This thread is about the NEC ND-1300A. Click here to see full specs

Ever since I've reinstalled Windows XP Professional (with SP3 bundled) I haven't been able to burn DVDs or CDs. However, I was using this exact Windows release prior to my reformat/clean install and had no burning issues whatsoever.

Note: My DVD-RW burner is a NEC ND-1300A. I've also upgraded to the latest 1.0C firmware. I've alternated burn media from Sony, Memorex and Maxell just to narrow the variables.

I've checked the settings under Device Manager for IDE ATA/ATAPI controllers, but I'm not sure about one of the settings. Device 0, under Primary IDE Channel, has Transfer Mode set to DMA if available and Current Transfer Mode displays Ultra DMA Mode 2. However, Device 1's Transer Mode is set to DMA if available, yet Current Transfer Mode is set as PIO Mode. Under Secondary IDE Channel, both Device 0 and Device 1 have Transfer Mode set as DMA if available and both devices' Current Transfer Mode is set to Ultra DMA Mode 2.

Could Device 1's Current Transfer Mode value be the culprit? If so, how do I change it? Below is a log from Nero 7 when a burn process failed:


Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.5.9.0
Internal Version: 7, 5, 9, 0
(Nero Express)
Recorder: <_NEC DVD_RW ND-1300A> Version: 1.0C - HA 1 TA 3 - 7.5.9.0
Adapter driver: HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: Version: 0015 - HA 1 TA 0 - 7.5.9.0
Adapter driver: HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800BB-75FJA1 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 2F040L0 atapi Port 0 ID 1 DMA: Off
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8162B E: CDRom0
_NEC DVD_RW ND-1300A F: CDRom3
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 765MB (784368kB)
Free physical memory: 318MB (326024kB)
Memory in use : 58 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

5.9.2008
ISO compilation
9:56:09 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

9:56:09 PM #2 Text 0 File Isodoc.cpp, Line 6509
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

9:56:10 PM #3 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)

9:56:10 PM #4 Text 0 File Burncd.cpp, Line 3451
Turn on Disc-At-Once, using DVD media

9:56:10 PM #5 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1846623 (410:21.48, 3606MB)

9:56:10 PM #6 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)

9:56:10 PM #7 Text 0 File DlgWaitCD.cpp, Line 2903
Recorder: _NEC DVD_RW ND-1300A, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193

9:56:10 PM #8 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================

9:56:10 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 821
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1846624 (1846624) = #1846624/410:21.49
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1846624 blocks [F: _NEC DVD_RW ND-1300A]
--------------------------------------------------------------

9:56:10 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1024
Prepare [F: _NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3781885952, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 1846624 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1846624 | 0 | 0x00
1846624 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

9:56:10 PM #11 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

9:56:10 PM #12 Phase 24 File dlgbrnst.cpp, Line 1746
Caching of files started

9:56:10 PM #13 Text 0 File Burncd.cpp, Line 4278
Cache writing successful.

9:56:10 PM #14 Phase 25 File dlgbrnst.cpp, Line 1746
Caching of files completed

9:56:10 PM #15 Phase 36 File dlgbrnst.cpp, Line 1746
Burn process started at 2.4x (3,324 KB/s)

9:56:10 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2743
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

9:56:10 PM #17 Text 0 File DVDR.cpp, Line 3058
Recording mode: Sequential Recording Mode for Multisession

9:56:10 PM #18 Text 0 File DVDR.cpp, Line 3214
Start write address at LBA 0
DVD high compatibility mode: Yes

9:56:10 PM #19 Text 0 File Cdrdrv.cpp, Line 9234
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

9:56:10 PM #20 SPTI -1046 File SCSIPassThrough.cpp, Line 179
CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 00 00 00 00 00 1C 2D 60 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05

9:56:10 PM #21 CDR -1046 File ThreadedTransferInterface.cpp, Line 1779
Illegal disc
F: _NEC DVD_RW ND-1300A

9:56:10 PM #22 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1779
Could not perform start of Disc-at-once

9:56:10 PM #23 Phase 38 File dlgbrnst.cpp, Line 1746
Burn process failed at 2.4x (3,324 KB/s)

9:56:10 PM #24 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

9:56:12 PM #25 Text 0 File Cdrdrv.cpp, Line 10467
DriveLocker: UnLockVolume completed

9:56:12 PM #26 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)