Go Back   Club CDFreaks - Knowledge is Power > International Chat: Hardware related > CD and DVD Burners


Commercial message

CD and DVD Burners Finding a DVD burner is a tough job, and solving problems is even tougher. Discuss DVD recording hardware in the CD Freaks DVD burner forum. Questions about a CD burner are also welcome here.



Reply
 
Thread Tools
Old 06-04-2005   #1 (permalink)
New on Forum
 
Join Date: Oct 2003
Posts: 12
problem reading Japanese burned DVD

my friend from Japan recorded some episodes of Japanese TV onto a DVD-R using a DVD recorder that attaches to his TV (no computers involved here). of course, they dont play on my R1 DVD player, for whatever reason, but what actually concerns me is that the discs appear to have no files on them. despite the fact that i can easily see that something has been recorded to the disc by physically looking at the bottom of it, when i insert it in my DVD-ROM, windows reports that its empty. i even switched my DVD-ROM to region 2 to see if that made a difference, despite the fact that i wasnt yet trying to play any video from it, and it still had no files. my friend claims that it his recorder works fine for recording and viewing his recroded shows. since i have no region 2 or recording hardware at all, i have a few questions:

-should i be able to see any files on the DVD with my DVD-ROM, if not why? is it a regional thing or related to the method of its authoring?

-if the DVD wasnt authored by a corporation, wouldnt it be ALL region anyway?

any answers or additional instight is greatly appreciated. thank you
borat is offline   Reply With Quote
Old 06-04-2005   #2 (permalink)
TL0
CDFreaks Resident
 
Join Date: Sep 2002
Posts: 1,178
Re: problem reading Japanese burned DVD

Quote:
Originally Posted by borat
my friend from Japan recorded some episodes of Japanese TV onto a DVD-R using a DVD recorder that attaches to his TV (no computers involved here).
Sounds like your friend may have forgotten to finalize the discs, try it in a DVD burner.
TL0 is offline   Reply With Quote
Old 11-04-2005   #3 (permalink)
New on Forum
 
Join Date: Oct 2003
Posts: 12
Re: problem reading Japanese burned DVD

update:

alright, i went to another computer with a burner and with nero, and it can see that theres media there and can see the tracks as well as the amount of data, but i still have no way of seeing any kind of file system. for some reason, i made an image of the DVD then burned the image to a new DVD-R, but all it did was make another disc with invisible data..... any ideas on where i should go from here?

i tried opening the recorded DVD as if it was a multisession, and Nero 6 asked me which track i wanted it to continue the session on, but none of the 3 tracks were selectable and therefore the OK button was always greyed out and i couldnt go on.

again, any input would be greatly appreciated... thanks
borat is offline   Reply With Quote
Old 11-04-2005   #4 (permalink)
CDFreaks Resident
 
_chef_'s Avatar
 
Join Date: Aug 2004
Location: @FX labs .de ...watching [Benders.Big.Score] [Tripping.The.Rift.The.Movie]
Posts: 23,944
Re: problem reading Japanese burned DVD

You'd need some kind of DVD VR- software.
__________________
Started with burning capable optical drives (CD-R) in 1997.
Bought optical drives from AOpen, HP, LiteOn, NEC, Philips, Pioneer, Plextor, Ricoh, Samsung, Sanyo, Toshiba and Yamaha.

'Things are now in motion that cannot be undone.' [Gandalf, LoTR]

Enable DMA with micrAp$0ft Enable DMA free at your will busTRACE => Upper/Lower Filters Util
DevCon
***HOW TO ... Delete the Upper & Lower Filters!***

If you expect help then please start by using the powerful SEARCH.
_chef_ is offline   Reply With Quote
Old 12-04-2005   #5 (permalink)
New on Forum
 
Join Date: Oct 2003
Posts: 12
Re: problem reading Japanese burned DVD

Quote:
Originally Posted by _chef_
You'd need some kind of DVD VR- software.
can anyone suggest a good example that would surely allow me to accomplish this??
borat is offline   Reply With Quote
Old 12-04-2005   #6 (permalink)
CDFreaks Resident
 
dicer's Avatar
 
Join Date: Jun 2004
Location: Melbourne, Australia
Posts: 718
Re: problem reading Japanese burned DVD

try iso buster to read specific sessions. www.smart-projects.net/isobuster/
dicer is offline   Reply With Quote
Old 15-04-2005   #7 (permalink)
New on Forum
 
Join Date: Oct 2003
Posts: 12
Re: problem reading Japanese burned DVD

i gave isobuster a try when i last had access to a pc with a burner (before you mentioned it dicer), and it basically gave me the same info that nero did, showed me the tracks, how much data they had, starting points, etc. isobuster did however give me options similar to those in the attached image. the image itself is actually me at my dvd-burnerless comp trying to imitate the situation. when i was at the burner comp, should i have extracted the User or RAW data??? would either of those have given me usable files??? i didnt have much faith in the situation at that point and chose not to pursue any of those avenues.....

thanks again for any insight, people
Attached Images
File Type: jpg isobuster.jpg (55.2 KB, 46 views)
borat is offline   Reply With Quote
Old 17-04-2005   #8 (permalink)
New on Forum
 
Join Date: Oct 2003
Posts: 12
Re: problem reading Japanese burned DVD

bump
borat is offline   Reply With Quote
Old 17-04-2005   #9 (permalink)
CD Freaks Member
 
Join Date: Aug 2004
Posts: 147
Re: problem reading Japanese burned DVD

Under Track in isobuster you didnt see ISO or UDF? Clicking on either of these would have given you a list of files. Always worked on any disk I've tried including screwed up/unfinalised VR and packet written and even disks where the burn failed midway.

ISObuster has never failed me on any disk which is physically readable, if the data is there you can get it. If the disk is poor quality or very badly burnt then you can probably kiss the data goodbye.

Obviously try the disk in another drive if possible (with isobuster too).
__________________
Current Burners : Philips DVR-1640P (flashed to Benq DW1620), Liteon LH-18A1P, Liteon LH-20A1P, 2 x BENQ DW1650 (1 OEM and 1 retail).
Gathering Dust: LG GSA-H22L, LG GSA-4163B and an assortment of various CD-Writer and "Combo" drives.

Still sad at the virtual demise of Benq..

Yep, I'm still called a DVD-FREAK!
Prototype is offline   Reply With Quote
Old 21-04-2005   #10 (permalink)
New on Forum
 
Join Date: Oct 2003
Posts: 12
Re: problem reading Japanese burned DVD

well, ive tried using isobuster a bit more, but i cant seem to get anything from the disc.... i tried to "scan for file system" and "scan for UDF" or something along those lines, but got nothing. maybe its me, maybe its not, but i know something's there and it seems it could be easier.

you see, i scanned 1 of the discs with Infinidyne's CD/DVD Diagnostic and it turned up 3 VOBs without a hitch. great! however, i was using the shareware version which only allows scanning, no copying of the data....

therefore, im looking for a program similar to that, preferably freeware if possible, that can recover the data from my unfinalised DVDs.

normally, i'd just keep at it with isobuster, since im not a noob, but im using a computer at a net cafe, which means i have to pay for the time i spend on it, and while im waiting for the crappy 4x DVD burner to scan sector after sector (in other words, waiting forever), i have to sit there and stare at it. which is why i want something more guaranteed before i go back to that darn place.

thanks
borat is offline   Reply With Quote
Old 21-04-2005   #11 (permalink)
New on Forum
 
Join Date: Oct 2003
Posts: 12
Re: problem reading Japanese burned DVD

bump
borat is offline   Reply With Quote
 
Reply

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem reading DVD-R burned at limit speed nmc76ar Newbie Forum 2 21-08-2007 21:28
Problem Reading a Burned DVD on a PC?? K. Woo Burning Software 1 24-02-2007 12:39
Problem reading burned dvd-r's on my combo drive apsk121 CD and DVD Burners 3 09-11-2004 02:49
Problem reading burned dvd-r's on my combo drive apsk121 General Hardware Forum 0 08-11-2004 11:20
Problem Reading TDK 4x dvd+r after burned in 708a setorock Plextor Burner 10 08-02-2004 06:02


All times are GMT +2. The time now is 21:21.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.1.0