Be part of the largest consumer electronics community of the world! Register now and join all the other happy members
| |||||||
| Commercial message | |
| | |
| | | |
|
 |
| | Thread Tools |
15-07-2005
| #1 (permalink) |
| New on Forum Join Date: Jul 2005
Posts: 1
| Problem burning DVD with BTC DRW-1108IM Hey... Im having a problem with my burner... I have BTC DRW-1108IM and have, had it for 10month or so.. In the beginning it worked fine. Both with DVD and CD... But not, i can burn CD and read CD.. But i cant Burn DVD.. Im trying to burn with nero 6.3 (i have tried with older and new version) same error. I have tried with different media.. (still same) And i have now tried installing windows all over. (Still same) I have also tried with different files. Both burning image, or just burn data or sound. (still same error)... And have updated the drive with latest firmware according to www.drvupdate.com My error is, that it burns fine, but only until it reaches 19% When it burns fine, its flashing orange on front.. Then when it reaches 19% it starts flashing green. And the disk spinns up.. And then it stays there for 9min. before it spit out an error.... I have copied log file, so you all can see.. And hopefully tell me what im doing wrong.. Code: cains 1A23-0097-7030-1393-4803-6544 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 11/11/2003 2:49:52 PM Nero version: 6.3.0.0 (Nero Express) Recorder: <DVDRW IDE1108> Version: B430 - HA 1 TA 1 - 6.3.0.0 Adapter driver: <IdeChnDr> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <DVDRW IDE1108 >Version: B430 - HA 1 TA 1 - 6.3.0.0 Adapter driver: <IdeChnDr> HA 1 === Scsi-Device-Map === DiskPeripheral : HDS728040PLAT20 IdeChnDr Port 1 ID 0 DMA: On CdRomPeripheral : DVDRW IDE1108 IdeChnDr Port 1 ID 1 DMA: Off DiskPeripheral : WDC WD1200BB-00DAA0 IdeChnDr Port 2 ID 0 DMA: On DiskPeripheral : HDS722512VLAT20 IdeChnDr Port 2 ID 1 DMA: Off DiskPeripheral : Promise 1+0 Stripe/RAID01.10 fasttx2k Port 3 ID 0 DMA: Off === CDRom-Device-Map === DVDRW IDE1108 F: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 511MB (523732kB) Free physical memory: 280MB (287144kB) Memory in use : 45 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 15.7.2005 Burn DVD Image 8:00:24 AM #1 Text 0 File Reader.cpp, Line 118 Reader running 8:00:24 AM #2 Text 0 File Writer.cpp, Line 124 Writer DVDRW IDE1108 running 8:00:24 AM #3 Text 0 File Burncd.cpp, Line 3094 Turn on Disc-at-once, using DVD media 8:00:51 AM #4 Text 0 File DlgWaitCD.cpp, Line 239 Last possible write address on media: 2298495 (510:46.45) Last address to be written: 2282500 (507:13.25) 8:00:51 AM #5 Text 0 File DlgWaitCD.cpp, Line 244 Write in overburning mode: FALSE 8:00:51 AM #6 Text 0 File DlgWaitCD.cpp, Line 2068 Recorder: DVDRW IDE1108, Media type: DVD-R Disc Manufacturer: RITEKG - 05 Disc Application Code: 64, Disc Physical Code: 193 8:00:51 AM #7 Text 0 File DlgWaitCD.cpp, Line 405 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW.) 8:00:51 AM #8 Text 0 File ThreadedTransferInterface.cpp, Line 779 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 2282501 (2282501) = #2282501/507:13.26 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2282501 blocks [DVDRW IDE1108 ] -------------------------------------------------------------- 8:00:51 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 948 Prepare recorder [DVDRW IDE1108 ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4674562048, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2282501 | lead-out | 1 | 0x00 | 0x41 8:00:51 AM #10 Phase 24 File dlgbrnst.cpp, Line 1800 Caching of files started 8:00:51 AM #11 Text 0 File Burncd.cpp, Line 4061 Cache writing successful. 8:00:51 AM #12 Phase 25 File dlgbrnst.cpp, Line 1800 Caching of files completed 8:00:51 AM #13 Phase 36 File dlgbrnst.cpp, Line 1800 Burn process started at 8x (11,040 KB/s) 8:00:51 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2264 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 8:00:51 AM #15 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 14:08,970 (848970ms) -> OK 8:00:51 AM #16 Text 0 File DVDR.cpp, Line 1424 Recording mode: Sequential Recording Mode 8:00:51 AM #17 Text 0 File Mmc.cpp, Line 19397 Set BUFE: Super Link -> ON 8:00:51 AM #18 Text 0 File DVDR.cpp, Line 1539 Start write address at LBA 0 DVD high compatibility mode: Yes 8:00:51 AM #19 Text 0 File Cdrdrv.cpp, Line 7912 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Media Specific: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 8:00:58 AM #20 Text 0 File Cdrdrv.cpp, Line 1276 08:00:58.206 - DVDRW IDE1108\H1 T1 : Queue again later 8:13:06 AM #21 SCSI -1135 File Cdrdrv.cpp, Line 1430 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x04280000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x06 0x67 0xC0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x0C 0x00 8:13:06 AM #22 CDR -1135 File Writer.cpp, Line 301 Write error 8:13:06 AM #23 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 8:13:07 AM #24 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 8:13:07 AM #25 Text 0 File DVDR.cpp, Line 1743 EndDAO: Last written address was 419775 8:13:07 AM #26 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 0:00,000 (0ms) -> OK 8:13:07 AM #27 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 0:00,000 (0ms) -> OK 8:13:07 AM #28 Phase 38 File dlgbrnst.cpp, Line 1800 Burn process failed at 8x (11,040 KB/s) Existing drivers: File 'Drivers\IdeChnDr.sys': Ver=2.3.0.2160, 10/01/2002, size=101431 bytes, created 10/15/2002 12:00:00 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) This is how it looks.. Hope someone can help me.. And if you need more info. Just write.. Im happy for help the help i can get.. Thanks in advance... / cains |
|  |
|
| If you can't find where you are looking for, then become a member and get an answer fast! We have thousands of people online every moment of the day to help you! Click here |
| Bookmarks |
« Previous Thread
|
Next Thread »
| Thread Tools | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Some DRW 1108IM B430 scans | H3rB3i | BTC/ Emprex Burner | 3 | 03-09-2005 20:58 |
| BTC 1108IM Firmware Recover | hddvd | BTC/ Emprex Burner | 1 | 20-03-2005 04:07 |
| CIBOX Graveur DVD 8X == BTC DRW 1108IM ? | ageha | CD and DVD Burners | 5 | 14-01-2005 12:48 |
| Firmware VB029 for DRW 1108IM is out | H3rB3i | BTC/ Emprex Burner | 0 | 10-09-2004 07:28 |
| RitekG04; BTC 1108IM vs. NEC 2500A | H3rB3i | BTC/ Emprex Burner | 5 | 04-08-2004 16:34 |
All times are GMT +2. The time now is 02:13.