Please help. I'm at wits end - Club CDFreaks

BLUEPSTU · 18-02-2008

Been coming here for years but this is my first post because i have always been able to use these posts to solve problems. I'm having problems burning dvds. Sometimes it works sometimes it doesn't. I found out some problems like the DMA was off and I fixed that. Nero is not working on the burn process. It doesn't matter if I recode and try to put it on single layer or if I copy at normal size and use dual layer. I have included the log file to see if anyone with knowledge in this matter can help. Thanks so much. I do notice that one area does say check supported media is disabled but do not know if this is causing the problem. This is trying all types of media whether it is verbatim or whatever.

Code:

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 8:20:56 AM 
ahead WinASPI: File 'E:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 11:35:32 AM 

Nero Version: 6.6.0.14
Internal Version: 6, 6, 0, 14d
 (Nero Express)
Recorder:             <SONY DVD RW DRU-810A>    Version: 1.0f - HA 5 TA 0 - 6.6.0.14
 Adapter driver:      <atapi>                   HA 5
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ATAPI 
CD-ROM:               <SONY     DVD RW DRU-810A >Version: 1.0f - HA 5 TA 0 - 6.6.0.14
 Adapter driver:      <atapi>                   HA 5
=== Scsi-Device-Map ===
DiskPeripheral       : WDC WD2500JB-00REA0              atapi Port 0 ID 0  DMA: On 
CdRomPeripheral      : SONY DVD RW DRU-810A             atapi Port 5 ID 0  DMA: On 
=== CDRom-Device-Map ===
SONY DVD RW DRU-810A       D:   CDRom0
=======================
AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 2046MB (2095532kB)
Free physical memory: 1507MB (1544024kB)
Memory in use       : 26 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 
18.2.2008
===== Disc-Copy over image - 1st step : Copy to image  ...
6:53:55 AM #1 Text 0 File Reader.cpp, Line 127
 Reader running
 
6:53:55 AM #2 Text 0 File Writer.cpp, Line 122
 Writer  Image Recorder      running
 
6:53:55 AM #3 Text 0 File DVDCopy.cpp, Line 279
 DVD Track-Information from source disc
 Last LBA on layer 0 =  1686623 / 0x19BC5F / 3294MB
  S01 T01 Con 0x14 Start       0 Len 2923744 (gap       0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
 
6:53:55 AM #4 Text 0 File DVDCopy.cpp, Line 382
 Max -1 tracks of 1 allowed to copy
  1:        0 -  2923744 =  2923744, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
 
6:53:55 AM #5 Text 0 File Burncd.cpp, Line 3230
 Turn on Disc-At-Once, using DVD media
 
6:53:55 AM #6 Text 0 File DlgWaitCD.cpp, Line 267
 Last possible write address on media:  4718591 (1048:34.41, 9215MB)
 Last address to be written:            2923743 (649:43.18, 5710MB)
 
6:53:55 AM #7 Text 0 File DlgWaitCD.cpp, Line 279
 Write in overburning mode: NO (enabled: CD)
 
6:53:55 AM #8 Text 0 File DlgWaitCD.cpp, Line 2433
 Recorder:  Image Recorder;
    CD type reading failed
    ATIP Data: ?
 
6:53:55 AM #9 Text 0 File DlgWaitCD.cpp, Line 445
 >>> Protocol of DlgWaitCD activities: <<<
 =========================================
 
6:53:55 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
 Setup items (after recorder preparation)
  0: TRM_DATA_MODE1 (1 - Data (mode 1))
     2 indices, index0 (150) not provided
     original disc pos #0 + 2923744 (2923744) = #2923744/649:43.19
     not relocatable, disc pos for caching/writing not required/not required, no patch infos
     -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2923744 blocks [Image Recorder]
 --------------------------------------------------------------
 
6:53:55 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
 Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
 DAO infos:
 ==========
  MCN: ""
  TOCType: 0x40; Session Closed, disc fixated
  Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    5987827712, ISRC ""
 DAO layout:
 ===========
  __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
        0 |  lead-in |   0 |    0x41 | 0x00
        0 |        1 |   0 |    0x41 | 0x00
        0 |        1 |   1 |    0x41 | 0x00
  2923744 | lead-out |   1 |    0x41 | 0x00
 
6:53:55 AM #12 Phase 120 File dlgbrnst.cpp, Line 1832
 Creating the image for burning
 
6:53:55 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2643
 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
 
7:02:31 AM #14 Text 0 File WriterStatus.cpp, Line 116
 < Image Recorder     > start writing Lead-Out at LBA 2923744 (2C9CE0h), lenght 0 blocks
 
7:02:31 AM #15 Text 0 File ThreadedTransfer.cpp, Line 228
 all writers idle, stopping conversion
 
7:02:31 AM #16 Phase 121 File dlgbrnst.cpp, Line 1832
 Creating Image completed successfully
 

===== Disc-Copy over image - 2nd step : Burn the image ...
7:02:39 AM #1 Text 0 File Reader.cpp, Line 127
 Reader running
 
7:02:39 AM #2 Text 0 File Writer.cpp, Line 122
 Writer SONY     DVD RW DRU-810A  running
 
7:02:39 AM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
 Image was written as DAO.
 DAOI:
  MediaCatalogNumber = ''
  TocType = 0x40
  Finalized =  1
  First/Last Track =  1 /  1
   1: ISRC = ''
      Blocksize = 2048
      TrackMode = 'TRM_DATA_MODE1'
      TrackConfig = 0x00
      First/Last Index =  0 /  1
      Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 5987827712
 CUES:
    0: Ctrl=0x41 Trk=  0 (0x00) Index=00 Start=00:00.00 (        0) RecDep=0x00
    1: Ctrl=0x41 Trk=  1 (0x01) Index=00 Start=00:00.00 (        0) RecDep=0x00
    2: Ctrl=0x41 Trk=  1 (0x01) Index=01 Start=00:00.00 (        0) RecDep=0x00
    3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=649:43.19 (  2923744) RecDep=0x00
 LBRK: Last LBA on layer 0 =  1686623 / 0x19BC5F / 3294MB
 MTYP: Mediumtype =  DVD (old format) (0x1C)
 Image file name: <E:\temp nero folder\TempImage.nrg>
 
7:02:39 AM #4 Text 0 File Burncd.cpp, Line 3230
 Turn on Disc-At-Once, using DVD media
 
7:08:43 AM #5 Text 0 File DlgWaitCD.cpp, Line 267
 Last possible write address on media:  4173823 (927:30.73, 8151MB)
 Last address to be written:            2923743 (649:43.18, 5710MB)
 
7:08:43 AM #6 Text 0 File DlgWaitCD.cpp, Line 279
 Write in overburning mode: NO (enabled: CD)
 
7:08:43 AM #7 Text 0 File DlgWaitCD.cpp, Line 2433
 Recorder: SONY DVD RW DRU-810A, Media type: DVD+R9 Double Layer
 
7:08:43 AM #8 Text 0 File DlgWaitCD.cpp, Line 445
 >>> Protocol of DlgWaitCD activities: <<<
 =========================================
 Insert empty disc to write to.
  (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-R DL, DVD+R DL.)
 
7:08:43 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 830
 Setup items (after recorder preparation)
  0: TRM_DATA_MODE1 (1 - DVD-ROM)
     2 indices, index0 (150) not provided
     original disc pos #0 + 2923744 (2923744) = #2923744/649:43.19
     not relocatable, disc pos for caching/writing not required/not required, no patch infos
     -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2923744 blocks [SONY     DVD RW DRU-810A]
 --------------------------------------------------------------
 
7:08:43 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1043
 Prepare recorder [SONY     DVD RW DRU-810A] for write in CUE-sheet-DAO
 DAO infos:
 ==========
  MCN: ""
  TOCType: 0x40; Session Closed, disc fixated
  Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    5987827712, ISRC ""
 DAO layout:
 ===========
  __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
        0 |  lead-in |   0 |    0x41 | 0x00
        0 |        1 |   0 |    0x41 | 0x00
        0 |        1 |   1 |    0x41 | 0x00
  2923744 | lead-out |   1 |    0x41 | 0x00
 
7:08:43 AM #11 Phase 36 File dlgbrnst.cpp, Line 1832
 Burn process started at 8x (11,080 KB/s)
 
7:08:43 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2643
 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
 
7:08:43 AM #13 SCSI -1066 File Cdrdrv.cpp, Line 1182
 SCSI Exec, HA 5, TA 0, LUN 0, buffer 0x03430600
 Status:     0x04 (0x01, SCSI_ERR)
 HA-Status   0x00 (0x00, OK)
 TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
 Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
 Sense Code: 0x24
 Sense Qual: 0x00
 CDB Data:   0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x21 0x08 0x04 0x00 0x00 
 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 
             0x00 0x00 0x00 0x00 0x24 0x00 
 
7:08:43 AM #14 Text 0 File DVDPlusDualLayer.cpp, Line 595
 L0 Data Zone Capacity set to 1686624 (19BC60h, 3294MB) -> OK, confirmed setting
 
7:08:43 AM #15 CDR -1205 File DVDPlusDualLayer.cpp, Line 622
 Burning Layer 1
 
7:08:43 AM #16 Text 0 File DVDPlusDualLayer.cpp, Line 632
 Start writing layer 1 at address 0 (0h)
 Recording mode: unknown Recording Mode
 
7:08:43 AM #17 SCSI -1066 File Cdrdrv.cpp, Line 1182
 SCSI Exec, HA 5, TA 0, LUN 0, buffer 0x03430600
 Status:     0x04 (0x01, SCSI_ERR)
 HA-Status   0x00 (0x00, OK)
 TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
 Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
 Sense Code: 0x24
 Sense Qual: 0x00
 CDB Data:   0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 
 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 
             0x00 0x00 0x00 0x00 0x24 0x00 
 
7:08:43 AM #18 CDR -1207 File DVDR.cpp, Line 4938
 Book Type automatically set to: Current recorder setting
 
7:08:43 AM #19 Text 0 File DVDPlusRW.cpp, Line 655
 Start write address at LBA 0
 DVD high compatibility mode: Yes
 
7:09:08 AM #20 SCSI -1176 File Cdrdrv.cpp, Line 1436
 SCSI Exec, HA 5, TA 0, LUN 0, buffer 0x03540000
 Status:     0x04 (0x01, SCSI_ERR)
 HA-Status   0x00 (0x00, OK)
 TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
 Sense Key:  0x03 (KEY_MEDIUM_ERROR)
 Sense Code: 0x72
 Sense Qual: 0x01
 CDB Data:   0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 
 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12 
             0x00 0x00 0x00 0x00 0x72 0x01 
 
7:09:08 AM #21 CDR -1176 File Writer.cpp, Line 311
 Session fixation error
 
7:09:08 AM #22 Text 0 File ThreadedTransfer.cpp, Line 228
 all writers idle, stopping conversion
 
7:09:09 AM #23 Text 0 File ThreadedTransfer.cpp, Line 222
 conversion idle, stopping reader
 
7:09:09 AM #24 SCSI -1176 File Cdrdrv.cpp, Line 1182
 SCSI Exec, HA 5, TA 0, LUN 0
 Status:     0x04 (0x01, SCSI_ERR)
 HA-Status   0x00 (0x00, OK)
 TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
 Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
 Sense Code: 0x72
 Sense Qual: 0x03
 CDB Data:   0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 
 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 
             0x00 0x00 0x00 0x00 0x72 0x03 
 
7:09:09 AM #25 Phase 127 File dlgbrnst.cpp, Line 1832
 Generating DVD high compatibility borders
 
7:09:09 AM #26 Phase 129 File dlgbrnst.cpp, Line 1832
 Generating DVD borders completed successfully
 
7:09:09 AM #27 Phase 38 File dlgbrnst.cpp, Line 1832
 Burn process failed at 8x (11,080 KB/s)
 
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 7:53:02 AM 
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option

beef barley · 18-02-2008

Try this & see if we can take Nero out of the equation, Post #18.

http://club.cdfreaks.com/f34/reading...r-dvds-235705/

BLUEPSTU · 18-02-2008

Thanks for the reply. I looked at the link you told me to. Are there programs out there that I can download for free that will take the place of nero? Also, does anyone know what the problem with nero can be since it has worked so many times before? Thanks.

Gummigutta · 19-02-2008

Quote:

Media type: DVD+R9 Double Layer

Could very well be this:

1. 8X burning might be to fast.
2. The latest firmware released is rather old, it might not 100% support the media code on your discs.
3. +R9 discs are tricky to write to

For free programs you could try ImgBurn.

BLUEPSTU · 19-02-2008

Thanks for the reply. I have downloaded Imgburn and am trying to figure it out now. I guess I'll try to look in the help section of Img to figure it out. It doesn't seem as easy as nero but may be after i play around with it a little bit.

Gummigutta · 19-02-2008

Use the build mode to

1) burn directly to your disc
2) create an ISO file for later burning on disc

Select the folder that holds the VIDEO_TS files you want to process. The program will tell you if you do something wrong or forget some steps.

I never liked to create .nrg files from Recode. It's a very slow creation process. So just output them in a VIDEO_TS map on your hard disk and then use ImgBurn to get them to your disc.

Good Luck!

beef barley · 20-02-2008

http://forum.imgburn.com/index.php?showforum=4

18-02-2008	#2 (permalink)
beef barley CD Freaks Die Hard Join Date: Jun 2007 Location: Canada Region 1 Posts: 1,595	Re: Please help. I'm at wits end Try this & see if we can take Nero out of the equation, Post #18. http://club.cdfreaks.com/f34/reading...r-dvds-235705/ __________________ System #1: Microsoft Windows Xp Pro 2002 SP3/Windows XP Pro X64 Edition 2003 SP2. AMD Phenom (tm) 9550 Quad Core Processor 2.20 GHz. 4 x 2GB of RAM. Samsung TSSTcorp SH-S203B (SB04 fully patched), Pioneer DVR-215D (1.18 patched), LG HL-DT-ST GSA H62N (CL01), Plextor PX-716A (1.11), BenQ #2 DW-1620 (B7W9) & externals BenQ #3 Ew-1621 (47P9), BenQ #1 EW-1621 (47L9), LG GSA-H10N (JL12). System #2: Microsoft Windows Xp Pro 2002 SP3. AMD Athlon(tm) 64 x 2 Dual Core Processor 4400+ 2.31 GHz 4 GBs RAM. Samsung SH-S182D (SB06), Samsung SH-S202J (SB01), Plextor PX-810SA (1.01), Samsung SH-S203B (SB03 FB FR). System specs as of 07052008

18-02-2008	#3 (permalink)
BLUEPSTU New on Forum Join Date: Feb 2008 Posts: 3	Re: Please help. I'm at wits end Thanks for the reply. I looked at the link you told me to. Are there programs out there that I can download for free that will take the place of nero? Also, does anyone know what the problem with nero can be since it has worked so many times before? Thanks.

19-02-2008	#5 (permalink)
BLUEPSTU New on Forum Join Date: Feb 2008 Posts: 3	Re: Please help. I'm at wits end Thanks for the reply. I have downloaded Imgburn and am trying to figure it out now. I guess I'll try to look in the help section of Img to figure it out. It doesn't seem as easy as nero but may be after i play around with it a little bit.

19-02-2008	#6 (permalink)
Gummigutta CD Freaks Senior Member Join Date: Oct 2007 Location: Sweden Posts: 454	Re: Please help. I'm at wits end Use the build mode to 1) burn directly to your disc 2) create an ISO file for later burning on disc Select the folder that holds the VIDEO_TS files you want to process. The program will tell you if you do something wrong or forget some steps. I never liked to create .nrg files from Recode. It's a very slow creation process. So just output them in a VIDEO_TS map on your hard disk and then use ImgBurn to get them to your disc. Good Luck!

20-02-2008	#7 (permalink)
beef barley CD Freaks Die Hard Join Date: Jun 2007 Location: Canada Region 1 Posts: 1,595	Re: Please help. I'm at wits end http://forum.imgburn.com/index.php?showforum=4 __________________ System #1: Microsoft Windows Xp Pro 2002 SP3/Windows XP Pro X64 Edition 2003 SP2. AMD Phenom (tm) 9550 Quad Core Processor 2.20 GHz. 4 x 2GB of RAM. Samsung TSSTcorp SH-S203B (SB04 fully patched), Pioneer DVR-215D (1.18 patched), LG HL-DT-ST GSA H62N (CL01), Plextor PX-716A (1.11), BenQ #2 DW-1620 (B7W9) & externals BenQ #3 Ew-1621 (47P9), BenQ #1 EW-1621 (47L9), LG GSA-H10N (JL12). System #2: Microsoft Windows Xp Pro 2002 SP3. AMD Athlon(tm) 64 x 2 Dual Core Processor 4400+ 2.31 GHz 4 GBs RAM. Samsung SH-S182D (SB06), Samsung SH-S202J (SB01), Plextor PX-810SA (1.01), Samsung SH-S203B (SB03 FB FR). System specs as of 07052008

Commercial message
<a href='http://adstats.cdfreaks.com/www/delivery/ck.php?n=a5c5554b&cb=INSERT_RANDOM_NUMBER_HERE' target='_blank'><img src='http://adstats.cdfreaks.com/www/delivery/avw.php?zoneid=29&cb=INSERT_RANDOM_NUMBER_HERE&n=a5c5554b' border='0' alt='' /></a>

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help, At Wits End !!!	gollum456	General Hardware Forum	29	01-11-2007 02:33
At my wits end with PX755A	MultiMan	Plextor Burner	7	17-07-2007 08:54
I'm At My Wits End Now	Dr. Who	General Hardware Forum	5	10-07-2006 22:15
help pleeese at wits end	monkog	Newbie Forum	3	11-12-2005 16:00
I'm at my wits end!!!	Lynn-n-ohio	Clone CD	5	10-12-2004 05:11