Blindwrite is unable to write to cd ?? - Club CDFreaks

bongo4009 · 13-06-2003

i try to copy a cd using blindwrite.
blindread is no problem, but i am not able to blindwrite back to cd.
here is the logfile:

***----- Image verification started -----***
HD image is OK
Sector: Bad headers 20 - Bad Edc 14 - Weak 0 - Status 0
File systems: Volumes 2 - files 94 - folders 42
Volume size 434216 boot 0 Vol ID WillyFlug - 24.08.01 12:19:09 Status 1
***----- Image verification ended -----***
Microsoft Windows 98 SE
Patin-couffin version 11 in use
Blindwrite Version 4.4.0.65
***----- CD DEVICE INFO START OF REPORT -----***
Cd Unit report started at 12.06.03 18:46:40
----------------------------------------------------------
VendorID : "PLEXTOR"
UnitId : "CD-R PX-W4220T"
FwID : ""
FwDate : "1.04"
Drivers : 00000000/00000000/0000000000000014
Speeds : 20/4/2/0
Bsize : 2048
Flags : 00000
----------------------------------------------------------
end of CD Unit report
***----- CD DEVICE INFO END OF REPORT -----***
Unit 0:0:0 - PLEXTOR CD-R PX-W4220T 1.04
Speed x1
VolumeId : "WILLYFLUG"
Hash : D76E735FCD38514E7E8F69C639D9DCDD8CB07878
HD image "WILLYFLUG.BWT"
Writing mode : SAO COOKED
Set speed to 0 kbps failed : Code 05 24 00 [Illegal request, Invalid field in CDB]
MMC Write error reported at sector -150 : Code 05 24 00 [Illegal request, Invalid field in CDB]
Cache synchronization failed : Code 02 04 01 [NOT READY, in process of becoming ready]
Sectors read : 1914
Sectors built: 150
CD is incomplete

when using DAO PW instead, the recorder does not even start burning.

using aspi instad of pattin-couffin does no change.

i also tried another cd recorder (cyberdrive602):
this one refuses to burn in SAO mode.
it seems to burn in DAP PQ mode, but the resulting cd is not readable.

what's going wrong?

thanks
tino

*Portmac* · 13-06-2003

This I believe is your main problem

Sector: Bad headers 20 - Bad Edc 14

Its should say: Bad Headers 0, and the 14 Edc errors wouldnt help much but shouldnt stop it from burning.
You should make a new image and try again.

bongo4009 · 13-06-2003

i think the

Sector: Bad headers 20 - Bad Edc 14

is the copy protection.
i also created an image with another cd drive, which reports the same errors.
i think there should be a way to write the disk anyway.
tino

13-06-2003	#1 (permalink)
bongo4009 New on Forum Join Date: Jun 2003 Posts: 2	Blindwrite is unable to write to cd ?? <a href='http://adstats.cdfreaks.com/www/delivery/ck.php?n=a13febf7&cb=INSERT_RANDOM_NUMBER_HERE' target='_blank'><img src='http://adstats.cdfreaks.com/www/delivery/avw.php?zoneid=30&cb=INSERT_RANDOM_NUMBER_HERE&n=a13febf7' border='0' alt='' /></a> i try to copy a cd using blindwrite. blindread is no problem, but i am not able to blindwrite back to cd. here is the logfile: *----- Image verification started -----* HD image is OK Sector: Bad headers 20 - Bad Edc 14 - Weak 0 - Status 0 File systems: Volumes 2 - files 94 - folders 42 Volume size 434216 boot 0 Vol ID WillyFlug - 24.08.01 12:19:09 Status 1 *----- Image verification ended -----* Microsoft Windows 98 SE Patin-couffin version 11 in use Blindwrite Version 4.4.0.65 *----- CD DEVICE INFO START OF REPORT -----* Cd Unit report started at 12.06.03 18:46:40 ---------------------------------------------------------- VendorID : "PLEXTOR" UnitId : "CD-R PX-W4220T" FwID : "" FwDate : "1.04" Drivers : 00000000/00000000/0000000000000014 Speeds : 20/4/2/0 Bsize : 2048 Flags : 00000 ---------------------------------------------------------- end of CD Unit report *----- CD DEVICE INFO END OF REPORT -----* Unit 0:0:0 - PLEXTOR CD-R PX-W4220T 1.04 Speed x1 VolumeId : "WILLYFLUG" Hash : D76E735FCD38514E7E8F69C639D9DCDD8CB07878 HD image "WILLYFLUG.BWT" Writing mode : SAO COOKED Set speed to 0 kbps failed : Code 05 24 00 [Illegal request, Invalid field in CDB] MMC Write error reported at sector -150 : Code 05 24 00 [Illegal request, Invalid field in CDB] Cache synchronization failed : Code 02 04 01 [NOT READY, in process of becoming ready] Sectors read : 1914 Sectors built: 150 CD is incomplete when using DAO PW instead, the recorder does not even start burning. using aspi instad of pattin-couffin does no change. i also tried another cd recorder (cyberdrive602): this one refuses to burn in SAO mode. it seems to burn in DAP PQ mode, but the resulting cd is not readable. what's going wrong? thanks tino

13-06-2003	#2 (permalink)
Portmac CD Freaks VIP Join Date: Apr 2002 Location: Upside Wombles Head Posts: 1,270	Re: Blindwrite is unable to write to cd ?? This I believe is your main problem Sector: Bad headers 20 - Bad Edc 14 Its should say: Bad Headers 0, and the 14 Edc errors wouldnt help much but shouldnt stop it from burning. You should make a new image and try again. __________________ Games Protection List is back up. BlindWrite 6 Guide Don't worry....Everything is getting nicely out of control. *The CDFreaks Forum Rules*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Shattered Union - Blindwrite bad instructions = bad write job on CD	Fuerza	Copy Protection	1	02-11-2005 05:17
DVD Burner unable to read/write CD-R but reads/writes fine to DVD -/+R	dskyze	CD and DVD Burners	3	10-11-2004 18:02
Unable to write to CD-RW with Direct CD	garytn9988	Nero & InCD	0	27-09-2004 18:18
BTC 1004IM unable to read DVD (and write CD) anymore	Claus	BTC/ Emprex Burner	1	01-12-2003 19:15
blindwrite 4.3.0.31 can 't write cd-text > bug???	buffy	VSO Software	2	16-03-2003 20:17

Commercial message
<a href='http://adstats.cdfreaks.com/www/delivery/ck.php?n=a5c5554b&cb=INSERT_RANDOM_NUMBER_HERE' target='_blank'><img src='http://adstats.cdfreaks.com/www/delivery/avw.php?zoneid=29&cb=INSERT_RANDOM_NUMBER_HERE&n=a5c5554b' border='0' alt='' /></a>

13-06-2003	#3 (permalink)
bongo4009 New on Forum Join Date: Jun 2003 Posts: 2	i think the Sector: Bad headers 20 - Bad Edc 14 is the copy protection. i also created an image with another cd drive, which reports the same errors. i think there should be a way to write the disk anyway. tino