Hi, well I'm not new to burning data onto cds, but recently upon making a backup of a piece of software I've encountered problems in burning the image of the file, which was made in mdf format when ripped off the cd (e.g. used alcohol to make the image). I can mount this image, but whenever I try to burn it I get a cd that can not be used, when installing the data and inserting this cd (which happens to be the 2nd cd required for the installation) it gives me an error, which I attribute to the burning of this cd.
When I test the image of the cd with winrar (testing the archives in the image after mounting it), I don't get any problems. But after burning it and testing these archives I get an error - so there is definately something wrong with the cd once it is burnt.
When I try to burn the cd with Alcohol 120% I get the following error log:
Code:
########################### Options Setting ###########################
Devices control interface: Default Driver Control Interface
CPU Priority Level: High
Memory Buffer Size (MB): 102
Examine the accuracy of data read from physical device: Yes
Turn off "Auto-Select best write speed" function if possible: No
Overburn disc(s): No
Fill memory buffer before recording discs: Yes
Ignore Media Type: Yes
RMPS (Recordable Media Physical Signature) Emulation: No
BAD Sectors Emulation: No
Sub-Channel Data Fixed & Emulation: No
Laserlock Emulation: No
Current Language: English
############################ Device(s) List ############################
(F:) HP CD-Writer+ 9100 (atapi, Port 1, Bus 0, Target 1, Lun 0)
(D:) SB3205S UDQ406E (dtscsi, Port 2, Bus 0, Target 0, Lun 0)
(G:) AXV CD/DVD-ROM (a347scsi, Port 3, Bus 0, Target 0, Lun 0)
##################### Installed Device Drivers List #####################
a347bus.sys a347scsi.sys ACPI.sys afd.sys amdk7.sys
ati2cqag.dll ati2dvag.dll ati2mtag.sys ati3duag.dll atikvmag.dll
ativvaxx.dll audstub.sys Beep.SYS BOOTVID.dll Cdfs.SYS
Cdr4_xp.SYS Cdralw2k.SYS cdrom.sys CLASSPNP.SYS cmuda.sys
disk.sys dmio.sys dmload.sys drmk.sys dtscsi.sys
dump_atapi.sys dump_WMILIB.SYS Dxapi.sys dxg.sys dxgthk.sys
ElbyCDFL.sys ElbyCDIO.sys Fastfat.sys fdc.sys Fips.SYS
flpydisk.sys Fs_Rec.SYS ftdisk.sys gameenum.sys hal.dll
hwpsgt.sys i8042prt.sys imapi.sys ipnat.sys ipsec.sys
isapnp.sys kbdclass.sys KDCOM.DLL ks.sys KSecDD.sys
lemsgt.sys mnmdd.SYS mouclass.sys MountMgr.sys mrxdav.sys
mrxsmb.sys Msfs.SYS msgpc.sys msmpu401.sys Mup.sys
NAVENG.Sys NavEx15.Sys NDIS.sys ndistapi.sys ndiswan.sys
NDProxy.SYS netbios.sys netbt.sys netrcacm.sys Npfs.SYS
ntdll.dll ntoskrnl.exe Null.SYS nwlnkipx.sys nwlnknb.sys
nwlnkspx.sys parport.sys PartMgr.sys ParVdm.SYS PcAtip.sys
pci.sys pciide.sys PCIIDEX.SYS Pcouffin.sys portcls.sys
prodrv06.sys prohlp02.sys psched.sys ptilink.sys rasacd.sys
rasl2tp.sys raspppoe.sys raspptp.sys raspti.sys rdbss.sys
RDPCDD.sys rdpdr.sys redbook.sys SAVRT.SYS SAVRTPEL.SYS
SCSIPORT.SYS SECDRV.SYS serenum.sys serial.sys sfhlp01.sys
SISAGPX.sys SPBBCDrv.sys sptd.sys SPTD1341.SYS sr.sys
srv.sys swenum.sys SYMDNS.SYS SYMEVENT.SYS SYMFW.SYS
SYMIDS.SYS symidsco.sys symlcbrd.sys SYMNDIS.SYS SYMREDRV.SYS
SYMTDI.SYS sysaudio.sys tcpip.sys TDI.SYS termdd.sys
update.sys USBD.SYS usbhub.sys usbohci.sys USBPORT.SYS
vga.sys VIDEOPRT.SYS VolSnap.sys vsdatant.sys wanarp.sys
watchdog.sys wdmaud.sys win32k.sys WMILIB.SYS
################## Detailed Information of Device(s) ##################
///////////////////////////////////////////////////////////////////////
(F:) HP CD-Writer+ 9100(1:1) detail information.
///////////////////////////////////////////////////////////////////////
Vendor Identification: HP
Product Identification: CD-Writer+ 9100
Production Revision Level: 1.0c
Location: atapi, Port 1, Bus 0, Target 1, Lun 0
Support recording method: DAO, RAW SAO, RAW SAO+SUB, RAW DAO(96), TAO
BURN-Free Technology: Not Supported
Auto-Select best write speed: Not Supported
-* Note: This information below is provided by the unit, it might be inaccurate. *-
-* This software does not use this information! *-
Removable media: Yes
Version: ATAPI (INF-8090i/INF-8020i/INF-8028i)
Response Data Format: 01h
CD-R Read/Write: Yes/Yes
CD-RW Read/Write: Yes/Yes
Read CD-R Fixed Packet: Yes
Test Write: Yes
DVD-ROM Read: No
DVD-R Read/Write: No/No
DVD-RAM Read/Write: No/No
Audio Play: Yes
Composite Audio and Video Data Stream: No
Digital output (IEC958) on port 1 Supported: No
Digital output (IEC958) on port 2 Supported: No
Mode 1 Form 2: Yes
Mode 2 Form 2: Yes
Multi-Session: Yes
BUF: No
CD-DA Commands supported: Yes
CD-DA Stream is Accurate: Yes
R-W Supported: No
R-W De-interleaved and Corrected: No
C2 Pointers Support: No
ISRC Supported: Yes
UPC Supported: Yes
Read Bar Code: No
Lock media into the drive: Yes
Currently drive Lock state: Unlocked
Prevent Jumper: No
Eject Command: Yes
Separate volume levels: Yes
Separate channel mute: Yes
Changer Supports Disc Present: No
Software slot selection: No
Side change capable: No
P through W in Lead-In: Yes
*** Disc ATIP code information ***
ATIP Start Time of Lead-in: 97m15s17f
ATIP Last possible start time of Lead-out: 79m59s70f (LBA: 359995)
Disc Manufacturer: Ritek Co.
Disc Dye: PhthaloCyanine Material
Disc type: CD-R
Media Sub-Type: 02h
Indicative Target Write Power: 04h
Reference Speed: 00h
Unrestricated Use Disc(URU): 00h
A1 Value: 000000h
A2 Value: 000000h
A3 Value: 000000h
Maximum Read Speed Supported (with current disc): 32X (4800 KB/Sec)
Maximum Write Speed Supported (with current Disc): 8X (1200 KB/Sec)
Current Read Speed Supported (with current Disc): 20X (3000 KB/Sec)
Current Write Speed Supported (with current Disc): 8X (1200 KB/Sec)
///////////////////////////////////////////////////////////////////////
(D:) SB3205S UDQ406E(2:0) detail information.
///////////////////////////////////////////////////////////////////////
Vendor Identification: SB3205S
Product Identification: UDQ406E
Production Revision Level: 1.0
Location: dtscsi, Port 2, Bus 0, Target 0, Lun 0
-* Note: This information below is provided by the unit, it might be inaccurate. *-
-* This software does not use this information! *-
Removable media: Yes
Version: ANSI X3.131:1994 (SCSI-2)
Response Data Format: 02h
CD-R Read/Write: Yes/No
CD-RW Read/Write: Yes/No
Read CD-R Fixed Packet: Yes
Test Write: No
DVD-ROM Read: Yes
DVD-R Read/Write: Yes/No
DVD-RAM Read/Write: Yes/No
Audio Play: Yes
Composite Audio and Video Data Stream: No
Digital output (IEC958) on port 1 Supported: Yes
Digital output (IEC958) on port 2 Supported: No
Mode 1 Form 2: Yes
Mode 2 Form 2: Yes
Multi-Session: Yes
BUF: No
CD-DA Commands supported: Yes
CD-DA Stream is Accurate: Yes
R-W Supported: Yes
R-W De-interleaved and Corrected: Yes
C2 Pointers Support: Yes
ISRC Supported: Yes
UPC Supported: Yes
Read Bar Code: No
Lock media into the drive: Yes
Currently drive Lock state: Unlocked
Prevent Jumper: No
Eject Command: Yes
Separate volume levels: No
Separate channel mute: No
Changer Supports Disc Present: No
Software slot selection: No
Side change capable: No
P through W in Lead-In: No
Maximum Read Speed Supported (with current disc): 32X (4800 KB/Sec)
Current Read Speed Supported (with current Disc): 32X (4800 KB/Sec)
#######################################################################
###################### Source Disc/Image Information ######################
Type: Media Descriptor Image file
Path: E:\nmw\nmw.mds
nmw.mdf
Size: 801.95 MB
Session: 1
Track: 1
Session 01:
Track 01: Mode 1, Length: 357527(698.3 MB), Address: 000000
#############################################################################
####################### Dumping/Recording Progress Log #######################
00:49:34 Processor info: AMD Duron(tm) Processor (1294MHz)
00:49:34 Memory Available to Windows: 261,616 KB
00:49:34 Not enough Memory! Adjust memory buffer size to 73 MB.
00:49:34 Image file loading: E:\nmw\nmw.mds
00:49:34 Source Info: Session: 1, Track: 1, Length: 698.3 MB / 079:27:02
00:49:39 (F:) HP CD-Writer+ 9100(1:1): Recording Method/Speed
00:49:39 Simulated recording - RAW DAO - 8X (1200 KB/Sec)
(F:) HP CD-Writer+ 9100(1:1): RAW DAO Write Mode - RAW-PW(96)
00:51:34 (F:) HP CD-Writer+ 9100(1:1) - [Write ERROR] LBA: 51184, Length: 16 S:KEY - 03/0C/09 - "Write Error - Loss Of Streaming"
00:51:35 (F:) HP CD-Writer+ 9100(1:1): Recording failed!
00:51:35 Error message: [03/0C/09] - Write Error - Loss Of Streaming
00:51:35 (F:) HP CD-Writer+ 9100(1:1): Simulated recording failed!
00:51:35 Image file loading aborted!
############################################################################## I've tried increasing the options within alcohol 120 to 128mb but it keeps saying the not enough memory message when simulation, hopefully someone can help me.
I've tried simulating with
nero as well and I get an error too, but it's not as descriptive as Alcohol.
29-11-2005
Similar Threads