please help''urgent help needed - Club CDFreaks

dvd_rw · 22-02-2004

hi,
i flashed my 1004 drive with 049 beta and it was working fine but i had problem reading some discs so i tired to flash my drive back to 043 in dos but when i was flashing the update ran and it did not run from 00% to 100 and it was stuck there for a long time. Now the drive is dead no power , no tray eject. I used the command line
mtkflash 3 w /a0 all0.hex for first file
but it doesnt go to 100 % and is stuck at 0 and therefore i cannot flash other files. Now its completly dead no light no power. Please can anyone help.
thanks,
dvd_rw

dvd_rw · 22-02-2004

hi,
ok i tried to use marcos way by using another cd rom and then switiching the cables but when i try to flash the 1004 after changing the cable it says
Err: fail to initial IDE port, please reboot PC.

Does anyone know what is this and how can i flash it otherwise.
thanks,
dvd_rw

dvd_rw · 22-02-2004

when i tried to flash this time it says

Flash type: Unknown Flash memory

very sad now..drive dead

bigguy283 · 29-02-2004

i get same error after trying to flash in dos
"fail to initial ide port please reboot"
i have tried everything i.e replacing dvdr with working cdr booting to dos, replacing cdr with dvdr while pc still on
run mtkflash "still get error"!!!!!!!!!!!!!
anyone help please my drive is 3months old only flashing it to try and get dvds that work!!!!!!!!!

22-02-2004	#1 (permalink)
dvd_rw New on Forum Join Date: Jan 2004 Posts: 20	please help''urgent help needed <a href='http://adstats.cdfreaks.com/www/delivery/ck.php?n=a13febf7&cb=INSERT_RANDOM_NUMBER_HERE' target='_blank'><img src='http://adstats.cdfreaks.com/www/delivery/avw.php?zoneid=30&cb=INSERT_RANDOM_NUMBER_HERE&n=a13febf7' border='0' alt='' /></a> hi, i flashed my 1004 drive with 049 beta and it was working fine but i had problem reading some discs so i tired to flash my drive back to 043 in dos but when i was flashing the update ran and it did not run from 00% to 100 and it was stuck there for a long time. Now the drive is dead no power , no tray eject. I used the command line mtkflash 3 w /a0 all0.hex for first file but it doesnt go to 100 % and is stuck at 0 and therefore i cannot flash other files. Now its completly dead no light no power. Please can anyone help. thanks, dvd_rw

22-02-2004	#2 (permalink)
dvd_rw New on Forum Join Date: Jan 2004 Posts: 20	ok here is what happened hi, ok i tried to use marcos way by using another cd rom and then switiching the cables but when i try to flash the 1004 after changing the cable it says Err: fail to initial IDE port, please reboot PC. Does anyone know what is this and how can i flash it otherwise. thanks, dvd_rw

22-02-2004	#3 (permalink)
dvd_rw New on Forum Join Date: Jan 2004 Posts: 20	another thing when i tried to flash this time it says Flash type: Unknown Flash memory very sad now..drive dead

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Urgent help needed please	binavijay	Nero & InCD	12	30-03-2007 14:09
URGENT HELP NEEDED! please	bluefoxtim	General Hardware Forum	2	28-09-2006 14:34
Needed Urgent Help	Hussaini	Nero SDK Discussion Forum	2	09-12-2004 17:16
Urgent!! Help Needed!!!!! :(	sen5es	LG Burner	0	30-08-2004 21:04
URGENT help needed please	romelus	General Software	1	03-01-2004 19:13

Commercial message
<a href='http://adstats.cdfreaks.com/www/delivery/ck.php?n=a5c5554b&cb=INSERT_RANDOM_NUMBER_HERE' target='_blank'><img src='http://adstats.cdfreaks.com/www/delivery/avw.php?zoneid=29&cb=INSERT_RANDOM_NUMBER_HERE&n=a5c5554b' border='0' alt='' /></a>

29-02-2004	#4 (permalink)
bigguy283 CD Freaks Rookie Join Date: Dec 2003 Posts: 49	i get same error after trying to flash in dos "fail to initial ide port please reboot" i have tried everything i.e replacing dvdr with working cdr booting to dos, replacing cdr with dvdr while pc still on run mtkflash "still get error"!!!!!!!!!!!!! anyone help please my drive is 3months old only flashing it to try and get dvds that work!!!!!!!!!