Lite-On LTR-16101B & WinOnCD 3.8PE - Club CDFreaks

Garyx · 15-11-2001

Does anyone know if the Lite-On LTR-16101B works fully with WinOnCD 3.8PE SR-2? The LiteOn site does not list WinOnCD as being compatible with it.

*Smart@$$* · 15-11-2001

Read the Rules please..crossposting is NOT allowed:
http://nbf.cdfreaks.com/showthread.php?threadid=37437

And you should not check the LiteOn site to see if your burner is compatible with certain software, but on the site of the software manufacturer whether your burner is supported...

WinOnCD has been taken over by Roxio and that is where you should have a look.

Garyx · 15-11-2001

Thanks for the reply. I posted on the H/W and S/W because the issue is related to both and someone reading only one of those groups may have the answer.

I have already checked the Roxio sites in both English and German and alo www.cequadrat.de , however, there are no details for WinOnCD supported drives. Hence my question(s) here.

*Smart@$$* · 15-11-2001

Quote:

Originally posted by Garyx
Thanks for the reply. I posted on the H/W and S/W because the issue is related to both and someone reading only one of those groups may have the answer.

It is not a matter of why you posted it in two sections, but simply the fact that you did. To prevent scattered discussions in two different fora, same things said twice, there was setup this rule that crossposting is not allowed....(you can rightfully assume that the rules they havce in this board are here for a reason and someone has actually thought about it before setting up these rules).

To get back at your question, as that is the reason you posted on this board...I was able to search that site and come up with an update for your writer...at least, that is what the page says:
http://www.cequadrat.com/driver/3.x/mmc_292_2.exe

And the page I found it on:
http://www.roxio.de/english/support/drv_user.php3?f=1

Hope it works for you!

Garyx · 15-11-2001

Hey, thanks for finding this. I really appreciate it.

15-11-2001	#1 (permalink)
Garyx New on Forum Join Date: Nov 2001 Posts: 4	Lite-On LTR-16101B & WinOnCD 3.8PE Does anyone know if the Lite-On LTR-16101B works fully with WinOnCD 3.8PE SR-2? The LiteOn site does not list WinOnCD as being compatible with it.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
problem with LTR-16101B	Joystick	LiteOn / PLDS/ Sony Burner	7	03-10-2003 04:00
LTR-16101B 90-99mins CDR Problems	Pupu	LiteOn / PLDS/ Sony Burner	4	06-05-2003 09:21
Can't detect LTR-16101B	mekoo	LiteOn / PLDS/ Sony Burner	1	23-11-2002 05:51
Firmware update / Lite-On LTR-16101B Problemen!!	Phalcon	Dutch: De Woonkamer	1	15-08-2001 23:57
Cdrwin & LITE-ON LTR-16101B	Phalcon	Dutch: De Woonkamer	6	08-08-2001 21:01

Today
CD Freaks	__________________ This advertising will not be shown to registered members. Register your free account today and become a member on Club CD Freaks - Knowledge is Power

15-11-2001	#2 (permalink)
Smart@$$ Newbie Join Date: Aug 1999 Posts: 1,117	Read the Rules please..crossposting is NOT allowed: http://nbf.cdfreaks.com/showthread.php?threadid=37437 And you should not check the LiteOn site to see if your burner is compatible with certain software, but on the site of the software manufacturer whether your burner is supported... WinOnCD has been taken over by Roxio and that is where you should have a look.

15-11-2001	#3 (permalink)
Garyx New on Forum Join Date: Nov 2001 Posts: 4	Thanks for the reply. I posted on the H/W and S/W because the issue is related to both and someone reading only one of those groups may have the answer. I have already checked the Roxio sites in both English and German and alo www.cequadrat.de , however, there are no details for WinOnCD supported drives. Hence my question(s) here.

15-11-2001	#5 (permalink)
Garyx New on Forum Join Date: Nov 2001 Posts: 4	Hey, thanks for finding this. I really appreciate it.

Commercial ads