Burning dvds freeze at 1% + nero error message - Club CDFreaks

Gudgee · 21-09-2005

I upgraded my motherboard recently, havn't had a chance to do any burning since then. The burning was working fine beforehand.

The other day I started backing some files up, I do all my burns at 8x with +R media, usually with Nero 6.6.0.13, on a BenQ 1620.

I insterted a blank dvd, the drive didn't recognise it. What gives? So I ejected it and tried again, this time it picked it up.

I'm fairly sure that burn went ok, but the second dvd that I tried to burn was slow (took about 30min to burn and authenticate rather than 15 or so), and there were burn errors, big chunks of 50-100 sectors.

Restarted the computer with a bit of success; half a dozen burns without dramas. Then the same problem, randomly slowed down burn speed, errors when checking.

When this happens, the bar will get stuck at 1% for a few minutes, make some ab-normal spinning noises (like stuttering, rather than just building up speed as normal burns do). After a few minutes it'll start the burning (at a slower speed ofcourse), with the clock ticking down like normal. When it reaches about 25% complete, the timer will say 0:00 burn time left...

This has happened about 5 times now, losing too many dvds. I have also checked to make sure the drive is still Ultra DMA 2 when this happens, and it is.

After this happens twice in a row, nero wont even start the burn, it'll come up with a couple of errors just after the "bitsetting set to drive default" message.

Hopefully someone has an idea about what I can do, below is the error message incase anyone understands them.

Thanks

Code:

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programs\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 6:35:34 PM 
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c

Recorder:             <BENQ DVD DD DW1620>      Version: B7S9 - HA 1 TA 1 - 6.6.0.13
 Adapter driver:      <atapi>                   HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ATAPI 
CD-ROM:               <JLMS     XJ-HD166S       >Version: DS0F - HA 1 TA 0 - 6.6.0.13
 Adapter driver:      <atapi>                   HA 1

=== Scsi-Device-Map ===
DiskPeripheral       : ST3200826A                       atapi Port 0 ID 0  DMA: On 
CdRomPeripheral      : JLMS XJ-HD166S                   atapi Port 1 ID 0  DMA: On 
CdRomPeripheral      : BENQ DVD DD DW1620               atapi Port 1 ID 1  DMA: On 

=== CDRom-Device-Map ===
JLMS XJ-HD166S             D:   CDRom0
BENQ DVD DD DW1620         E:   CDRom1
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 511MB (523760kB)
Free physical memory: 170MB (174872kB)
Memory in use       : 66 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

21.9.2005
ISO compilation
8:36:55 PM	#1 Text 0 File Isodoc.cpp, Line 6194
	Iso document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate                : FALSE
	Write                   : TRUE
	Finalize CD             : TRUE
	Multisession            : FALSE
	Burning mode            : DAO
	Mode                    : 1
	ISO Level               : 1 (Max. of 11 = 8 + 3 char)
	Character set           : ISO 9660
	Joliet                  : TRUE
	Allow pathdepth more than 8 directories : TRUE
	Allow more than 255 characters in path  : TRUE
	Write ISO9660 ;1 file extensions        : TRUE
	
8:36:55 PM	#2 Text 0 File Reader.cpp, Line 127
	Reader running
	
8:36:55 PM	#3 Text 0 File Writer.cpp, Line 122
	Writer BENQ     DVD DD DW1620    running
	
8:36:55 PM	#4 ISO9660GEN -11 File geniso.cpp, Line 3293
	First writeable address = 0 (0x00000000)
	
8:36:55 PM	#5 Text 0 File Burncd.cpp, Line 3167
	Turn on Disc-At-Once, using DVD media
	
8:36:55 PM	#6 Text 0 File DlgWaitCD.cpp, Line 260
	Last possible write address on media:  2295103 (510:01.28, 4482MB)
	Last address to be written:            1785503 (396:46.53, 3487MB)
	
8:36:55 PM	#7 Text 0 File DlgWaitCD.cpp, Line 272
	Write in overburning mode: NO (enabled: CD)
	
8:36:55 PM	#8 Text 0 File DlgWaitCD.cpp, Line 2339
	Recorder: BENQ DVD DD DW1620, Media type: DVD+R
	
8:36:55 PM	#9 Text 0 File DlgWaitCD.cpp, Line 438
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
8:36:55 PM	#10 Text 0 File ThreadedTransferInterface.cpp, Line 830
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 ()
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 1785504 (1785504) = #1785504/396:46.54
	    relocatable, disc pos for caching/writing not required/ required, no patch infos
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1785504 blocks [BENQ     DVD DD DW1620]
	--------------------------------------------------------------
	
8:36:55 PM	#11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
	Prepare recorder [BENQ     DVD DD DW1620] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    3656712192, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
	       0 |  lead-in |   0 |    0x41 | 0x00
	       0 |        1 |   0 |    0x41 | 0x00
	       0 |        1 |   1 |    0x41 | 0x00
	 1785504 | lead-out |   1 |    0x41 | 0x00
	
8:36:55 PM	#12 Phase 24 File dlgbrnst.cpp, Line 1832
	Caching of files started
	
8:36:55 PM	#13 Text 0 File Burncd.cpp, Line 4051
	Cache writing successful.
	
8:36:55 PM	#14 Phase 25 File dlgbrnst.cpp, Line 1832
	Caching of files completed
	
8:36:55 PM	#15 Phase 36 File dlgbrnst.cpp, Line 1832
	Burn process started at 8x (11,080 KB/s)
	
8:36:55 PM	#16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
8:36:55 PM	#17 SCSI -1066 File Cdrdrv.cpp, Line 1182
	SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x04500600
	Status:     0x04 (0x01, SCSI_ERR)
	HA-Status   0x00 (0x00, OK)
	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
	Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
	Sense Code: 0x24
	Sense Qual: 0x00
	CDB Data:   0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 
	Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 
	            0x00 0x00 0x00 0x00 0x24 0x00 
	
8:36:56 PM	#18 CDR -1207 File DVDR.cpp, Line 4786
	Book Type automatically set to: Current recorder setting
	
8:36:56 PM	#19 Text 0 File DVDPlusRW.cpp, Line 652
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
8:36:56 PM	#20 WINPFILE 2 File winpfile.cpp, Line 274
	The system cannot find the file specified.

	C:\DOCUME~1\Yim\LOCALS~1\Temp\NERF4520029.avi
	
8:37:26 PM	#21 SCSI -1176 File Cdrdrv.cpp, Line 1436
	SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x04070000
	Status:     0x04 (0x01, SCSI_ERR)
	HA-Status   0x00 (0x00, OK)
	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
	Sense Key:  0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x72
	Sense Qual: 0x01
	CDB Data:   0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 
	Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12 
	            0x00 0x00 0x00 0x00 0x72 0x01 
	
8:37:26 PM	#22 CDR -1176 File Writer.cpp, Line 311
	Session fixation error
	
8:37:26 PM	#23 Text 0 File ThreadedTransfer.cpp, Line 228
	all writers idle, stopping conversion
	
8:37:26 PM	#24 Text 0 File ThreadedTransfer.cpp, Line 222
	conversion idle, stopping reader
	
8:37:27 PM	#25 SCSI -1176 File Cdrdrv.cpp, Line 1182
	SCSI Exec, HA 1, TA 1, LUN 0
	Status:     0x04 (0x01, SCSI_ERR)
	HA-Status   0x00 (0x00, OK)
	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
	Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
	Sense Code: 0x72
	Sense Qual: 0x03
	CDB Data:   0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 
	Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 
	            0x00 0x00 0x00 0x00 0x72 0x03 
	
8:37:27 PM	#26 Phase 127 File dlgbrnst.cpp, Line 1832
	Generating DVD high compatibility borders
	
8:37:27 PM	#27 Phase 129 File dlgbrnst.cpp, Line 1832
	Generating DVD borders completed successfully
	
8:37:27 PM	#28 Phase 38 File dlgbrnst.cpp, Line 1832
	Burn process failed at 8x (11,080 KB/s)
	

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12/03/2005 8:28:13 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 3/08/2004 10:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

*_chef_* · 21-09-2005

Quote:

8:36:56 PM #20 WINPFILE 2 File winpfile.cpp, Line 274
The system cannot find the file specified.

C:\DOCUME~1\Yim\LOCALS~1\Temp\NERF4520029.avi

8:37:26 PM #21 SCSI -1176 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x04070000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x72
Sense Qual: 0x01
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x72 0x01

8:37:26 PM #22 CDR -1176 File Writer.cpp, Line 311
Session fixation error

Maybe updating to 6.6.0.16 could help, but posting it in the BENQ section would give you probably better answers...

*rdgrimes* · 21-09-2005

Assuming your drive is connected via the MB IDE controller, what driver is in use? If it's anything other than the default MS driver, (Standard Dual Channel PCI IDE Controller), then change it to that. This certainly looks like a driver conflict.

Gudgee · 21-09-2005

Connected to the secondary channel of the secondary IDE controller...

Pics below.

I also have the 2nd log of the burns, its different again to the "cannot find file"

Code:

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programs\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 6:35:34 PM 
 Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c

Recorder:             <BENQ DVD DD DW1620>      Version: B7S9 - HA 1 TA 1 - 6.6.0.13
 Adapter driver:      <atapi>                   HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ATAPI 
CD-ROM:               <JLMS     XJ-HD166S       >Version: DS0F - HA 1 TA 0 - 6.6.0.13
 Adapter driver:      <atapi>                   HA 1

=== Scsi-Device-Map ===
DiskPeripheral       : ST3200826A                       atapi Port 0 ID 0  DMA: On 
CdRomPeripheral      : JLMS XJ-HD166S                   atapi Port 1 ID 0  DMA: On 
CdRomPeripheral      : BENQ DVD DD DW1620               atapi Port 1 ID 1  DMA: On 

=== CDRom-Device-Map ===
JLMS XJ-HD166S             D:   CDRom0
BENQ DVD DD DW1620         E:   CDRom1
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 511MB (523760kB)
Free physical memory: 171MB (176104kB)
Memory in use       : 66 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

21.9.2005
ISO compilation
8:44:40 PM	#1 Text 0 File Isodoc.cpp, Line 6194
	Iso document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate                : FALSE
	Write                   : TRUE
	Finalize CD             : TRUE
	Multisession            : FALSE
	Burning mode            : DAO
	Mode                    : 1
	ISO Level               : 1 (Max. of 11 = 8 + 3 char)
	Character set           : ISO 9660
	Joliet                  : TRUE
	Allow pathdepth more than 8 directories : TRUE
	Allow more than 255 characters in path  : TRUE
	Write ISO9660 ;1 file extensions        : TRUE
	
8:44:40 PM	#2 Text 0 File Reader.cpp, Line 127
	Reader running
	
8:44:40 PM	#3 Text 0 File Writer.cpp, Line 122
	Writer BENQ     DVD DD DW1620    running
	
8:44:40 PM	#4 ISO9660GEN -11 File geniso.cpp, Line 3293
	First writeable address = 0 (0x00000000)
	
8:44:40 PM	#5 Text 0 File Burncd.cpp, Line 3167
	Turn on Disc-At-Once, using DVD media
	
8:44:40 PM	#6 Text 0 File DlgWaitCD.cpp, Line 260
	Last possible write address on media:  2295103 (510:01.28, 4482MB)
	Last address to be written:            1785503 (396:46.53, 3487MB)
	
8:44:40 PM	#7 Text 0 File DlgWaitCD.cpp, Line 272
	Write in overburning mode: NO (enabled: CD)
	
8:44:40 PM	#8 Text 0 File DlgWaitCD.cpp, Line 2339
	Recorder: BENQ DVD DD DW1620, Media type: DVD+R
	
8:44:40 PM	#9 Text 0 File DlgWaitCD.cpp, Line 438
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
8:44:40 PM	#10 Text 0 File ThreadedTransferInterface.cpp, Line 830
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 ()
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 1785504 (1785504) = #1785504/396:46.54
	    relocatable, disc pos for caching/writing not required/ required, no patch infos
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1785504 blocks [BENQ     DVD DD DW1620]
	--------------------------------------------------------------
	
8:44:40 PM	#11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
	Prepare recorder [BENQ     DVD DD DW1620] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    3656712192, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
	       0 |  lead-in |   0 |    0x41 | 0x00
	       0 |        1 |   0 |    0x41 | 0x00
	       0 |        1 |   1 |    0x41 | 0x00
	 1785504 | lead-out |   1 |    0x41 | 0x00
	
8:44:40 PM	#12 Phase 24 File dlgbrnst.cpp, Line 1832
	Caching of files started
	
8:44:41 PM	#13 Text 0 File Burncd.cpp, Line 4051
	Cache writing successful.
	
8:44:41 PM	#14 Phase 25 File dlgbrnst.cpp, Line 1832
	Caching of files completed
	
8:44:41 PM	#15 Phase 36 File dlgbrnst.cpp, Line 1832
	Burn process started at 8x (11,080 KB/s)
	
8:44:41 PM	#16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
8:44:41 PM	#17 SCSI -1066 File Cdrdrv.cpp, Line 1182
	SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x04500600
	Status:     0x04 (0x01, SCSI_ERR)
	HA-Status   0x00 (0x00, OK)
	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
	Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
	Sense Code: 0x24
	Sense Qual: 0x00
	CDB Data:   0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 
	Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 
	            0x00 0x00 0x00 0x00 0x24 0x00 
	
8:44:41 PM	#18 CDR -1207 File DVDR.cpp, Line 4786
	Book Type automatically set to: Current recorder setting
	
8:44:41 PM	#19 Text 0 File DVDPlusRW.cpp, Line 652
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
8:45:47 PM	#20 SCSI -1176 File Cdrdrv.cpp, Line 1436
	SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x037A0000
	Status:     0x04 (0x01, SCSI_ERR)
	HA-Status   0x00 (0x00, OK)
	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
	Sense Key:  0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x72
	Sense Qual: 0x01
	CDB Data:   0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 
	Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12 
	            0x00 0x00 0x00 0x00 0x72 0x01 
	
8:45:47 PM	#21 CDR -1176 File Writer.cpp, Line 311
	Session fixation error
	
8:45:47 PM	#22 Text 0 File ThreadedTransfer.cpp, Line 228
	all writers idle, stopping conversion
	
8:45:47 PM	#23 Text 0 File ThreadedTransfer.cpp, Line 222
	conversion idle, stopping reader
	
8:45:47 PM	#24 SCSI -1176 File Cdrdrv.cpp, Line 1182
	SCSI Exec, HA 1, TA 1, LUN 0
	Status:     0x04 (0x01, SCSI_ERR)
	HA-Status   0x00 (0x00, OK)
	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
	Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
	Sense Code: 0x72
	Sense Qual: 0x03
	CDB Data:   0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 
	Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 
	            0x00 0x00 0x00 0x00 0x72 0x03 
	
8:45:47 PM	#25 Phase 127 File dlgbrnst.cpp, Line 1832
	Generating DVD high compatibility borders
	
8:45:47 PM	#26 Phase 129 File dlgbrnst.cpp, Line 1832
	Generating DVD borders completed successfully
	
8:45:47 PM	#27 Phase 38 File dlgbrnst.cpp, Line 1832
	Burn process failed at 8x (11,080 KB/s)
	

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12/03/2005 8:28:13 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 3/08/2004 10:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

*rdgrimes* · 21-09-2005

Right Click on the "VIA Busmaster" entry under the IDE controller, select update driver on the driver pane, then direct it to display a list of known drivers. Choose the "Standard Dual Channel PCI-IDE controller".
Then reboot and confirm it has been installed.

Gudgee · 22-09-2005

I have since done some more testing, uninstalling Nero, using dvd decrypter to burn, changing the IDE controllers. I still have the problems.

I made a thread over in the BenQ area, I'm a little more descriptive now because I've tried a few more things.
http://club.cdfreaks.com/showthread.php?t=149975

*rdgrimes* · 22-09-2005

Unless you remove the VIA IDE controller driver, you're wasting your time troubleshooting anything else. Start with the basics.

Gudgee · 22-09-2005

I changed to the one you suggested before, that didn't help.

If I uninstall the controller and reboot it'll just install the original one again.

Theres not that much I can do with the IDE controller before I run out of options there.

*rdgrimes* · 22-09-2005

Go to add/remove programs and look for the VIA busmaster driver. If you find it there, uninstall that. I'm 75% sure that this driver is the source of your trouble.

Gudgee · 23-09-2005

Ok, drivers arn't installed in the add/remove programs area.

But if i go to device manager I can select which driver to install. I've tried the normal one that windows wants to use ( the MS one I beleive ), i've tried the Standard dual channel like you suggested, still problems.

About to try the VIA one, but this doesn't seem to be helping any.

Gudgee · 23-09-2005

Thanks for the responses, but I think its hardware related now.

A couple of hours ago I went back to do some more testing, the drive wouldn't even open, and when I tried to eject the drive from My Computer, the computer would freeze up.

Figuring it was more likely hardware with this information I swapped drives with my friend. His drive burnt 4 disk's fine in my computer, and my drive started up fine in his, but once we tried to burn something it froze up and we were un-able to eject the media.

Will have to send it back I guess. Thanks for the help.

21-09-2005	#3 (permalink)
rdgrimes Retired Moderator Join Date: Jun 2002 Location: Deadwood Posts: 11,449	Re: Burning dvds freeze at 1% + nero error message Assuming your drive is connected via the MB IDE controller, what driver is in use? If it's anything other than the default MS driver, (Standard Dual Channel PCI IDE Controller), then change it to that. This certainly looks like a driver conflict.

21-09-2005	#5 (permalink)
rdgrimes Retired Moderator Join Date: Jun 2002 Location: Deadwood Posts: 11,449	Re: Burning dvds freeze at 1% + nero error message Right Click on the "VIA Busmaster" entry under the IDE controller, select update driver on the driver pane, then direct it to display a list of known drivers. Choose the "Standard Dual Channel PCI-IDE controller". Then reboot and confirm it has been installed.

22-09-2005	#6 (permalink)
Gudgee CD Freaks Rookie Join Date: May 2005 Posts: 45	Re: Burning dvds freeze at 1% + nero error message I have since done some more testing, uninstalling Nero, using dvd decrypter to burn, changing the IDE controllers. I still have the problems. I made a thread over in the BenQ area, I'm a little more descriptive now because I've tried a few more things. http://club.cdfreaks.com/showthread.php?t=149975

22-09-2005	#7 (permalink)
rdgrimes Retired Moderator Join Date: Jun 2002 Location: Deadwood Posts: 11,449	Re: Burning dvds freeze at 1% + nero error message Unless you remove the VIA IDE controller driver, you're wasting your time troubleshooting anything else. Start with the basics.

22-09-2005	#8 (permalink)
Gudgee CD Freaks Rookie Join Date: May 2005 Posts: 45	Re: Burning dvds freeze at 1% + nero error message I changed to the one you suggested before, that didn't help. If I uninstall the controller and reboot it'll just install the original one again. Theres not that much I can do with the IDE controller before I run out of options there.

Commercial message
<a href='http://adstats.cdfreaks.com/www/delivery/ck.php?n=a5c5554b&cb=INSERT_RANDOM_NUMBER_HERE' target='_blank'><img src='http://adstats.cdfreaks.com/www/delivery/avw.php?zoneid=29&cb=INSERT_RANDOM_NUMBER_HERE&n=a5c5554b' border='0' alt='' /></a>

22-09-2005	#9 (permalink)
rdgrimes Retired Moderator Join Date: Jun 2002 Location: Deadwood Posts: 11,449	Re: Burning dvds freeze at 1% + nero error message Go to add/remove programs and look for the VIA busmaster driver. If you find it there, uninstall that. I'm 75% sure that this driver is the source of your trouble.

23-09-2005	#10 (permalink)
Gudgee CD Freaks Rookie Join Date: May 2005 Posts: 45	Re: Burning dvds freeze at 1% + nero error message Ok, drivers arn't installed in the add/remove programs area. But if i go to device manager I can select which driver to install. I've tried the normal one that windows wants to use ( the MS one I beleive ), i've tried the Standard dual channel like you suggested, still problems. About to try the VIA one, but this doesn't seem to be helping any.

23-09-2005	#11 (permalink)
Gudgee CD Freaks Rookie Join Date: May 2005 Posts: 45	Re: Burning dvds freeze at 1% + nero error message Thanks for the responses, but I think its hardware related now. A couple of hours ago I went back to do some more testing, the drive wouldn't even open, and when I tried to eject the drive from My Computer, the computer would freeze up. Figuring it was more likely hardware with this information I swapped drives with my friend. His drive burnt 4 disk's fine in my computer, and my drive started up fine in his, but once we tried to burn something it froze up and we were un-able to eject the media. Will have to send it back I guess. Thanks for the help.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
nero dvd frame freeze when burning	rockingroom	Nero & InCD	1	12-02-2007 02:26
Nero Error in burning DVDs viz Unable to create disc structure & KEY_ILLEGAL_REQUEST	shafling	Burning Software	2	05-01-2007 19:44
Nero 7 Illegal cd error message While burning.	g0dblissyou	Newbie Forum	0	29-12-2005 00:46
Nero Error Message During Recode Burning	Cousin Chris	Nero & InCD	0	05-11-2005 17:35
Nero freeze at 100% while burning dvd's	EsspeN	Nero & InCD	3	06-08-2004 17:21