Error with 1.11 - Page 2 - Club CDFreaks

markbrown · 25-03-2003

Don:

This is a link to the dicussion thread about problems w/DVD2ONE and Raid systems.

Since I don't have a Raid system most of the discussion is greek to me. But they do mention a latency problem w/large file transfers and a latency patch for some MB's.

If DVD2ONE works when you don't use a raid drive, there might be a solution there for you

http://club.cdfreaks.com/showthread....t=dvd2one+raid

DonM · 26-03-2003

An update......

I have checked out all the other threads that mention RAID issues. The problems do not sound the same, but I am going to give it a shot anyway.

I am in the process of making enough free space on my non-RAID 20G drive. I will let you all know how it works out.

Thanks,
Don

DonM · 26-03-2003

Ok, well it does not appear to be the RAID.

I repeated the entire process on my non-RAID drive:

Ripped Apollo 13 with DVD Decrypter, file mode, all files, then transcode with DVD2one in full disk mode. Gets to 99% and I get the IFO error referenced in previous posts.

I am at a loss. I will start looking at the decryption, since there really aren't many options to mess up in DVD2one.

BTW, it took almost 10 minutes longer to transcode on the non-RAID drive.

dun4cheap · 26-03-2003

DonM, I just wanted to point something out with my experiences. Shuttle Spacewalker boards are great client end boards, usually in expensive and for the most part reliable until you start pushing them to limits. Usually this is a chipset and bios falacy where the bufferring, timings delays cause issues for video capturing, hard drive transfer speeds, memory deleays and so on. It may be a possibility that your shuttle board in general is the cause of the problem. You may consider disabling on the cache on the board and attempting this again.

Good Luck.

Dun4cheap

sreemv · 23-04-2003

I am still getting this error - although, in this particular case, I am unable to rip certain blocks [broken blocks - smartripper calls it] due to the physical damage [thank you, kid!]. I have tried DVDecryptor with the same results.

However, I am able to play the DVD in disc mode from the ripped files on the hard disc with ofcourse few blocky patches a couple of places where I suspect the blocks could not be copied.

Needless to say I want to backup whatever good blocks I have to a single DVD but DVD2One keeps giving me this error.

I have tried both 1.1.1 and 1.1.2 versions.

Malique2 · 09-05-2003

I don't have a raid system, I only have one IDE drive no raid system. So that eliminates that whole topic. There is something else going on here.

Quote:

Originally posted by markbrown
Don:

This is a link to the dicussion thread about problems w/DVD2ONE and Raid systems.

Since I don't have a Raid system most of the discussion is greek to me. But they do mention a latency problem w/large file transfers and a latency patch for some MB's.

If DVD2ONE works when you don't use a raid drive, there might be a solution there for you

http://club.cdfreaks.com/showthread....t=dvd2one+raid

rfaaez · 17-05-2003

I get the same problem here, at 99% the program crashes, just when it creates the ifos and bups, some time ago it happened the same, then, i used full disc mode instead of movie only, and worked, but in stargate R2, didn't, so i used the ifoedit metod by copying the original ifos and bups and processing again with ifoedit and it worked fine.

So i think this is not a hardware problem but some dvd2one problem handling some instrution on the ifos.

RA

mbanx · 14-05-2004

Quote:

Originally Posted by DonM

I tried another DVD, "Gladiator", ripping it with DVD Decryptor and trying to do a 1:1 copy with DVD2One. I repeated the entire process twice with the same "IFO" error at 99%. I have NOT done any preprocessing of the decrypted files before running DVD2One (version 1.11, re-downloaded 3/22/03).

My process is:
1.) Rip all files with DVD Decryptor
2.) Run DVD2One in "full disk" mode

It seems to be working for some here, but too many are having this same problem. Are we just unlucky in our choice of DVDs?

Previous versions of DVD2One worked fine for me. I was even able to do multiple sessions and extras using the various guides on this forum. So far "Last of the Mohicans" and "Gladiator" cannot be processed by DVD2One without the "IFO" error.

Renee, what is the author's perspective on this? Possible bug or user error?

Any help would be appreciated.

Don

mbanx · 14-05-2004

I am new here and am still trying to get around on this site. I have the same problem as you guys have but I am getting the "Error adjusting the IFO file" from programs that I have recorded from tv to my computer. I use Winfast PVR and have never had any problems until last night. After searching for other people with this problem it seems that they only have it with a ripped DVD so what is up with my problem trying to get it from tv.
Thanks if anyone has any help MBANX

25-03-2003	#26 (permalink)
markbrown New on Forum Join Date: Jan 2003 Posts: 9	<a href='http://adstats.cdfreaks.com/www/delivery/ck.php?n=a13febf7&cb=INSERT_RANDOM_NUMBER_HERE' target='_blank'><img src='http://adstats.cdfreaks.com/www/delivery/avw.php?zoneid=30&cb=INSERT_RANDOM_NUMBER_HERE&n=a13febf7' border='0' alt='' /></a> Don: This is a link to the dicussion thread about problems w/DVD2ONE and Raid systems. Since I don't have a Raid system most of the discussion is greek to me. But they do mention a latency problem w/large file transfers and a latency patch for some MB's. If DVD2ONE works when you don't use a raid drive, there might be a solution there for you http://club.cdfreaks.com/showthread....t=dvd2one+raid Last edited by markbrown; 25-03-2003 at 07:15.

26-03-2003	#27 (permalink)
DonM New on Forum Join Date: Feb 2003 Posts: 15	An update...... I have checked out all the other threads that mention RAID issues. The problems do not sound the same, but I am going to give it a shot anyway. I am in the process of making enough free space on my non-RAID 20G drive. I will let you all know how it works out. Thanks, Don __________________ P4 1.9 GHz 400MHz Shuttle AV40R Motherboard 2x256Mbyte Crucial 2100 DDR 2x40G WD Raid 0 (NTFS) 20G Maxtor (FAT32) ATI All-In-Wonder Radeon Windows XP Pro SP1 DVD Decryptor v 3.1.4.0 Dvd20ne v1.1.1 Rip Drive LG GCC-4120B Burn Drive Pioneer DVR-105 Norton Antivirus Nero Express

26-03-2003	#28 (permalink)
DonM New on Forum Join Date: Feb 2003 Posts: 15	Ok, well it does not appear to be the RAID. I repeated the entire process on my non-RAID drive: Ripped Apollo 13 with DVD Decrypter, file mode, all files, then transcode with DVD2one in full disk mode. Gets to 99% and I get the IFO error referenced in previous posts. I am at a loss. I will start looking at the decryption, since there really aren't many options to mess up in DVD2one. BTW, it took almost 10 minutes longer to transcode on the non-RAID drive. __________________ P4 1.9 GHz 400MHz Shuttle AV40R Motherboard 2x256Mbyte Crucial 2100 DDR 2x40G WD Raid 0 (NTFS) 20G Maxtor (FAT32) ATI All-In-Wonder Radeon Windows XP Pro SP1 DVD Decryptor v 3.1.4.0 Dvd20ne v1.1.1 Rip Drive LG GCC-4120B Burn Drive Pioneer DVR-105 Norton Antivirus Nero Express

17-05-2003	#32 (permalink)
rfaaez New on Forum Join Date: May 2003 Posts: 1	Same here....99% crash I get the same problem here, at 99% the program crashes, just when it creates the ifos and bups, some time ago it happened the same, then, i used full disc mode instead of movie only, and worked, but in stargate R2, didn't, so i used the ifoedit metod by copying the original ifos and bups and processing again with ifoedit and it worked fine. So i think this is not a hardware problem but some dvd2one problem handling some instrution on the ifos. RA

14-05-2004	#34 (permalink)
mbanx New on Forum Join Date: May 2004 Posts: 2	Re: Error with 1.11 I am new here and am still trying to get around on this site. I have the same problem as you guys have but I am getting the "Error adjusting the IFO file" from programs that I have recorded from tv to my computer. I use Winfast PVR and have never had any problems until last night. After searching for other people with this problem it seems that they only have it with a ripped DVD so what is up with my problem trying to get it from tv. Thanks if anyone has any help MBANX

Commercial message
<a href='http://adstats.cdfreaks.com/www/delivery/ck.php?n=a5c5554b&cb=INSERT_RANDOM_NUMBER_HERE' target='_blank'><img src='http://adstats.cdfreaks.com/www/delivery/avw.php?zoneid=29&cb=INSERT_RANDOM_NUMBER_HERE&n=a5c5554b' border='0' alt='' /></a>

26-03-2003	#29 (permalink)
dun4cheap CD Freaks Junior Member Join Date: Jan 2003 Posts: 81	DonM, I just wanted to point something out with my experiences. Shuttle Spacewalker boards are great client end boards, usually in expensive and for the most part reliable until you start pushing them to limits. Usually this is a chipset and bios falacy where the bufferring, timings delays cause issues for video capturing, hard drive transfer speeds, memory deleays and so on. It may be a possibility that your shuttle board in general is the cause of the problem. You may consider disabling on the cache on the board and attempting this again. Good Luck. Dun4cheap

23-04-2003	#30 (permalink)
sreemv New on Forum Join Date: Mar 2003 Posts: 3	I am still getting this error - although, in this particular case, I am unable to rip certain blocks [broken blocks - smartripper calls it] due to the physical damage [thank you, kid!]. I have tried DVDecryptor with the same results. However, I am able to play the DVD in disc mode from the ripped files on the hard disc with ofcourse few blocky patches a couple of places where I suspect the blocks could not be copied. Needless to say I want to backup whatever good blocks I have to a single DVD but DVD2One keeps giving me this error. I have tried both 1.1.1 and 1.1.2 versions.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Write 9 11 W2 Error	haden_4	CloneDVD	0	22-05-2006 21:02
Error Writedvd 11 5 W2	angello	CloneDVD	3	09-10-2005 14:21
WriteDVD 11 2 error?	sm4rtie	CloneDVD	1	03-05-2004 16:49
CloneDVD .... Error: WriteDVD 11 5	flaviano	CloneDVD	7	16-03-2004 21:17
Error: WriteDVD 11 5	intristin	CloneDVD	0	07-02-2004 10:11