cpp, Line 1214
19:30:10.500 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:10 #68 Text 0 File Cdrdrv.cpp, Line 1214
19:30:10.515 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:10 #69 Text 0 File Cdrdrv.cpp, Line 1214
19:30:10.640 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:10 #70 Text 0 File Cdrdrv.cpp, Line 1214
19:30:10.656 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:10 #71 Text 0 File Cdrdrv.cpp, Line 1214
19:30:10.703 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:10 #72 Text 0 File Cdrdrv.cpp, Line 1214
19:30:10.718 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:10 #73 Text 0 File Cdrdrv.cpp, Line 1214
19:30:10.734 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:10 #74 Text 0 File Cdrdrv.cpp, Line 1214
19:30:10.750 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:10 #75 Text 0 File Cdrdrv.cpp, Line 1214
19:30:10.781 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:10 #76 Text 0 File Cdrdrv.cpp, Line 1214
19:30:10.796 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:10 #77 Text 0 File Cdrdrv.cpp, Line 1214
19:30:10.828 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:10 #78 Text 0 File Cdrdrv.cpp, Line 1214
19:30:10.859 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:10 #79 Text 0 File Cdrdrv.cpp, Line 1214
19:30:10.875 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:10 #80 Text 0 File Cdrdrv.cpp, Line 1214
19:30:10.890 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:10 #81 Text 0 File Cdrdrv.cpp, Line 1214
19:30:10.906 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:10 #82 Text 0 File Cdrdrv.cpp, Line 1214
19:30:10.953 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:10 #83 Text 0 File Cdrdrv.cpp, Line 1214
19:30:10.968 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:10 #84 Text 0 File Cdrdrv.cpp, Line 1214
19:30:10.984 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:11 #85 Text 0 File Cdrdrv.cpp, Line 1214
19:30:11.015 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:11 #86 Text 0 File Cdrdrv.cpp, Line 1214
19:30:11.031 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:11 #87 Text 0 File Cdrdrv.cpp, Line 1214
19:30:11.046 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:11 #88 Text 0 File Cdrdrv.cpp, Line 1214
19:30:11.062 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:11 #89 Text 0 File Cdrdrv.cpp, Line 1214
19:30:11.093 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:11 #90 Text 0 File Cdrdrv.cpp, Line 1214
19:30:11.109 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:11 #91 Text 0 File Cdrdrv.cpp, Line 1214
19:30:11.125 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:11 #92 Text 0 File Cdrdrv.cpp, Line 1214
19:30:11.140 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:11 #93 Text 0 File Cdrdrv.cpp, Line 1214
19:30:11.203 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:11 #94 Text 0 File Cdrdrv.cpp, Line 1214
19:30:11.218 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:11 #95 Text 0 File Cdrdrv.cpp, Line 1214
19:30:11.281 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:11 #96 Text 0 File Cdrdrv.cpp, Line 1214
19:30:11.296 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:11 #97 Text 0 File Cdrdrv.cpp, Line 1214
19:30:11.312 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:11 #98 Text 0 File Cdrdrv.cpp, Line 1214
19:30:11.328 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:11 #99 Text 0 File Cdrdrv.cpp, Line 1214
19:30:11.375 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:11 #100 Text 0 File Cdrdrv.cpp, Line 1214
19:30:11.390 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:11 #101 Text 0 File Cdrdrv.cpp, Line 1214
19:30:11.406 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:11 #102 Text 0 File Cdrdrv.cpp, Line 1214
19:30:11.437 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:11 #103 Text 0 File Cdrdrv.cpp, Line 1214
19:30:11.453 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:11 #104 Text 0 File Cdrdrv.cpp, Line 1214
19:30:11.468 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:11 #105 Text 0 File Cdrdrv.cpp, Line 1214
19:30:11.484 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:11 #106 Text 0 File Cdrdrv.cpp, Line 1214
19:30:11.515 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:11 #107 Text 0 File Cdrdrv.cpp, Line 1214
19:30:11.531 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:11 #108 Text 0 File Cdrdrv.cpp, Line 1214
19:30:11.546 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:11 #109 Text 0 File Cdrdrv.cpp, Line 1214
19:30:11.765 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:12 #110 Text 0 File Cdrdrv.cpp, Line 1214
19:30:12.734 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:12 #111 Text 0 File Cdrdrv.cpp, Line 1214
19:30:12.750 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:12 #112 Text 0 File Cdrdrv.cpp, Line 1214
19:30:12.765 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:12 #113 Text 0 File Cdrdrv.cpp, Line 1214
19:30:12.781 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:12 #114 Text 0 File Cdrdrv.cpp, Line 1214
19:30:12.812 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:12 #115 Text 0 File Cdrdrv.cpp, Line 1214
19:30:12.828 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:12 #116 Text 0 File Cdrdrv.cpp, Line 1214
19:30:12.843 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:12 #117 Text 0 File Cdrdrv.cpp, Line 1214
19:30:12.859 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:12 #118 Text 0 File Cdrdrv.cpp, Line 1214
19:30:12.890 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:12 #119 Text 0 File Cdrdrv.cpp, Line 1214
19:30:12.906 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:30:12 #120 Text 0 File Cdrdrv.cpp, Line 1214
19:30:12.937 - G: PIONEER DVD-RW DVR-109 : Queue again later

19:38:02 #121 Text 0 File WriterStatus.cpp, Line 116
start writing Lead-Out at LBA 2293484 (22FEECh), length 0 blocks

19:38:02 #122 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

19:38:02 #123 Text 0 File DVDR.cpp, Line 3182
EndDAO: Last written address was 2293471

19:38:12 #124 Phase 37 File dlgbrnst.cpp, Line 1730
Burn process completed successfully at 16x (22,160 KB/s)

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 13:06:00
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 20/01/2006 23:46:33 (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 04/08/2004 04:59:42 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

**geno888** · 11-05-2006

Have you checked cables?

Pioneer need a 80 wire cable to work correctly. If I'm not wrong these are UDMA-4 drives

*_chef_* · 12-05-2006

Not only this, I already told you that you are using NVIDIA IDE drivers and there come your issues from!!

Also, use better media and leave such crap as Alcohol off the system.

downloader · 13-05-2006

using tayo yuden and ritek g05 only.....never had any problems before with having other engines installed, nonetheless, another thing i can eliminate from the cause. How do i totally strip out the nvidia drivers, for the optical drives anyway i thought i had, i did not touch the sata nvidia drivers though. I am also using 80 wire connecters.

*weedougie* · 13-05-2006

=== Scsi-Device-Map ===
CdRomPeripheral : PIONEER DVD-RW DVR-109 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-109 atapi Port 1 ID 0 DMA: On
DiskPeripheral : Maxtor 6L250S0 nvata Port 2 ID 0 DMA: Off
DiskPeripheral : Maxtor 6Y120M0 nvata Port 2 ID 2 DMA: Off
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 3 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 4 ID 0 DMA: Off

From your log above your hard drives are probably in PIO mode, a condition that MS windows drops into when it has issues?
You will have to get these into DMA mode as well.

**geno888** · 13-05-2006

To uninstall IDE drivers, go to device manager, expand the item IDE ATA/ATAPI and double click on primary and secondary IDE channel. You should have a window similar to the one I posted for each IDE channel.

Select the "driver" tab and then "uninstall" button.

This should force windows to request a reset, but wait a little; before you need to uninstall drivers both in primary and secondary channel; then do the reset and windows reintall standard IDE drivers.

As safe measure, create first a system restore point or do a backup of important data on your C: drive

10-05-2006	#1 (permalink)
downloader CD Freaks Rookie Join Date: May 2005 Posts: 38	Cant turn on dma.. I have read various threads and suggestions, i have managed to get it going a few times by setting to pio mode then restarting then reinstating dma and restarting and uninstalling drives....now i cant turn it on at all....nero reports dma off for ALL drives, windows says they are using ultra dma 4....here is my nero log.... Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 13:06:00 ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32 NT-SPTI used Nero Version: 7.0.0.0 Recorder: Version: 1.58 - HA 1 TA 0 - 7.0.0.0 Adapter driver: HA 1 Drive buffer : 2000kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: Version: 1.0 - HA 1 TA 3 - 7.0.0.0 Adapter driver: HA 1 === Scsi-Device-Map === CdRomPeripheral : PIONEER DVD-RW DVR-109 nvata Port 0 ID 0 DMA: Off CdRomPeripheral : PIONEER DVD-RW DVR-109 nvata Port 0 ID 2 DMA: Off DiskPeripheral : Maxtor 6L250S0 nvata Port 1 ID 0 DMA: Off DiskPeripheral : Maxtor 6Y120M0 nvata Port 1 ID 2 DMA: Off CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 2 ID 0 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off === CDRom-Device-Map === PIONEER DVD-RW DVR-109 G: CDRom0 PIONEER DVD-RW DVR-109 I: CDRom1 Generic DVD-ROM J: CDRom3 SCSIVAX DVD/CD-ROM N: CDRom2 ======================= AutoRun : 0 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 47MB (48944kB) Memory in use : 90 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 10.5.2006 Burn DVD Image 21:13:50 #1 Text 0 File ThreadedTransfer.cpp, Line 525 ReadBuffer-Pipe got 262144KB of Memory 21:13:50 #2 Text 0 File Reader.cpp, Line 124 Reader running 21:13:50 #3 Text 0 File Writer.cpp, Line 113 Writer G: PIONEER DVD-RW DVR-109 running 21:13:50 #4 Text 0 File Burncd.cpp, Line 3301 Turn on Disc-At-Once, using DVD media 21:13:50 #5 Text 0 File DlgWaitCD.cpp, Line 277 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2255776 (501:17.01, 4405MB) 21:13:50 #6 Text 0 File DlgWaitCD.cpp, Line 289 Write in overburning mode: NO (enabled: CD) 21:13:50 #7 Text 0 File DlgWaitCD.cpp, Line 2568 Recorder: PIONEER DVD-RW DVR-109, Media type: DVD-R Disc Manufacturer: TYG03 - Disc Application Code: 64, Disc Physical Code: 193 21:13:50 #8 Text 0 File DlgWaitCD.cpp, Line 456 >>> Protocol of DlgWaitCD activities: <<< ========================================= 21:13:50 #9 Text 0 File ThreadedTransferInterface.cpp, Line 846 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 2255777 (2255777) = #2255777/501:17.2 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2255777 blocks [G: PIONEER DVD-RW DVR-109] -------------------------------------------------------------- 21:13:50 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1058 Prepare recorder [G: PIONEER DVD-RW DVR-109] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4619831296, ISRC "" DAO layout: =========== __Start_\|____Track_\|_Idx_\|_CtrlAdr_\|_RecDep__________ 0 \| lead-in \| 0 \| 0x41 \| 0x00 0 \| 1 \| 0 \| 0x41 \| 0x00 0 \| 1 \| 1 \| 0x41 \| 0x00 2255777 \| lead-out \| 1 \| 0x41 \| 0x00 21:13:50 #11 Text 0 File SCSIPassThrough.cpp, Line 34 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 21:13:50 #12 Phase 24 File dlgbrnst.cpp, Line 1724 Caching of files started 21:13:50 #13 Text 0 File Burncd.cpp, Line 4129 Cache writing successful. 21:13:50 #14 Phase 25 File dlgbrnst.cpp, Line 1724 Caching of files completed 21:13:50 #15 Phase 36 File dlgbrnst.cpp, Line 1724 Burn process started at 12x (16,620 KB/s) 21:13:52 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2669 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 21:13:52 #17 Text 0 File DVDR.cpp, Line 2469 Recording mode: Sequential Recording Mode for Multisession 21:13:52 #18 Text 0 File MMC.cpp, Line 21541 Set BUFE: Buffer underrun protection -> ON 21:13:52 #19 Text 0 File DVDR.cpp, Line 2624 Start write address at LBA 0 DVD high compatibility mode: Yes 21:13:52 #20 Text 0 File Cdrdrv.cpp, Line 8385 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 21:14:03 #21 Text 0 File Cdrdrv.cpp, Line 1195 21:14:03.687 - G: PIONEER DVD-RW DVR-109 : Queue again later 21:15:44 #22 SPTI -1061 File SCSIPassThrough.cpp, Line 306 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1061) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x44 Sense Qual: 0x00 CDB Data: 0x2A 00 00 00 03 00 00 00 20 00 00 00 Sense Area: 0x71 00 04 00 02 13 16 0E 00 00 00 00 44 Buffer x05190000: Len x10000 0x00 00 01 BA 44 00 0F 8A 94 AD 01 89 C3 F8 00 00 0x01 E0 07 EC 81 00 00 C4 06 AB B6 11 24 DE 17 06 0x6C 81 A7 D8 5E 59 C9 85 24 62 24 12 92 5B 7E D0 21:15:44 #23 CDR -1061 File Writer.cpp, Line 302 Internal target failure G: PIONEER DVD-RW DVR-109 21:15:44 #24 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 21:15:45 #25 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 21:15:45 #26 Text 0 File DVDR.cpp, Line 2866 EndDAO: Last written address was 767 21:15:45 #27 Phase 133 File dlgbrnst.cpp, Line 1724 Writing short lead-out 21:15:45 #28 SPTI -1176 File SCSIPassThrough.cpp, Line 306 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x04 CDB Data: 0x5B 01 02 00 00 03 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 72 04 21:15:45 #29 CDR -1176 File WriterStatus.cpp, Line 167 Session fixation error G: PIONEER DVD-RW DVR-109 21:15:45 #30 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 21:15:45 #31 Phase 38 File dlgbrnst.cpp, Line 1724 Burn process failed at 12x (16,620 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 13:06:00 File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 20/01/2006 23:46:33 (Prassi/Veritas driver for win 2K) File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 04/08/2004 04:59:42 (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

10-05-2006	#2 (permalink)
_chef_ CDFreaks Resident Join Date: Aug 2004 Location: @FX labs .de ...watching [Bender's.Game] [Tripping.The.Rift.The.Movie] Posts: 24,305	Re: Cant turn on dma.. Nero 7.0 > update immediately. Also, your drives are on nvidia ide drivers - gives issues. __________________ Started with burning capable optical drives (CD-R) in 1997. Bought optical drives from AOpen, HP, LiteOn, NEC, Philips, Pioneer, Plextor, Ricoh, Samsung, Sanyo, Toshiba and Yamaha. *'Things are now in motion that cannot be undone.' [Gandalf, LoTR]* Enable DMA with micrAp$0ft Enable DMA free at your will busTRACE => Upper/Lower Filters Util DevCon *HOW TO ... Delete the Upper & Lower Filters!* If you expect help then please start by using the powerful SEARCH.

10-05-2006	#3 (permalink)
downloader CD Freaks Rookie Join Date: May 2005 Posts: 38	Re: Cant turn on dma.. I have put on the windows ide drivers....so i now see primary/secondary channels on the device manager properties....still if i uninstall everything it wont come on....how do i rid the nvidia drivers dcompletely and do i need to do it also for my sata hdd's ??

10-05-2006	#4 (permalink)
geno888 Moderator, Editor & CD Freaks Guru Join Date: Jun 2005 Location: Italy Posts: 18,059	Re: Cant turn on dma.. You don't need to get rid of ALL nvidia drivers, but only IDE ones. If I'm not wrong, for s-ata HDD controllers DMA is not changeable

10-05-2006	#5 (permalink)
downloader CD Freaks Rookie Join Date: May 2005 Posts: 38	Re: Cant turn on dma.. I didnt think so....i am using the dual channell ide drivers provided by windows now and i still cant burn, dma is set to use if available.

Today
CD Freaks	__________________ This advertising will not be shown to registered members. Register your free account today and become a member on Club CD Freaks - Knowledge is Power

10-05-2006	#6 (permalink)
geno888 Moderator, Editor & CD Freaks Guru Join Date: Jun 2005 Location: Italy Posts: 18,059	Re: Cant turn on dma.. Some mainboard require to enable DMA also in bios. Check it too

11-05-2006	#7 (permalink)
downloader CD Freaks Rookie Join Date: May 2005 Posts: 38	Re: Cant turn on dma.. it is.

11-05-2006	#8 (permalink)
_chef_ CDFreaks Resident Join Date: Aug 2004 Location: @FX labs .de ...watching [Bender's.Game] [Tripping.The.Rift.The.Movie] Posts: 24,305	Re: Cant turn on dma.. "dma if available" is not important. What is shown under that info?? __________________ Started with burning capable optical drives (CD-R) in 1997. Bought optical drives from AOpen, HP, LiteOn, NEC, Philips, Pioneer, Plextor, Ricoh, Samsung, Sanyo, Toshiba and Yamaha. *'Things are now in motion that cannot be undone.' [Gandalf, LoTR]* Enable DMA with micrAp$0ft Enable DMA free at your will busTRACE => Upper/Lower Filters Util DevCon *HOW TO ... Delete the Upper & Lower Filters!* If you expect help then please start by using the powerful SEARCH.

11-05-2006	#9 (permalink)
downloader CD Freaks Rookie Join Date: May 2005 Posts: 38	Re: Cant turn on dma.. ultra dma 4...this is whats baffling...windows reports it as on and on the correct setting

11-05-2006	#10 (permalink)
downloader CD Freaks Rookie Join Date: May 2005 Posts: 38	Re: Cant turn on dma.. Ok updated to nero 7.0.3..somthing.b...anyway...its an update....i have got a disc burning now...but i hold no optimism as i have had this happen before...it will be about 20 burns and i will be back here again

11-05-2006	#11 (permalink)
_chef_ CDFreaks Resident Join Date: Aug 2004 Location: @FX labs .de ...watching [Bender's.Game] [Tripping.The.Rift.The.Movie] Posts: 24,305	Re: Cant turn on dma.. 7.2.0.3 should be latest. __________________ Started with burning capable optical drives (CD-R) in 1997. Bought optical drives from AOpen, HP, LiteOn, NEC, Philips, Pioneer, Plextor, Ricoh, Samsung, Sanyo, Toshiba and Yamaha. *'Things are now in motion that cannot be undone.' [Gandalf, LoTR]* Enable DMA with micrAp$0ft Enable DMA free at your will busTRACE => Upper/Lower Filters Util DevCon *HOW TO ... Delete the Upper & Lower Filters!* If you expect help then please start by using the powerful SEARCH.

11-05-2006	#12 (permalink)
downloader CD Freaks Rookie Join Date: May 2005 Posts: 38	Re: Cant turn on dma.. thats what i got.

11-05-2006	#13 (permalink)
downloader CD Freaks Rookie Join Date: May 2005 Posts: 38	Re: Cant turn on dma.. just completed a 12x burn and has taken just over 10 minutes...under normal circumstances that should have been done in at least 7mins, i know its only 3 min difference but thats not the quibble....it will get progressively slower i assume and then i will not be able to burn again.

11-05-2006	#14 (permalink)
downloader CD Freaks Rookie Join Date: May 2005 Posts: 38	Re: Cant turn on dma.. nope......i got 2 burns, and they take over 2 minutes to actually start.....now its just spinning up and down and hanging then it starts to burn a few minutes after the remaining time has elapsed.....soon i will be back at square one.....wtf is causing this ?? i dont really want to reformat my pc right now...what can i do to totally remedy this illogical problem ?

Commercial ads

11-05-2006	#15 (permalink)
geno888 Moderator, Editor & CD Freaks Guru Join Date: Jun 2005 Location: Italy Posts: 18,059	Re: Cant turn on dma.. Burning don't start immediately. First the drive do some calibrations. In some drives these can require a full minute or more.

11-05-2006	#16 (permalink)
downloader CD Freaks Rookie Join Date: May 2005 Posts: 38	Re: Cant turn on dma.. mine started within 45 seconds before i started getting these problems, a minute is not long to wait...but 5 minutes ?? no way, something wrong there.

11-05-2006	#17 (permalink)
geno888 Moderator, Editor & CD Freaks Guru Join Date: Jun 2005 Location: Italy Posts: 18,059	Re: Cant turn on dma.. Can you try this drive on a different computer? In this way it's possible to exclude a damaged drive.

11-05-2006	#18 (permalink)
downloader CD Freaks Rookie Join Date: May 2005 Posts: 38	Re: Cant turn on dma.. i have three pioneer burners....they ALL do it, the older one i have disconnected....when one works they all work....just had another bummed out burn but the log this time shows dma is on.... Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 13:06:00 ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32 NT-SPTI used Nero Version: 7.2.0.3 Internal Version: 7, 2, 0, 3 Recorder: Version: 1.58 - HA 1 TA 1 - 7.2.0.3 Adapter driver: HA 1 Drive buffer : 2000kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: Version: 1.0 - HA 1 TA 3 - 7.2.0.3 Adapter driver: HA 1 === Scsi-Device-Map === CdRomPeripheral : PIONEER DVD-RW DVR-109 atapi Port 0 ID 0 DMA: On CdRomPeripheral : PIONEER DVD-RW DVR-109 atapi Port 1 ID 0 DMA: On DiskPeripheral : Maxtor 6L250S0 nvata Port 2 ID 0 DMA: Off DiskPeripheral : Maxtor 6Y120M0 nvata Port 2 ID 2 DMA: Off CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 3 ID 0 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 4 ID 0 DMA: Off === CDRom-Device-Map === PIONEER DVD-RW DVR-109 G: CDRom1 PIONEER DVD-RW DVR-109 H: CDRom0 Generic DVD-ROM J: CDRom3 SCSIVAX DVD/CD-ROM N: CDRom2 ======================= AutoRun : 0 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 195MB (200216kB) Memory in use : 61 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 11.5.2006 Burn DVD Image 18:56:22 #1 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 262144KB of Memory 18:56:22 #2 Text 0 File Reader.cpp, Line 124 Reader running 18:56:22 #3 Text 0 File Writer.cpp, Line 113 Writer G: PIONEER DVD-RW DVR-109 running 18:56:22 #4 Text 0 File Burncd.cpp, Line 3365 Turn on Disc-At-Once, using DVD media 18:56:57 #5 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2293483 (509:39.58, 4479MB) ... change CloseDisc-Flag to 1 as capacity is exhaused 18:56:57 #6 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 18:56:57 #7 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: PIONEER DVD-RW DVR-109, Media type: DVD-R Disc Manufacturer: TYG03 - Disc Application Code: 64, Disc Physical Code: 193 18:56:57 #8 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD R DL.) 18:56:57 #9 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 2293484 (2293484) = #2293484/509:39.59 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2293484 blocks [G: PIONEER DVD-RW DVR-109] -------------------------------------------------------------- 18:56:57 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [G: PIONEER DVD-RW DVR-109] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4697055232, ISRC "" DAO layout: =========== __Start_\|____Track_\|_Idx_\|_CtrlAdr_\|_RecDep__________ 0 \| lead-in \| 0 \| 0x41 \| 0x00 0 \| 1 \| 0 \| 0x41 \| 0x00 0 \| 1 \| 1 \| 0x41 \| 0x00 2293484 \| lead-out \| 1 \| 0x41 \| 0x00 18:56:57 #11 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 18:56:57 #12 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 18:56:57 #13 Phase 24 File dlgbrnst.cpp, Line 1730 Caching of files started 18:56:57 #14 Text 0 File Burncd.cpp, Line 4199 Cache writing successful. 18:56:57 #15 Phase 25 File dlgbrnst.cpp, Line 1730 Caching of files completed 18:56:57 #16 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 16x (22,160 KB/s) 18:56:57 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 18:56:57 #18 Text 0 File DVDR.cpp, Line 2786 Recording mode: Sequential Recording Mode 18:56:57 #19 Text 0 File DVDR.cpp, Line 2942 Start write address at LBA 0 DVD high compatibility mode: Yes 18:56:58 #20 Text 0 File Cdrdrv.cpp, Line 8914 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 18:57:08 #21 Text 0 File Cdrdrv.cpp, Line 1214 18:57:08.640 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:00:38 #22 SPTI -1061 File SCSIPassThrough.cpp, Line 290 G: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1061) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x44 Sense Qual: 0x00 CDB Data: 0x2A 00 00 00 03 00 00 00 20 00 00 00 Sense Area: 0x71 00 04 00 02 01 16 0E 00 00 00 00 44 Buffer x05130000: Len x10000 0x00 00 01 BA 44 00 0C A1 25 F3 01 89 C3 F8 00 00 0x01 E0 07 EC 81 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 19:00:38 #23 CDR -1061 File Writer.cpp, Line 302 Internal target failure G: PIONEER DVD-RW DVR-109 19:00:39 #24 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 19:00:40 #25 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 19:00:40 #26 Text 0 File DVDR.cpp, Line 3182 EndDAO: Last written address was 767 19:00:40 #27 Phase 38 File dlgbrnst.cpp, Line 1730 Burn process failed at 16x (22,160 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 13:06:00 File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 20/01/2006 23:46:33 (Prassi/Veritas driver for win 2K) File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 04/08/2004 04:59:42 (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

11-05-2006	#19 (permalink)
downloader CD Freaks Rookie Join Date: May 2005 Posts: 38	Re: Cant turn on dma.. i had enough of this bollox.....just taken 7 minutes to actually start burning a disc now... Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 13:06:00 ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32 NT-SPTI used Nero Version: 7.2.0.3 Internal Version: 7, 2, 0, 3 Recorder: Version: 1.58 - HA 2 TA 1 - 7.2.0.3 Adapter driver: HA 2 Drive buffer : 2000kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: Version: 1.0 - HA 1 TA 3 - 7.2.0.3 Adapter driver: HA 1 === Scsi-Device-Map === CdRomPeripheral : PIONEER DVD-RW DVR-109 atapi Port 0 ID 0 DMA: On CdRomPeripheral : PIONEER DVD-RW DVR-109 atapi Port 1 ID 0 DMA: On DiskPeripheral : Maxtor 6L250S0 nvata Port 2 ID 0 DMA: Off DiskPeripheral : Maxtor 6Y120M0 nvata Port 2 ID 2 DMA: Off CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 3 ID 0 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 4 ID 0 DMA: Off === CDRom-Device-Map === PIONEER DVD-RW DVR-109 G: CDRom9 PIONEER DVD-RW DVR-109 H: CDRom8 Generic DVD-ROM J: CDRom3 SCSIVAX DVD/CD-ROM N: CDRom2 ======================= AutoRun : 0 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 99MB (101392kB) Memory in use : 80 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 11.5.2006 Burn DVD Image 19:23:21 #1 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 262144KB of Memory 19:23:21 #2 Text 0 File Reader.cpp, Line 124 Reader running 19:23:21 #3 Text 0 File Writer.cpp, Line 113 Writer G: PIONEER DVD-RW DVR-109 running 19:23:21 #4 Text 0 File Burncd.cpp, Line 3365 Turn on Disc-At-Once, using DVD media 19:23:21 #5 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2293483 (509:39.58, 4479MB) ... change CloseDisc-Flag to 1 as capacity is exhaused 19:23:21 #6 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 19:23:21 #7 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: PIONEER DVD-RW DVR-109, Media type: DVD-R Disc Manufacturer: TYG03 - Disc Application Code: 64, Disc Physical Code: 193 19:23:21 #8 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 19:23:21 #9 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 2293484 (2293484) = #2293484/509:39.59 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2293484 blocks [G: PIONEER DVD-RW DVR-109] -------------------------------------------------------------- 19:23:21 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [G: PIONEER DVD-RW DVR-109] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4697055232, ISRC "" DAO layout: =========== __Start_\|____Track_\|_Idx_\|_CtrlAdr_\|_RecDep__________ 0 \| lead-in \| 0 \| 0x41 \| 0x00 0 \| 1 \| 0 \| 0x41 \| 0x00 0 \| 1 \| 1 \| 0x41 \| 0x00 2293484 \| lead-out \| 1 \| 0x41 \| 0x00 19:23:21 #11 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 19:23:21 #12 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 19:23:21 #13 Phase 24 File dlgbrnst.cpp, Line 1730 Caching of files started 19:23:21 #14 Text 0 File Burncd.cpp, Line 4199 Cache writing successful. 19:23:21 #15 Phase 25 File dlgbrnst.cpp, Line 1730 Caching of files completed 19:23:21 #16 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 16x (22,160 KB/s) 19:23:21 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 19:23:21 #18 Text 0 File DVDR.cpp, Line 2786 Recording mode: Sequential Recording Mode 19:23:21 #19 Text 0 File DVDR.cpp, Line 2942 Start write address at LBA 0 DVD high compatibility mode: Yes 19:23:21 #20 Text 0 File Cdrdrv.cpp, Line 8914 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 19:23:33 #21 Text 0 File Cdrdrv.cpp, Line 1214 19:23:33.015 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:08 #22 Text 0 File Cdrdrv.cpp, Line 1214 19:30:08.531 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:09 #23 Text 0 File Cdrdrv.cpp, Line 1214 19:30:09.390 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:09 #24 Text 0 File Cdrdrv.cpp, Line 1214 19:30:09.546 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:09 #25 Text 0 File Cdrdrv.cpp, Line 1214 19:30:09.562 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:09 #26 Text 0 File Cdrdrv.cpp, Line 1214 19:30:09.609 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:09 #27 Text 0 File Cdrdrv.cpp, Line 1214 19:30:09.625 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:09 #28 Text 0 File Cdrdrv.cpp, Line 1214 19:30:09.640 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:09 #29 Text 0 File Cdrdrv.cpp, Line 1214 19:30:09.656 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:09 #30 Text 0 File Cdrdrv.cpp, Line 1214 19:30:09.703 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:09 #31 Text 0 File Cdrdrv.cpp, Line 1214 19:30:09.718 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:09 #32 Text 0 File Cdrdrv.cpp, Line 1214 19:30:09.734 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:09 #33 Text 0 File Cdrdrv.cpp, Line 1214 19:30:09.781 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:09 #34 Text 0 File Cdrdrv.cpp, Line 1214 19:30:09.796 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:09 #35 Text 0 File Cdrdrv.cpp, Line 1214 19:30:09.812 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:09 #36 Text 0 File Cdrdrv.cpp, Line 1214 19:30:09.843 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:09 #37 Text 0 File Cdrdrv.cpp, Line 1214 19:30:09.859 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:09 #38 Text 0 File Cdrdrv.cpp, Line 1214 19:30:09.875 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:09 #39 Text 0 File Cdrdrv.cpp, Line 1214 19:30:09.890 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:09 #40 Text 0 File Cdrdrv.cpp, Line 1214 19:30:09.921 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:09 #41 Text 0 File Cdrdrv.cpp, Line 1214 19:30:09.937 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:09 #42 Text 0 File Cdrdrv.cpp, Line 1214 19:30:09.953 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:09 #43 Text 0 File Cdrdrv.cpp, Line 1214 19:30:09.968 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:10 #44 Text 0 File Cdrdrv.cpp, Line 1214 19:30:10.000 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:10 #45 Text 0 File Cdrdrv.cpp, Line 1214 19:30:10.015 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:10 #46 Text 0 File Cdrdrv.cpp, Line 1214 19:30:10.031 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:10 #47 Text 0 File Cdrdrv.cpp, Line 1214 19:30:10.046 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:10 #48 Text 0 File Cdrdrv.cpp, Line 1214 19:30:10.078 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:10 #49 Text 0 File Cdrdrv.cpp, Line 1214 19:30:10.093 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:10 #50 Text 0 File Cdrdrv.cpp, Line 1214 19:30:10.125 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:10 #51 Text 0 File Cdrdrv.cpp, Line 1214 19:30:10.156 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:10 #52 Text 0 File Cdrdrv.cpp, Line 1214 19:30:10.171 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:10 #53 Text 0 File Cdrdrv.cpp, Line 1214 19:30:10.187 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:10 #54 Text 0 File Cdrdrv.cpp, Line 1214 19:30:10.203 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:10 #55 Text 0 File Cdrdrv.cpp, Line 1214 19:30:10.234 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:10 #56 Text 0 File Cdrdrv.cpp, Line 1214 19:30:10.250 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:10 #57 Text 0 File Cdrdrv.cpp, Line 1214 19:30:10.265 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:10 #58 Text 0 File Cdrdrv.cpp, Line 1214 19:30:10.281 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:10 #59 Text 0 File Cdrdrv.cpp, Line 1214 19:30:10.328 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:10 #60 Text 0 File Cdrdrv.cpp, Line 1214 19:30:10.343 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:10 #61 Text 0 File Cdrdrv.cpp, Line 1214 19:30:10.359 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:10 #62 Text 0 File Cdrdrv.cpp, Line 1214 19:30:10.390 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:10 #63 Text 0 File Cdrdrv.cpp, Line 1214 19:30:10.406 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:10 #64 Text 0 File Cdrdrv.cpp, Line 1214 19:30:10.421 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:10 #65 Text 0 File Cdrdrv.cpp, Line 1214 19:30:10.437 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:10 #66 Text 0 File Cdrdrv.cpp, Line 1214 19:30:10.484 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:10 #67 Text 0 File Cdrdrv.cpp, Line 1214 19:30:10.500 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:10 #68 Text 0 File Cdrdrv.cpp, Line 1214 19:30:10.515 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:10 #69 Text 0 File Cdrdrv.cpp, Line 1214 19:30:10.640 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:10 #70 Text 0 File Cdrdrv.cpp, Line 1214 19:30:10.656 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:10 #71 Text 0 File Cdrdrv.cpp, Line 1214 19:30:10.703 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:10 #72 Text 0 File Cdrdrv.cpp, Line 1214 19:30:10.718 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:10 #73 Text 0 File Cdrdrv.cpp, Line 1214 19:30:10.734 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:10 #74 Text 0 File Cdrdrv.cpp, Line 1214 19:30:10.750 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:10 #75 Text 0 File Cdrdrv.cpp, Line 1214 19:30:10.781 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:10 #76 Text 0 File Cdrdrv.cpp, Line 1214 19:30:10.796 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:10 #77 Text 0 File Cdrdrv.cpp, Line 1214 19:30:10.828 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:10 #78 Text 0 File Cdrdrv.cpp, Line 1214 19:30:10.859 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:10 #79 Text 0 File Cdrdrv.cpp, Line 1214 19:30:10.875 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:10 #80 Text 0 File Cdrdrv.cpp, Line 1214 19:30:10.890 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:10 #81 Text 0 File Cdrdrv.cpp, Line 1214 19:30:10.906 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:10 #82 Text 0 File Cdrdrv.cpp, Line 1214 19:30:10.953 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:10 #83 Text 0 File Cdrdrv.cpp, Line 1214 19:30:10.968 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:10 #84 Text 0 File Cdrdrv.cpp, Line 1214 19:30:10.984 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:11 #85 Text 0 File Cdrdrv.cpp, Line 1214 19:30:11.015 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:11 #86 Text 0 File Cdrdrv.cpp, Line 1214 19:30:11.031 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:11 #87 Text 0 File Cdrdrv.cpp, Line 1214 19:30:11.046 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:11 #88 Text 0 File Cdrdrv.cpp, Line 1214 19:30:11.062 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:11 #89 Text 0 File Cdrdrv.cpp, Line 1214 19:30:11.093 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:11 #90 Text 0 File Cdrdrv.cpp, Line 1214 19:30:11.109 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:11 #91 Text 0 File Cdrdrv.cpp, Line 1214 19:30:11.125 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:11 #92 Text 0 File Cdrdrv.cpp, Line 1214 19:30:11.140 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:11 #93 Text 0 File Cdrdrv.cpp, Line 1214 19:30:11.203 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:11 #94 Text 0 File Cdrdrv.cpp, Line 1214 19:30:11.218 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:11 #95 Text 0 File Cdrdrv.cpp, Line 1214 19:30:11.281 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:11 #96 Text 0 File Cdrdrv.cpp, Line 1214 19:30:11.296 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:11 #97 Text 0 File Cdrdrv.cpp, Line 1214 19:30:11.312 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:11 #98 Text 0 File Cdrdrv.cpp, Line 1214 19:30:11.328 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:11 #99 Text 0 File Cdrdrv.cpp, Line 1214 19:30:11.375 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:11 #100 Text 0 File Cdrdrv.cpp, Line 1214 19:30:11.390 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:11 #101 Text 0 File Cdrdrv.cpp, Line 1214 19:30:11.406 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:11 #102 Text 0 File Cdrdrv.cpp, Line 1214 19:30:11.437 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:11 #103 Text 0 File Cdrdrv.cpp, Line 1214 19:30:11.453 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:11 #104 Text 0 File Cdrdrv.cpp, Line 1214 19:30:11.468 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:11 #105 Text 0 File Cdrdrv.cpp, Line 1214 19:30:11.484 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:11 #106 Text 0 File Cdrdrv.cpp, Line 1214 19:30:11.515 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:11 #107 Text 0 File Cdrdrv.cpp, Line 1214 19:30:11.531 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:11 #108 Text 0 File Cdrdrv.cpp, Line 1214 19:30:11.546 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:11 #109 Text 0 File Cdrdrv.cpp, Line 1214 19:30:11.765 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:12 #110 Text 0 File Cdrdrv.cpp, Line 1214 19:30:12.734 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:12 #111 Text 0 File Cdrdrv.cpp, Line 1214 19:30:12.750 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:12 #112 Text 0 File Cdrdrv.cpp, Line 1214 19:30:12.765 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:12 #113 Text 0 File Cdrdrv.cpp, Line 1214 19:30:12.781 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:12 #114 Text 0 File Cdrdrv.cpp, Line 1214 19:30:12.812 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:12 #115 Text 0 File Cdrdrv.cpp, Line 1214 19:30:12.828 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:12 #116 Text 0 File Cdrdrv.cpp, Line 1214 19:30:12.843 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:12 #117 Text 0 File Cdrdrv.cpp, Line 1214 19:30:12.859 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:12 #118 Text 0 File Cdrdrv.cpp, Line 1214 19:30:12.890 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:12 #119 Text 0 File Cdrdrv.cpp, Line 1214 19:30:12.906 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:30:12 #120 Text 0 File Cdrdrv.cpp, Line 1214 19:30:12.937 - G: PIONEER DVD-RW DVR-109 : Queue again later 19:38:02 #121 Text 0 File WriterStatus.cpp, Line 116 start writing Lead-Out at LBA 2293484 (22FEECh), length 0 blocks 19:38:02 #122 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 19:38:02 #123 Text 0 File DVDR.cpp, Line 3182 EndDAO: Last written address was 2293471 19:38:12 #124 Phase 37 File dlgbrnst.cpp, Line 1730 Burn process completed successfully at 16x (22,160 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 13:06:00 File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 20/01/2006 23:46:33 (Prassi/Veritas driver for win 2K) File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 04/08/2004 04:59:42 (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

11-05-2006	#20 (permalink)
geno888 Moderator, Editor & CD Freaks Guru Join Date: Jun 2005 Location: Italy Posts: 18,059	Re: Cant turn on dma.. Have you checked cables? Pioneer need a 80 wire cable to work correctly. If I'm not wrong these are UDMA-4 drives

12-05-2006	#21 (permalink)
_chef_ CDFreaks Resident Join Date: Aug 2004 Location: @FX labs .de ...watching [Bender's.Game] [Tripping.The.Rift.The.Movie] Posts: 24,305	Re: Cant turn on dma.. Not only this, I already told you that you are using NVIDIA IDE drivers and there come your issues from!! Also, use better media and leave such crap as Alcohol off the system. __________________ Started with burning capable optical drives (CD-R) in 1997. Bought optical drives from AOpen, HP, LiteOn, NEC, Philips, Pioneer, Plextor, Ricoh, Samsung, Sanyo, Toshiba and Yamaha. *'Things are now in motion that cannot be undone.' [Gandalf, LoTR]* Enable DMA with micrAp$0ft Enable DMA free at your will busTRACE => Upper/Lower Filters Util DevCon *HOW TO ... Delete the Upper & Lower Filters!* If you expect help then please start by using the powerful SEARCH.

13-05-2006	#22 (permalink)
downloader CD Freaks Rookie Join Date: May 2005 Posts: 38	Re: Cant turn on dma.. using tayo yuden and ritek g05 only.....never had any problems before with having other engines installed, nonetheless, another thing i can eliminate from the cause. How do i totally strip out the nvidia drivers, for the optical drives anyway i thought i had, i did not touch the sata nvidia drivers though. I am also using 80 wire connecters.

13-05-2006	#23 (permalink)
weedougie CDFreaks Resident Join Date: Aug 2004 Location: England Posts: 1,083	Re: Cant turn on dma.. === Scsi-Device-Map === CdRomPeripheral : PIONEER DVD-RW DVR-109 atapi Port 0 ID 0 DMA: On CdRomPeripheral : PIONEER DVD-RW DVR-109 atapi Port 1 ID 0 DMA: On DiskPeripheral : Maxtor 6L250S0 nvata Port 2 ID 0 DMA: Off DiskPeripheral : Maxtor 6Y120M0 nvata Port 2 ID 2 DMA: Off CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 3 ID 0 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 4 ID 0 DMA: Off From your log above your hard drives are probably in PIO mode, a condition that MS windows drops into when it has issues? You will have to get these into DMA mode as well. __________________ People will often expend more time and energy avoiding work or the task before them than it would take to do it.

14-05-2006	#25 (permalink)
_chef_ CDFreaks Resident Join Date: Aug 2004 Location: @FX labs .de ...watching [Bender's.Game] [Tripping.The.Rift.The