Crash with the latest CloneDVD version 1.3.11.2 - Club CDFreaks

Georgekouk · 26-01-2004

I have a serious problem with the latest version. When the conversion starts, after a few seconds the computer reboots. This particular problem does not happen with the version 1.2.84 which I am currently using. Any help is welcome.

Configuration:

Windows XP SP1
Athlon XP 2400+
KT 266a based motherboard
256 MB DDR Ram
DVD+-R/RW TEAC W50D
DVDROm Liteon 165H
CDR/RW Liteon 24102b
Hard Disk 60 GB WD ATA 100 5400rpm
Creative Blaster Geforce3 Ti 200
SB Live Player 5.1

lyle · 27-01-2004

Are you using AnyDVD to rip the copy protection off?

I had this problem a few months ago and what fixed it for me was checking the "safe mode" box in AnyDVD. The problem was not in CloneDVD.

Of course, if you're not using AnyDVD, then never mind.

*Olli* · 27-01-2004

> I have a serious problem with the latest version. When the conversion starts, after a few seconds the computer reboots. This particular problem does not happen with the version 1.2.84 which I am currently using. Any help is welcome. <

I could bet that you are using VIA or NVidia IDE drivers. Both have a tendency to be more or less broken (more or less - depending on their version number). Please try the drivers which came with XP instead.

Georgekouk · 27-01-2004

Thanks both for your immediate answer. I will check your solutions and I will reply soon.

Georgekouk · 05-02-2004

Thanks Olli,

Complete Success. Not only it solved my clonedvd issue but it also allowed me to install the newest nvidia drivers for my Geforce3 Ti 200 from Creative. In the past all I was getting whenever I tried to install them was system unable to boot.

Thanks again!!!!!

*Olli* · 05-02-2004

Quote:

Originally posted by Georgekouk
Thanks Olli,

Complete Success. Not only it solved my clonedvd issue but it also allowed me to install the newest nvidia drivers for my Geforce3 Ti 200 from Creative. In the past all I was getting whenever I tried to install them was system unable to boot.

Thanks again!!!!!

Could someone from the forum moderators please put it somewhere in the FAQs, or better as banner in this forum ... "whenever you have any computer trouble, headaches, sour stomach, an ugly wife, a dead cat, ... uninstall your Busmaster IDE driver crap!"

Chessmonster2 · 05-02-2004

Where exactly and how do you remove those drivers?

*Olli* · 06-02-2004

Quote:

Originally posted by Chessmonster2
Where exactly and how do you remove those drivers?

This question is not so easy to answer, depending on which chipset / driver pair is installed.
Most have a (more or less working) uninstall option...
Or you can pick the Microsoft IDE drivers in Windows device manager.

Schnauze · 06-02-2004

The newer busmaster drivers can be found in the system properties -> software.

If you uninstall them there and reboot, windows will automatically use the standard drivers.

If you have a nforce board, some onboard components like LAN and audio may not work anymore after reboot. Just install the nforce driver again. Without the S/W busmaster, of course.

Jarod666 · 06-02-2004

About these driver-problems:
If I look into my Device-Manager and then the properties (Driver-Details) of each IDE-Port, there are only 2 entries.

IDE 1 & 2:
c:\windows\system32\Drivers\atapi.sys
c:\windows\system32\storprop.dll

And the IDE UDMA-Controller shows only:
c:\windows\system32\Drivers\siside.sys

You guessed right, its a SIS-Board. :-)

My question is, are these entries correct or do I have a problem, because, everytime I burn a DVD, the harddisk with the transcoded movie on it begins to work very hard (Maxtor 200GB UDMA6) and my system becomes very slow then.

Jarod

26-01-2004	#1 (permalink)
Georgekouk New on Forum Join Date: Jan 2004 Posts: 0	Crash with the latest CloneDVD version 1.3.11.2 <a href='http://adstats.cdfreaks.com/www/delivery/ck.php?n=a13febf7&cb=INSERT_RANDOM_NUMBER_HERE' target='_blank'><img src='http://adstats.cdfreaks.com/www/delivery/avw.php?zoneid=30&cb=INSERT_RANDOM_NUMBER_HERE&n=a13febf7' border='0' alt='' /></a> I have a serious problem with the latest version. When the conversion starts, after a few seconds the computer reboots. This particular problem does not happen with the version 1.2.84 which I am currently using. Any help is welcome. Configuration: Windows XP SP1 Athlon XP 2400+ KT 266a based motherboard 256 MB DDR Ram DVD+-R/RW TEAC W50D DVDROm Liteon 165H CDR/RW Liteon 24102b Hard Disk 60 GB WD ATA 100 5400rpm Creative Blaster Geforce3 Ti 200 SB Live Player 5.1 Last edited by Georgekouk; 26-01-2004 at 19:08.

27-01-2004	#3 (permalink)
Olli Original author of CloneCD and CloneDVD Author Join Date: Feb 2000 Location: Switzerland Posts: 2,087	> I have a serious problem with the latest version. When the conversion starts, after a few seconds the computer reboots. This particular problem does not happen with the version 1.2.84 which I am currently using. Any help is welcome. < I could bet that you are using VIA or NVidia IDE drivers. Both have a tendency to be more or less broken (more or less - depending on their version number). Please try the drivers which came with XP instead. __________________ Note: All opinions expressed in this post are my personal opinion and do not represent Elaborate Bytes AG or anyone else.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CloneDVD Mobile - crash resulting in XP not rebooting	nschoeggl	CloneDVD	1	24-12-2006 04:07
Lost CloneDVD in comp crash	buzzkutt	CloneDVD	7	04-07-2006 15:00
Nero latest version and Roxio latest??	Cleary	Newbie Forum	10	24-03-2005 16:39
CloneDVD Version 1.3.11.2	kunolobo	CloneDVD	0	06-11-2003 17:29
version 1.11 crash at 99%	Indo	DVD2One	16	25-03-2003 23:35

Commercial message
<a href='http://adstats.cdfreaks.com/www/delivery/ck.php?n=a5c5554b&cb=INSERT_RANDOM_NUMBER_HERE' target='_blank'><img src='http://adstats.cdfreaks.com/www/delivery/avw.php?zoneid=29&cb=INSERT_RANDOM_NUMBER_HERE&n=a5c5554b' border='0' alt='' /></a>

27-01-2004	#2 (permalink)
lyle New on Forum Join Date: Nov 2003 Location: Brooklyn Park MN Posts: 8	Are you using AnyDVD to rip the copy protection off? I had this problem a few months ago and what fixed it for me was checking the "safe mode" box in AnyDVD. The problem was not in CloneDVD. Of course, if you're not using AnyDVD, then never mind.

27-01-2004	#4 (permalink)
Georgekouk New on Forum Join Date: Jan 2004 Posts: 0	Thanks both for your immediate answer. I will check your solutions and I will reply soon.

05-02-2004	#5 (permalink)
Georgekouk New on Forum Join Date: Jan 2004 Posts: 0	Thanks Olli, Complete Success. Not only it solved my clonedvd issue but it also allowed me to install the newest nvidia drivers for my Geforce3 Ti 200 from Creative. In the past all I was getting whenever I tried to install them was system unable to boot. Thanks again!!!!!

05-02-2004	#7 (permalink)
Chessmonster2 New on Forum Join Date: Jan 2004 Posts: 6	Where exactly and how do you remove those drivers?

06-02-2004	#9 (permalink)
Schnauze CD Freaks Junior Member Join Date: Jul 2003 Location: Germany Posts: 95	The newer busmaster drivers can be found in the system properties -> software. If you uninstall them there and reboot, windows will automatically use the standard drivers. If you have a nforce board, some onboard components like LAN and audio may not work anymore after reboot. Just install the nforce driver again. Without the S/W busmaster, of course.

06-02-2004	#10 (permalink)
Jarod666 CD Freaks Junior Member Join Date: Mar 2000 Location: Germany Posts: 96	About these driver-problems: If I look into my Device-Manager and then the properties (Driver-Details) of each IDE-Port, there are only 2 entries. IDE 1 & 2: c:\windows\system32\Drivers\atapi.sys c:\windows\system32\storprop.dll And the IDE UDMA-Controller shows only: c:\windows\system32\Drivers\siside.sys You guessed right, its a SIS-Board. :-) My question is, are these entries correct or do I have a problem, because, everytime I burn a DVD, the harddisk with the transcoded movie on it begins to work very hard (Maxtor 200GB UDMA6) and my system becomes very slow then. Jarod