Go Back   Club CDFreaks - Knowledge is Power > International Chat: Software related > Copy Movie > CloneDVD


Commercial message



CloneDVD Discuss, Clone DVD 2...Error.. at Copy Movie forum; Hi folks.. Just got a problem so i was wondering if any of you guy's can help? Ive burnt loads of avi and mpeg films to dvd using VSO DIVXtoDVD and DVD SANTA and ive had no problem what so ever..I think their one of the best programs


Reply
 
Thread Tools
Old 05-10-2005   #1 (permalink)
New on Forum
 
Danny G's Avatar
 
Join Date: Oct 2005
Posts: 15
Clone DVD 2...Error..

Hi folks..

Just got a problem so i was wondering if any of you guy's can help?

Ive burnt loads of avi and mpeg films to dvd using VSO DIVXtoDVD and DVD SANTA and ive had no problem what so ever..I think their one of the best programs to use..Anyway I want to back up a copy of the green mile but this film is about 3 and a bit hours long.I used ANYDVD and CLONEDVD2 and I even looked at the Guides you have on the forum..So following the guide i done every thing step by step and every thing was going ok after the ripping or wat ever it was doing it said replace media with blank media or somthing like that so done that and it began to write and after about 20% its siad "Error bad media" so i took the disk out and replaced it with a new one..(the disks are called RIVISION and i use em all the time) and tryed again but the same thing happend again.Can some one give me any help on this matter...Thanks alot Danny G

P.S sorry if this post is in the wong place
Danny G is offline   Reply With Quote
Old 05-10-2005   #2 (permalink)
CDFreaks Resident
 
bjkg's Avatar
 
Join Date: Jan 2003
Posts: 2,737
Re: Clone DVD 2...Error..

@ Danny G,

To ensure that you are using the latest versions of the AnyDVD- CloneDVD software programs visit SlySoft (http://www.slysoft.com) and download the latest version of AnyDVD-CloneDVD. To prevent any confusion suggest stating the versions of AnyDVD-CloneDVD when posting at the Forum.

Stating that you are using RIVISION blank DVD media does not describe the actual blank DVD Media you are using. To fully describe the blank DVD Media you are using you need to provide the Manufacture ID and Media Code (Example: RitekG05) of your blank DVD Media.

Also please provide the Manufacture Name, Model Number, and Firmware version of your DVD Burner.

To obtain the above requested information of your DVD Burner and DVD Media suggest using a software utility similar to DVD Info (http://www.dvdinfopro.com).

Also please provide the exact error notification you receive when you experience your problem.

It appears that possibly you are experiencing incompatibility between your DVD Burner and DVD Media. Providing the above requested information will help to determine if your problem is in fact a DVD Burner/DVD Media incompatibility issue.

Best Regards,
bjkg
bjkg is online now   Reply With Quote
Old 06-10-2005   #3 (permalink)
New on Forum
 
Danny G's Avatar
 
Join Date: Oct 2005
Posts: 15
Re: Clone DVD 2...Error..

Quote:
Originally Posted by bjkg
@ Danny G,

To ensure that you are using the latest versions of the AnyDVD- CloneDVD software programs visit SlySoft (http://www.slysoft.com) and download the latest version of AnyDVD-CloneDVD. To prevent any confusion suggest stating the versions of AnyDVD-CloneDVD when posting at the Forum.

Stating that you are using RIVISION blank DVD media does not describe the actual blank DVD Media you are using. To fully describe the blank DVD Media you are using you need to provide the Manufacture ID and Media Code (Example: RitekG05) of your blank DVD Media.

Also please provide the Manufacture Name, Model Number, and Firmware version of your DVD Burner.

To obtain the above requested information of your DVD Burner and DVD Media suggest using a software utility similar to DVD Info (http://www.dvdinfopro.com).

Also please provide the exact error notification you receive when you experience your problem.

It appears that possibly you are experiencing incompatibility between your DVD Burner and DVD Media. Providing the above requested information will help to determine if your problem is in fact a DVD Burner/DVD Media incompatibility issue.

Best Regards,
bjkg

Thanks BJKG...

Ive done it now i used dvd shrink that worked fine and it was easy...But i'll remember that what you just said in the futuer

THANKS
Danny G is offline   Reply With Quote
Old 06-10-2005   #4 (permalink)
CDFreaks Resident
 
itzbinnice's Avatar
 
Join Date: Feb 2002
Location: New York
Posts: 1,145
Re: Clone DVD 2...Error..

Quote:
Originally Posted by Danny G
Thanks BJKG...

Ive done it now i used dvd shrink that worked fine and it was easy...But i'll remember that what you just said in the futuer

THANKS
What have you done? You didn't post the media as requested and used Shrink instead of CloneDVD. If Shrink worked that's all well in good, but I suggest you attempt to get to the root of your problem. I had no problem backing up The Green Mile, as lengthy as it is, by using the current versions at the time of Clone and AnyDVD. It was Region 1, is this the Region you were attempting to burn?

I'm not saying Shrink is a bad program, and I'm glad you got your back up,
however, in my opinion the CloneDVD and AnyDVD combination are second to none and work superbly.

I have never heard of Rivision media, but I'm willing to bet it is low quality media you are using. You must supply media code as bjkj requested for a proper evaluation to be made. If you want to take the guesswork out of what may be causing DVD burning problems, you can eliminate one phase, use quality media only. The cheap disk you burned today and played nicely on your stand alone player, may not play at all 6 months from now as many can attest to. The choice is yours, as they say, " you can pay me now, or pay me later".
itzbinnice is offline   Reply With Quote
 
Reply


If you can't find where you are looking for, then become a member and get an answer fast! We have thousands of people online every moment of the day to help you! Click here



Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Error with clone dvd Brookin CloneDVD 1 13-11-2006 21:47
Error Reading with Clone DVD ozdrew CloneDVD 5 08-02-2004 21:42
clone error dvd manager TheSurgeon CloneDVD 2 09-01-2004 14:33
Clone DVD Error Hazlo CloneDVD 5 17-10-2003 01:20
Clone Dvd error 5 5 mcathor CloneDVD 3 17-09-2003 01:01


All times are GMT +2. The time now is 21:34.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.1.0