Optiarc AD-7170S Burn CRC Error (Ultra-DMA/32) - Club CDFreaks

Rimla · 29-04-2007

Hi, I have recently buy the Optiarc AD-7170S and it don't work on any burn, I have try with Nero (7.8.5.0) & Alcohol 120% (1.9.6 build 4719) I have always the same CRC Error (Ultra-DMA/32)... What can I do for remove that thing ?
For know: I have a chipset nForce4, maybe that can be useful...

The Nero log:

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.8.5.0
Internal Version: 7, 8, 5, 0
(Nero Express)
Recorder: Version: 1.00 - HA 1 TA 0 - 7.8.5.0
Adapter driver: HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: Version: 1.00 - HA 1 TA 0 - 7.8.5.0
Adapter driver: HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6L300R0 NvAtaBus Port 0 ID 0 DMA: Off
DiskPeripheral : WDC WD5000KS-00MNB0 NvAtaBus Port 1 ID 0 DMA: Off
CdRomPeripheral : Optiarc DVD RW AD-7170S NvAtaBus Port 1 ID 2 DMA: Off
DiskPeripheral : WDC WD5000KS-00MNB0 NvAtaBus Port 2 ID 2 DMA: Off

=== CDRom-Device-Map ===
Optiarc DVD RW AD-7170S F: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2046MB (2095536kB)
Free physical memory: 1332MB (1364544kB)
Memory in use : 34 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

29.4.2007
Compilation ISO
17:44:42 #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

17:44:42 #2 Text 0 File Isodoc.cpp, Line 6608
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

17:44:42 #3 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)

17:44:42 #4 Text 0 File Burncd.cpp, Line 3499
Turn on Disc-At-Once, using DVD media

17:44:48 #5 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 199023 ( 44:13.48, 388MB)

17:44:48 #6 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

17:44:48 #7 Text 0 File DlgWaitCD.cpp, Line 2949
Recorder: Optiarc DVD RW AD-7170S, Media type: DVD+RW
Disc Manufacturer ID: RICOHJPN, Media Type ID: W11, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 1

17:44:48 #8 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW; DVD R DL; DVD-RAM.)
This disc is not empty.
(Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW; DVD R DL; DVD-RAM.)
Accessing disc...
(Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW; DVD R DL; DVD-RAM.)

17:44:48 #9 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 199024 (199024) = #199024/44:13.49
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 199024 blocks [F: Optiarc DVD RW AD-7170S]
--------------------------------------------------------------

17:44:48 #10 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [F: Optiarc DVD RW AD-7170S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 407601152, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 199024 | 0 | 0x00
199024 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

17:44:48 #11 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

17:44:48 #12 Text 0 File Burncd.cpp, Line 4278
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

17:44:48 #13 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started

17:44:48 #14 Text 0 File Burncd.cpp, Line 4397
Cache writing successful.

17:44:48 #15 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed

17:44:48 #16 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 4x (5'540 Ko/s)

17:44:49 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

17:44:49 #18 Text 0 File Cdrdrv.cpp, Line 9859
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: RICOHJPN
Media type ID: W11
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 ...RICOHJPNW11.9
23 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #...............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

17:44:49 #19 SPTI -1065 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xF9 05 01 FF 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20

17:44:49 #20 SPTI -1065 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xF9 04 01 FF 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20

17:44:49 #21 Text 0 File DVDR.cpp, Line 7281
Drive: Optiarc DVD RW AD-7170S
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished with error, return code -1065

17:44:49 #22 Text 0 File DVDR.cpp, Line 6662
Drive: Optiarc DVD RW AD-7170S
Book Type request [NEC]: DVD-ROM
Changing the Book Type was finished with error, return code -1065

17:44:49 #23 Text 0 File DVDPlusRW.cpp, Line 674
Start write address at LBA 0
DVD high compatibility mode: Yes

17:44:49 #24 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800

17:45:08 #25 SPTI -1502 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1502)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x08
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 08 03
Buffer x06cf0040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

17:45:08 #26 CDR -1502 File Writer.cpp, Line 303
DMA-driver error, CRC error
F: Optiarc DVD RW AD-7170S

17:45:10 #27 Text 0 File DVDPlusRW.cpp, Line 934
EndDAO: Last written address 0

17:45:11 #28 SPTI -1065 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xF9 06 01 FF 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20

17:45:11 #29 Text 0 File DVDR.cpp, Line 7281
Drive: Optiarc DVD RW AD-7170S
Book Type request [gen]: DVD-ROM, direct update disc
Changing the Book Type was finished with error, return code -1065

17:45:11 #30 Text 0 File DVDR.cpp, Line 6662
Drive: Optiarc DVD RW AD-7170S
Book Type request [NEC]: DVD-ROM, direct update disc
Setting Book Type supported in EEPROM/RAM only

17:45:12 #31 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 4x (5'540 Ko/s)

17:45:12 #32 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

17:45:16 #33 Text 0 File Cdrdrv.cpp, Line 11214
DriveLocker: UnLockVolume completed

17:45:16 #34 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Here a Screen of Nero InfoTool:

Thanks for any help

*_chef_* · 30-04-2007

Update the nvidia ide drivers.

rmarier83 · 01-05-2007

I have this same exact problem too (I'm using the SATA version). This was happening before I flashed and after I flashed to a new firmware. Perhaps there's some resource problem or something, but this is SATA-that shouldn't be a problem.
The drive can read DVDs and CDs perfectly. Also, I tried burning a CD as well got the same errors in nero.

*_chef_* · 01-05-2007

Quote:

Originally Posted by rmarier83

I have this same exact problem too (I'm using the SATA version). This was happening before I flashed and after I flashed to a new firmware. Perhaps there's some resource problem or something, but this is SATA-that shouldn't be a problem.
The drive can read DVDs and CDs perfectly. Also, I tried burning a CD as well got the same errors in nero.

Nope.
Your have an SATA drive, so check your sata controller.

rmarier83 · 01-05-2007

There's nothing wrong with the connections; it wouldn't be able to be detected or read DVDs or CDs if it was a connection problem.
Nero 6, states it's a communication problem.
I've even updated my BIOS and hardware controllers as well-still no luck.

* serial removed *

Code:

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1017), size=48128 bytes, created 1/9/2007 5:13:01 AM 
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 6/17/2003 9:25:03 AM 
Nero version: 6.0.0.28 (Nero Express)
Recorder:              Version: 1.82 - HA 1 TA 0 - 6.0.0.28
 Adapter driver:                         HA 1
 Drive buffer  :      2048kB
 Bus Type      :      via Inquiry data (1) -> ATAPI, detected: ATAPI 
 Connected to MMC as unknown drive with class-nr : 1
 Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM:               Version: 1.82 - HA 1 TA 0 - 6.0.0.28
 Adapter driver:                         HA 1

=== Scsi-Device-Map ===
CdRomPeripheral      : Optiarc DVD RW AD-7170S          atapi Port 1 ID 0  DMA: On 
DiskPeripheral       : ST3120827AS                      atapi Port 2 ID 0  DMA: On 
CdRomPeripheral      : AXV     CD/DVD-ROM      2.2a  a347scsi Port 4 ID 0  DMA: Off

=== CDRom-Device-Map ===
Optiarc DVD RW AD-7170S    E:   CDRom0
AXV CD/DVD-ROM             G:   CDRom1
=======================

AutoRun : 1
Excluded drive IDs: 
CmdQueuing     : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed     : 0
BUFE           : 0
Physical memory     : 1021MB (1046248kB)
Free physical memory: 529MB (541752kB)
Memory in use       : 48 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

30.4.2007
CD-ROM (ISO)
10:36:25 PM	#1 Text 0 File Isodoc.cpp, Line 6024
	Iso document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate                : FALSE
	Write                   : TRUE
	Finalize CD             : FALSE
	Multisession            : FALSE
	Burning mode            : TAO
	Mode                    : 1
	ISO Level               : 1 (Max. of 11 = 8 + 3 char)
	Character set           : ISO 9660
	Joliet                  : TRUE
	Allow pathdepth more than 8 directories : TRUE
	Allow more than 255 characters in path  : TRUE
	Write ISO9660 ;1 file extensions        : TRUE
	
10:36:25 PM	#2 Phase 90 File dlgbrnst.cpp, Line 1800
	Buffer Underrun Protection activated
	
10:36:25 PM	#3 Text 0 File Reader.cpp, Line 118
	Reader running
	
10:36:25 PM	#4 Text 0 File Writer.cpp, Line 124
	Writer Optiarc  DVD RW AD-7170S  running
	
10:36:25 PM	#5 ISO9660GEN -11 File geniso.cpp, Line 3882
	First writeable address = 0 (0x00000000)
	
10:36:25 PM	#6 Text 0 File Burncd.cpp, Line 3128
	Turn on Track-at-once, using CD-R/RW media
	
10:36:25 PM	#7 Text 0 File DlgWaitCD.cpp, Line 237
	Last possible write address on media:   359844 (79:59.69)
	Last address to be written:             323562 (71:56.12)
	
10:36:25 PM	#8 Text 0 File DlgWaitCD.cpp, Line 242
	Write in overburning mode: FALSE
	
10:36:25 PM	#9 Text 0 File DlgWaitCD.cpp, Line 2043
	Recorder: Optiarc DVD RW AD-7170S;
	   CDR code: 00 97 15 17; OSJ entry from: Ritek Co.
	   ATIP Data:
	     Special    Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00)
	     Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
	
10:36:25 PM	#10 Text 0 File DlgWaitCD.cpp, Line 403
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
10:36:25 PM	#11 Text 0 File ThreadedTransferInterface.cpp, Line 775
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 (CTransferItem)
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 323563 (323563) = #323563/71:54.13
	    relocatable, disc pos for caching/writing not required/required, no patch infos 
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 323561 blocks [Optiarc  DVD RW AD-7170S ]
	--------------------------------------------------------------
	
10:36:25 PM	#12 Text 0 File ThreadedTransferInterface.cpp, Line 944
	Prepare recorder [Optiarc  DVD RW AD-7170S ] for write in TAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc not fixated
	 Tracks 1 to 1:
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0        307200     662964224, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
	    -150 |  lead-in |   0 |   0x00 |  0x41
	    -150 |        1 |   0 |   0x00 |  0x41
	       0 |        1 |   1 |   0x00 |  0x41
	  323563 | lead-out |   1 |   0x00 |  0x41
	
10:36:25 PM	#13 Text 0 File ThreadedTransferInterface.cpp, Line 971
	Removed 2 run-out blocks from end of track 1.
	
10:36:25 PM	#14 Phase 24 File dlgbrnst.cpp, Line 1800
	Caching of files started
	
10:36:26 PM	#15 Text 0 File Burncd.cpp, Line 4095
	Cache writing successful.
	
10:36:26 PM	#16 Phase 25 File dlgbrnst.cpp, Line 1800
	Caching of files completed
	
10:36:26 PM	#17 Phase 36 File dlgbrnst.cpp, Line 1800
	Burn process started at 40x (6,000 KB/s)
	
10:36:26 PM	#18 Text 0 File ThreadedTransferInterface.cpp, Line 2167
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
10:36:26 PM	#19 Text 0 File Mmc.cpp, Line 19362
	Set BUFE: supported -> ON 
	
10:37:30 PM	#20 SCSI -1024 File Cdrdrv.cpp, Line 1430
	SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04970000
	Status:     0x04 (0x01, SCSI_ERR)
	HA-Status   0x00 (0x00, OK)
	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
	Sense Key:  0x04 (KEY_HARDWARE_ERROR)
	Sense Code: 0x08
	Sense Qual: 0x03
	CDB Data:   0x2A 0x00 0x00 0x01 0x04 0x40 0x00 0x00 0x20 0x00 0x00 0x00 
	Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0A 
	            0x00 0x00 0x00 0x00 0x08 0x03 
	
10:37:30 PM	#21 CDR -1024 File Writer.cpp, Line 301
	Communication failure
	
10:37:30 PM	#22 Text 0 File ThreadedTransfer.cpp, Line 229
	all writers idle, stopping conversion
	
10:37:30 PM	#23 Text 0 File ThreadedTransfer.cpp, Line 223
	conversion idle, stopping reader
	
10:37:32 PM	#24 CDR -201 File WriterStatus.cpp, Line 193
	Invalid write state
	Optiarc DVD RW AD-7170S\H1 T0
	
10:37:32 PM	#25 TRANSFER -18 File WriterStatus.cpp, Line 193
	Could not perform EndTrack
	
10:37:32 PM	#26 Text 0 File Mmc.cpp, Line 14223
	 start Close Session
	
10:37:59 PM	#27 Text 0 File dlgbrnst.cpp, Line 1658
	Set remaining time: 0:00,000 (0ms) -> OK
	
10:37:59 PM	#28 Phase 38 File dlgbrnst.cpp, Line 1800
	Burn process failed at 40x (6,000 KB/s)
	

Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 10/4/2006 9:42:42 PM 
File 'Drivers\PXHELP20.SYS': Ver=3.00.41a, size=36560 bytes, created 9/27/2006 4:53:22 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=95360 bytes, created 8/3/2004 11:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

*_chef_* · 02-05-2007

As I said, your problem is not the same!

You try to burn on CD, the OP on DVD.

Uninstall Alcohol!

Use better media, burn slower.

And please don't post serials.

rmarier83 · 02-05-2007

Sorry about that posting, I didn't notice that it was in the log until afterwards. I actually have 2 DVD burners one is a NEC and the other is the one I'm having problems with.
My NEC burner, which is a IDE interface has no problems burning or reading anything. I've actually unplugged the IDE burner and tried burning with my SATA burner and still got problems.

One more thing, you mentioned about SATA controllers, is this something I can configure in Hardware manager, because I looked there and there's nothing for SATA, even though I also have a SATA HDD.

Schnuh330 · 11-05-2007

i'm having similar issues with this drive Sony/NEC Optiarc AD-7170S with nero and other burning software (alcohol 120%, IMGBurn, roxio. each were tried separately with other burning software uninstalled ) It reads discs but won't write to DVDs. i did manage to get it to burn an audio cd after uninstalling alcohol 120%. shows up in device manager as a SCSI drive but it is SATA. i updated the drivers for everything i could and tried several versions of several different burning softwares. haven't found a firmware update yet. i'm about ready to send it back and get an IDE drive might be easier. any suggestions?
burning on Sony discs (never had a coaster out of this pack till i got this drive) Changing burning speed has no effect whether i try to burn at 1x or 18x i get same result, a nice shiny new coaster.

wiak · 11-05-2007

Hello
i have had the same problems but after a firmware update it got fixed am using orginal 1.82 now old was 1.00

http://liggydee.cdfreaks.com/fwinfo/en/7170s/182

http://liggydee.cdfreaks.com/disclai..._orig.zip.html
http://liggydee.cdfreaks.com/disclai..._rpc1.zip.html

Schnuh330 · 11-05-2007

tried that still no luck (firmware flash).

firevenom · 16-05-2007

I have the exact same problem.

tried a number of things to resolve it even contacting sony nec optiarc directly, stillw aiting to hear from them.

updated to both firmwares available on this site to no joy.

will happily write CD-R on 2 various brands.

however on 2 various brands of DVD-R fails with errors as above.

I have noticed tho, if blank CD is inserted my computer will display the free space, however on the DVD-R it will not, any ideas as this might be a good clue to resolve it?

firevenom · 16-05-2007

by not showing space i mean:

FREE SPACE: 0bytes
AVAILABLE SPACE: 0 bytes once the DVD-RAM (DVD-R) is selected in my computer, the details on the left hand side is wheer you can see it, also after right clicking the drive and selecting properties.

29-04-2007	#1 (permalink)
Rimla New on Forum Join Date: Apr 2007 Posts: 1	Optiarc AD-7170S Burn CRC Error (Ultra-DMA/32) <a href='http://adstats.cdfreaks.com/www/delivery/ck.php?n=a13febf7&cb=INSERT_RANDOM_NUMBER_HERE' target='_blank'><img src='http://adstats.cdfreaks.com/www/delivery/avw.php?zoneid=30&cb=INSERT_RANDOM_NUMBER_HERE&n=a13febf7' border='0' alt='' /></a> Hi, I have recently buy the Optiarc AD-7170S and it don't work on any burn, I have try with Nero (7.8.5.0) & Alcohol 120% (1.9.6 build 4719) I have always the same CRC Error (Ultra-DMA/32)... What can I do for remove that thing ? For know: I have a chipset nForce4, maybe that can be useful... The Nero log: Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.8.5.0 Internal Version: 7, 8, 5, 0 (Nero Express) Recorder: Version: 1.00 - HA 1 TA 0 - 7.8.5.0 Adapter driver: HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: Version: 1.00 - HA 1 TA 0 - 7.8.5.0 Adapter driver: HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6L300R0 NvAtaBus Port 0 ID 0 DMA: Off DiskPeripheral : WDC WD5000KS-00MNB0 NvAtaBus Port 1 ID 0 DMA: Off CdRomPeripheral : Optiarc DVD RW AD-7170S NvAtaBus Port 1 ID 2 DMA: Off DiskPeripheral : WDC WD5000KS-00MNB0 NvAtaBus Port 2 ID 2 DMA: Off === CDRom-Device-Map === Optiarc DVD RW AD-7170S F: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 2046MB (2095536kB) Free physical memory: 1332MB (1364544kB) Memory in use : 34 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 29.4.2007 Compilation ISO 17:44:42 #1 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 17:44:42 #2 Text 0 File Isodoc.cpp, Line 6608 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 17:44:42 #3 ISO9660GEN -11 File Geniso.cpp, Line 3343 First writeable address = 0 (0x00000000) 17:44:42 #4 Text 0 File Burncd.cpp, Line 3499 Turn on Disc-At-Once, using DVD media 17:44:48 #5 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 199023 ( 44:13.48, 388MB) 17:44:48 #6 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 17:44:48 #7 Text 0 File DlgWaitCD.cpp, Line 2949 Recorder: Optiarc DVD RW AD-7170S, Media type: DVD+RW Disc Manufacturer ID: RICOHJPN, Media Type ID: W11, Product revision number: 1 Disc Application Code: 0, Extended Information Indicators: 1 17:44:48 #8 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert the disc to write to. (Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW; DVD R DL; DVD-RAM.) This disc is not empty. (Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW; DVD R DL; DVD-RAM.) Accessing disc... (Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW; DVD R DL; DVD-RAM.) 17:44:48 #9 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 199024 (199024) = #199024/44:13.49 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 199024 blocks [F: Optiarc DVD RW AD-7170S] -------------------------------------------------------------- 17:44:48 #10 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [F: Optiarc DVD RW AD-7170S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 407601152, ISRC "" DAO layout: =========== ___Start_\|____Track_\|_Idx_\|_CtrlAdr_\|_____Size_\|______NWA_\|_RecDep__________ 0 \| lead-in \| 0 \| 0x41 \| 0 \| 0 \| 0x00 0 \| 1 \| 0 \| 0x41 \| 0 \| 0 \| 0x00 0 \| 1 \| 1 \| 0x41 \| 199024 \| 0 \| 0x00 199024 \| lead-out \| 1 \| 0x41 \| 0 \| 0 \| 0x00 17:44:48 #11 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 17:44:48 #12 Text 0 File Burncd.cpp, Line 4278 Caching options: cache CDRom or Network-Yes, small files-No (<64KB) 17:44:48 #13 Phase 24 File dlgbrnst.cpp, Line 1762 Caching of files started 17:44:48 #14 Text 0 File Burncd.cpp, Line 4397 Cache writing successful. 17:44:48 #15 Phase 25 File dlgbrnst.cpp, Line 1762 Caching of files completed 17:44:48 #16 Phase 36 File dlgbrnst.cpp, Line 1762 Burn process started at 4x (5'540 Ko/s) 17:44:49 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 17:44:49 #18 Text 0 File Cdrdrv.cpp, Line 9859 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+RW (9), Part Version: 1.1x (2) Disc Size: 120 mm, Maximum Rate: (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 1 h Disc Manufacturer ID: RICOHJPN Media type ID: W11 Product revision number: 1 Number of Physical format information bytes in use in ADIP up to byte 63: 57 Media Specific [16..63]: 00 00 01 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 ...RICOHJPNW11.9 23 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #............... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 17:44:49 #19 SPTI -1065 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xF9 05 01 FF 00 00 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20 17:44:49 #20 SPTI -1065 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xF9 04 01 FF 00 00 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20 17:44:49 #21 Text 0 File DVDR.cpp, Line 7281 Drive: Optiarc DVD RW AD-7170S Book Type request [gen]: DVD-ROM, write to EEPROM Changing the Book Type was finished with error, return code -1065 17:44:49 #22 Text 0 File DVDR.cpp, Line 6662 Drive: Optiarc DVD RW AD-7170S Book Type request [NEC]: DVD-ROM Changing the Book Type was finished with error, return code -1065 17:44:49 #23 Text 0 File DVDPlusRW.cpp, Line 674 Start write address at LBA 0 DVD high compatibility mode: Yes 17:44:49 #24 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 83836800 17:45:08 #25 SPTI -1502 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1502) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x08 Sense Qual: 0x03 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 08 03 Buffer x06cf0040: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 17:45:08 #26 CDR -1502 File Writer.cpp, Line 303 DMA-driver error, CRC error F: Optiarc DVD RW AD-7170S 17:45:10 #27 Text 0 File DVDPlusRW.cpp, Line 934 EndDAO: Last written address 0 17:45:11 #28 SPTI -1065 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xF9 06 01 FF 00 00 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20 17:45:11 #29 Text 0 File DVDR.cpp, Line 7281 Drive: Optiarc DVD RW AD-7170S Book Type request [gen]: DVD-ROM, direct update disc Changing the Book Type was finished with error, return code -1065 17:45:11 #30 Text 0 File DVDR.cpp, Line 6662 Drive: Optiarc DVD RW AD-7170S Book Type request [NEC]: DVD-ROM, direct update disc Setting Book Type supported in EEPROM/RAM only 17:45:12 #31 Phase 38 File dlgbrnst.cpp, Line 1762 Burn process failed at 4x (5'540 Ko/s) 17:45:12 #32 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 17:45:16 #33 Text 0 File Cdrdrv.cpp, Line 11214 DriveLocker: UnLockVolume completed 17:45:16 #34 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) Here a Screen of Nero InfoTool: Thanks for any help

30-04-2007	#2 (permalink)
_chef_ CDFreaks Resident Join Date: Aug 2004 Location: @FX labs .de ...watching [Benders.Big.Score] [Tripping.The.Rift.The.Movie] Posts: 23,950	Re: Optiarc AD-7170S Burn CRC Error (Ultra-DMA/32) Update the nvidia ide drivers. __________________ Started with burning capable optical drives (CD-R) in 1997. Bought optical drives from AOpen, HP, LiteOn, NEC, Philips, Pioneer, Plextor, Ricoh, Samsung, Sanyo, Toshiba and Yamaha. *'Things are now in motion that cannot be undone.' [Gandalf, LoTR]* Enable DMA with micrAp$0ft Enable DMA free at your will busTRACE => Upper/Lower Filters Util DevCon *HOW TO ... Delete the Upper & Lower Filters!* If you expect help then please start by using the powerful SEARCH.

01-05-2007	#3 (permalink)
rmarier83 New on Forum Join Date: May 2007 Posts: 3	Re: Optiarc AD-7170S Burn CRC Error (Ultra-DMA/32) I have this same exact problem too (I'm using the SATA version). This was happening before I flashed and after I flashed to a new firmware. Perhaps there's some resource problem or something, but this is SATA-that shouldn't be a problem. The drive can read DVDs and CDs perfectly. Also, I tried burning a CD as well got the same errors in nero.

02-05-2007	#6 (permalink)
_chef_ CDFreaks Resident Join Date: Aug 2004 Location: @FX labs .de ...watching [Benders.Big.Score] [Tripping.The.Rift.The.Movie] Posts: 23,950	Re: Optiarc AD-7170S Burn CRC Error (Ultra-DMA/32) As I said, your problem is not the same! You try to burn on CD, the OP on DVD. Uninstall Alcohol! Use better media, burn slower. And please don't post serials. __________________ Started with burning capable optical drives (CD-R) in 1997. Bought optical drives from AOpen, HP, LiteOn, NEC, Philips, Pioneer, Plextor, Ricoh, Samsung, Sanyo, Toshiba and Yamaha. *'Things are now in motion that cannot be undone.' [Gandalf, LoTR]* Enable DMA with micrAp$0ft Enable DMA free at your will busTRACE => Upper/Lower Filters Util DevCon *HOW TO ... Delete the Upper & Lower Filters!* If you expect help then please start by using the powerful SEARCH.

02-05-2007	#7 (permalink)
rmarier83 New on Forum Join Date: May 2007 Posts: 3	Re: Optiarc AD-7170S Burn CRC Error (Ultra-DMA/32) Sorry about that posting, I didn't notice that it was in the log until afterwards. I actually have 2 DVD burners one is a NEC and the other is the one I'm having problems with. My NEC burner, which is a IDE interface has no problems burning or reading anything. I've actually unplugged the IDE burner and tried burning with my SATA burner and still got problems. One more thing, you mentioned about SATA controllers, is this something I can configure in Hardware manager, because I looked there and there's nothing for SATA, even though I also have a SATA HDD.

Commercial message
<a href='http://adstats.cdfreaks.com/www/delivery/ck.php?n=a5c5554b&cb=INSERT_RANDOM_NUMBER_HERE' target='_blank'><img src='http://adstats.cdfreaks.com/www/delivery/avw.php?zoneid=29&cb=INSERT_RANDOM_NUMBER_HERE&n=a5c5554b' border='0' alt='' /></a>

11-05-2007	#8 (permalink)
Schnuh330 New on Forum Join Date: May 2007 Posts: 2	Re: Optiarc AD-7170S Burn CRC Error (Ultra-DMA/32) i'm having similar issues with this drive Sony/NEC Optiarc AD-7170S with nero and other burning software (alcohol 120%, IMGBurn, roxio. each were tried separately with other burning software uninstalled ) It reads discs but won't write to DVDs. i did manage to get it to burn an audio cd after uninstalling alcohol 120%. shows up in device manager as a SCSI drive but it is SATA. i updated the drivers for everything i could and tried several versions of several different burning softwares. haven't found a firmware update yet. i'm about ready to send it back and get an IDE drive might be easier. any suggestions? burning on Sony discs (never had a coaster out of this pack till i got this drive) Changing burning speed has no effect whether i try to burn at 1x or 18x i get same result, a nice shiny new coaster.

11-05-2007	#9 (permalink)
wiak New on Forum Join Date: Aug 2005 Posts: 13	Re: Optiarc AD-7170S Burn CRC Error (Ultra-DMA/32) Hello i have had the same problems but after a firmware update it got fixed am using orginal 1.82 now old was 1.00 http://liggydee.cdfreaks.com/fwinfo/en/7170s/182 http://liggydee.cdfreaks.com/disclai..._orig.zip.html http://liggydee.cdfreaks.com/disclai..._rpc1.zip.html

11-05-2007	#10 (permalink)
Schnuh330 New on Forum Join Date: May 2007 Posts: 2	Re: Optiarc AD-7170S Burn CRC Error (Ultra-DMA/32) tried that still no luck (firmware flash).

16-05-2007	#11 (permalink)
firevenom New on Forum Join Date: May 2007 Posts: 13	Re: Optiarc AD-7170S Burn CRC Error (Ultra-DMA/32) I have the exact same problem. tried a number of things to resolve it even contacting sony nec optiarc directly, stillw aiting to hear from them. updated to both firmwares available on this site to no joy. will happily write CD-R on 2 various brands. however on 2 various brands of DVD-R fails with errors as above. I have noticed tho, if blank CD is inserted my computer will display the free space, however on the DVD-R it will not, any ideas as this might be a good clue to resolve it?

16-05-2007	#12 (permalink)
firevenom New on Forum Join Date: May 2007 Posts: 13	Re: Optiarc AD-7170S Burn CRC Error (Ultra-DMA/32) by not showing space i mean: FREE SPACE: 0bytes AVAILABLE SPACE: 0 bytes once the DVD-RAM (DVD-R) is selected in my computer, the details on the left hand side is wheer you can see it, also after right clicking the drive and selecting properties.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CRC error in Ultra-DMA/32 - SOMEONE PLEASE HELP!!!!	amadhatter53	VSO Software	11	17-04-2008 07:59
Issues with Optiarc AD-7170S in Vista 32	XndeX	NEC / Optiarc Burner	8	13-04-2008 20:50
Sony DRU-720A "LOGICAL UNIT COMMUNICATION CRC ERROR (ULTRA-DMA/32) (040803)"	seioz	LiteOn / PLDS/ Sony Burner	12	09-09-2006 08:46
error ultra dma/32 (040803)	stevie gee	Asus / Pioneer Burner	1	30-08-2006 12:46
LG 4167b: "Logical Unit Communication CRC Error (Ultra-DMA/32)"	bmonk	LG Burner	3	04-02-2006 23:30