GameJack 5 ... just got it, and pulled my hair out trying to solve this config problem.

This post will have a lot of informaton about my system, so that people can go ahead and approach the problem.

First, the attachment dxdiag.txt. As you can see, I am using SP2.

Secondly, the problem. I repeated and verified these steps in order to reproduce the problem.

1) Start gj5.exe to install 5.0.3.1
2) Clicked "English", then "OK"
3) Clicked through setup, specified program location, then Finished setup
4) Launched GameJack.exe
5) Clicked "Demo Version" on the trial screen
6) Went to "Driver Configuration"
7) Under "Use Driver", selected "GameJack 5"
8) Program closes, a msi dialog with the title "Universal SCSI Controller" pops up, and disappears in under a second. There is no further attempt to launch the program automatically.
9) Opened up program again. Clicked "Demo Version" on the trial screen
10) The msi dialog pops up for a split second, and then GameJack crashes with exception 0xc0000005 offset 021ba25f.

I then checked the events log under Administrative Tools. The following appeared before the crash:

--- event 1

Event Type: Information
Event Source: MsiInstaller
Event Category: None
Event ID: 11708
Date: 5/23/2005
Time: 9:09:50 PM
User: SERVER-XP\Jim
Computer: SERVER-XP
Description:
Product: Universal SCSI Controller -- Installation operation failed.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 7b 33 35 41 35 30 31 41 {35A501A
0008: 44 2d 43 35 33 38 2d 34 D-C538-4
0010: 32 38 36 2d 39 41 34 35 286-9A45
0018: 2d 41 41 46 35 35 31 34 -AAF5514
0020: 41 34 38 32 44 7d A482D}

-- event 2

Event Type: Information
Event Source: MsiInstaller
Event Category: None
Event ID: 11708
Date: 5/23/2005
Time: 9:09:57 PM
User: SERVER-XP\Jim
Computer: SERVER-XP
Description:
Product: Universal SCSI Controller -- Installation operation failed.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 7b 33 35 41 35 30 31 41 {35A501A
0008: 44 2d 43 35 33 38 2d 34 D-C538-4
0010: 32 38 36 2d 39 41 34 35 286-9A45
0018: 2d 41 41 46 35 35 31 34 -AAF5514
0020: 41 34 38 32 44 7d A482D}




-- the crash is texted as follows:

Event Type: Error
Event Source: Application Error
Event Category: None
Event ID: 1000
Date: 5/23/2005
Time: 9:09:57 PM
User: N/A
Computer: SERVER-XP
Description:
Faulting application gamejack.exe, version 5.0.3.1, faulting module unknown, version 0.0.0.0, fault address 0x029fa25f.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 41 70 70 6c 69 63 61 74 Applicat
0008: 69 6f 6e 20 46 61 69 6c ion Fail
0010: 75 72 65 20 20 67 61 6d ure gam
0018: 65 6a 61 63 6b 2e 65 78 ejack.ex
0020: 65 20 35 2e 30 2e 33 2e e 5.0.3.
0028: 31 20 69 6e 20 75 6e 6b 1 in unk
0030: 6e 6f 77 6e 20 30 2e 30 nown 0.0
0038: 2e 30 2e 30 20 61 74 20 .0.0 at
0040: 6f 66 66 73 65 74 20 30 offset 0
0048: 32 39 66 61 32 35 66 0d 29fa25f.
0050: 0a .


I have tried the following to no success:

Removed Alcohol 120 and Daemon Tools
Reinstalled gamejack.exe
Cleaned the registry using a variety of cleaners found on google.com

This works with my Windows Server 2003 setup on my laptop, which is nowhere as clean. I had just completed a fresh install of SP2 on this computer, upgrading from the CD straight to SP2.



Please help!!

More information. I tried launching unidrv.msi in the GameJack 5 folder, and this message popped up:

"Installation Incomplete"

"The installer was interrupted before Universal SCSI Controller could be installed. You need to restart the installer to try again."

I did not interact with the setup in any other way other than opening the file.

Hi, i have exactly the same problem. I contacted the program support, but no answer at all.

If you have an AMD64 cpu open your boot.ini and change the entry

/NoExecute=OptIn to /NoExecute=AlwaysOff

and reboot.

Then reinstall the msi file from your gamejack folder and the installation should work.

After installing the file change the boot.ini entry back to /NoExecute=OptIn

Hi all,
I just got GameJack 5 and, I don't have a clue where to start.
I'm completely new at this stuff, so I would appreciate someone taking me through the step by step process of using the program.
Thanks in advance.
Wallace Tait.
Onraio, Canada

Where did u get this GameJack 5 from?

I have SP2 and my GameJack 5 works 100%
Try a different download sorce

I have the exact same problem - I got my file from the official homepage and I still can't install the bugger Does anyone have any idea about what could cause it? All other software installs without problems - Alcohol, daemon tools, you name it. It's just Gamejack that acts weird...