Nero Recode 2.0.0.7 - Club CDFreaks

Foden · 04-01-2004

Hi, I been trying to get Recode to work without any success. My test subjects are DVD's that I have created and are not encrypted.

I have tried every possible combination of options in Recode and have used a real DVD and an ISO mounted on ImageDrive and they all fail with...

"Nero Recode 2 encountered an error and cannot continue.
Encoding error - illegal program state occurred."

This error occurs a few seconds after browsing to the DVD source and results in my having to terminate Recode with task manager.

PC Spec
Windows XP SP1
Intel P4 2.4
512Mb RAM
2 x 80Gb HD
NVIDIA GeForce4 Ti 4600
SB Live!

TIA Foden

*JeanLuc* · 04-01-2004

Same with me ... happens reproducible when ripping from DVD-ROM (@ around 75% of encoding) or mounted image (@ the beginning bitrate distribution scan) ...

SeaWulf · 05-02-2004

I was getting the same error when trying to burn a DVD from a folder on hard disk, which was playable with Showtime, I was using Recode V2.0.0.7. I just updated to V2.0.0.12 and got the same result.

CW

Foden · 05-02-2004

I have also just updated to V2.0.0.12 and got exactly the same result.

Foden · 06-02-2004

Following suggestion from Nero Tech support I have just done a full un-install and re-install of Nero. Followed the instructions to the letter, tried Recode and ......

same damn problem.

I also had to re-install PowerDVD which mysteriously failed to work properly after the un/re install.

I've had it with Recode for now.

Hope you guys have better luck.

*JeanLuc* · 07-02-2004

I tried the latest recode version on a freshly-installed Windows as well ... no luck either.

Funny thing is ... DVD Shrink also crashes during transcoding (and Recode's transcoder is based on DVD Shrink) so I think there must be some issue with my hardware ... even with a non-overclocked CPU and very conservative RAM timings, the problem occurs.

Prime95's torture test can run a whole night without reporting problems with my system so I seriously doubt there is some hardware defect ...

*cynthia_old* · 09-02-2004

Sounds like a problem I had whit two movies.

Found the solution in this thread:

http://forum.digital-digest.com/show...threadid=29716

Those two movies always stopped at 50 % in the encoding.

04-01-2004	#2 (permalink)
JeanLuc CDFreaks Resident Join Date: Aug 2002 Location: Cologne, Germany Posts: 680	Same with me ... happens reproducible when ripping from DVD-ROM (@ around 75% of encoding) or mounted image (@ the beginning bitrate distribution scan) ... __________________ Rig 01: BenQ DD-DW1655 BCDB Speedhack Plextor PX-755A 1.04 Plextor Premium 1.06 Sony DW-G120A @ LiteOn SHM-165P6S MS0P Rig 02: 'Real' Pioneer DVR-K15 1.00 in Sony Vaio VGN-285M ... thanks to DVR Flash 2.2 ... but PX-712UF is still kickin' arse Reserve Units: LG GCE-8400B LG GDR-8163B LiteOn LTR-52246S Plextor PX-116A BTC BDV-316E BenQ DW-1640 Plextor PX-712A Plextor PX-716A Plextor Premium 1.06 LiteOn SOHD-167T 9S19 Speedhack Plextor PX-40TSi 1.05

07-02-2004	#6 (permalink)
JeanLuc CDFreaks Resident Join Date: Aug 2002 Location: Cologne, Germany Posts: 680	I tried the latest recode version on a freshly-installed Windows as well ... no luck either. Funny thing is ... DVD Shrink also crashes during transcoding (and Recode's transcoder is based on DVD Shrink) so I think there must be some issue with my hardware ... even with a non-overclocked CPU and very conservative RAM timings, the problem occurs. Prime95's torture test can run a whole night without reporting problems with my system so I seriously doubt there is some hardware defect ... __________________ Rig 01: BenQ DD-DW1655 BCDB Speedhack Plextor PX-755A 1.04 Plextor Premium 1.06 Sony DW-G120A @ LiteOn SHM-165P6S MS0P Rig 02: 'Real' Pioneer DVR-K15 1.00 in Sony Vaio VGN-285M ... thanks to DVR Flash 2.2 ... but PX-712UF is still kickin' arse Reserve Units: LG GCE-8400B LG GDR-8163B LiteOn LTR-52246S Plextor PX-116A BTC BDV-316E BenQ DW-1640 Plextor PX-712A Plextor PX-716A Plextor Premium 1.06 LiteOn SOHD-167T 9S19 Speedhack Plextor PX-40TSi 1.05

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
avi film gebrand op dvd met nero recode-> nero digital??	Banjo_burningman	Dutch: De Woonkamer	2	25-08-2006 15:29
Recode Main Movie to Nero Digital taking too long to recode?!	Auzzie Kid	Nero Recode	2	03-03-2006 17:22
Problem with latest version of Nero Recode (Nero Recode 2.2.6.1 )	msnerd	Nero Recode	8	14-07-2005 15:42
nero recode for first time, but i dont have the nero digital or mp4 options	redninja	General Software	1	20-12-2004 03:11
Problems with web version of Nero 6 Ultra Edition (mostly with Nero Recode)	neothe0ne	Nero & InCD	4	31-10-2004 07:20

Commercial message
<a href='http://adstats.cdfreaks.com/www/delivery/ck.php?n=a5c5554b&cb=INSERT_RANDOM_NUMBER_HERE' target='_blank'><img src='http://adstats.cdfreaks.com/www/delivery/avw.php?zoneid=29&cb=INSERT_RANDOM_NUMBER_HERE&n=a5c5554b' border='0' alt='' /></a>

05-02-2004	#3 (permalink)
SeaWulf New on Forum Join Date: Nov 2003 Posts: 14	I was getting the same error when trying to burn a DVD from a folder on hard disk, which was playable with Showtime, I was using Recode V2.0.0.7. I just updated to V2.0.0.12 and got the same result. CW

05-02-2004	#4 (permalink)
Foden New on Forum Join Date: Mar 2003 Posts: 3	I have also just updated to V2.0.0.12 and got exactly the same result.

06-02-2004	#5 (permalink)
Foden New on Forum Join Date: Mar 2003 Posts: 3	Following suggestion from Nero Tech support I have just done a full un-install and re-install of Nero. Followed the instructions to the letter, tried Recode and ...... same damn problem. I also had to re-install PowerDVD which mysteriously failed to work properly after the un/re install. I've had it with Recode for now. Hope you guys have better luck.

09-02-2004	#7 (permalink)
cynthia_old CDFreaks Resident Join Date: Feb 2004 Location: Niue Posts: 539	Sounds like a problem I had whit two movies. Found the solution in this thread: http://forum.digital-digest.com/show...threadid=29716 Those two movies always stopped at 50 % in the encoding.