Nero CD speed - Club CDFreaks

cezium · 28-08-2002

Why doesn't nero cd speed work for me have just tried with my new lite-on 40x12x48x and I just get error 052602, which means PARAMETER VALUE INVALID, but whats that??? Any driver or something forgotten? I have aspi driver from nero installed

*Mr. Belvedere* · 28-08-2002

Could we have some more hardware specs ?

Tried it in safe mode ?

cezium · 29-08-2002

nope haven't done that.
system specs win2k with sp2. epox 8kha+ with latest via 4-in-1 and via bus master utility. connected to secondary ide-connector master with no slave. firmware is zs0j and cdspeed 0.85e beta. harddrives on primary is one maxtor and one ibm. drive is running in dma mode 2 with 80-pin cable

cezium · 01-09-2002

just tried the new version 1.0 same problem except that it now does a spin-up then report error. anyonw know why?

JimHom · 06-09-2002

Below is a reply to my DMA - WinXP problem and it not only solve my DMA problem, but the same problem that you have - (052602)
error. Of course, I'm assuming that you have Win XP. My 40125S
is using firmware ZSON.

"Go under device manager and ide controllers. Go into the ide ata/atpi controllers section. Delete all of the entries (should be 3 of them). Do not worry, you will not hurt anything.

After deleting the ide controllers--the ata controller and the 2 ide channels. Goto to action and scan for new hardware. This will reset your ide controller and should fix your problem. Furthermore, do not install the latest ata controller from intel site, as this will not allow you to set your mode, the option is no longer there.

If you did install the ata controller from intel, by deleting and scanning for new hardware, you will get the choice of which version to install. You WANT the driver dated 7/01/2001 version 5.1.2600.0 which came with Windows XP installation. the publisher is Microsoft Windows XP Publisher.

This happend to me quite a long time ago, and this is how you resolve it. "

28-08-2002	#1 (permalink)
cezium New on Forum Join Date: Nov 2001 Location: Sweden Posts: 12	Nero CD speed <a href='http://adstats.cdfreaks.com/www/delivery/ck.php?n=a13febf7&cb=INSERT_RANDOM_NUMBER_HERE' target='_blank'><img src='http://adstats.cdfreaks.com/www/delivery/avw.php?zoneid=30&cb=INSERT_RANDOM_NUMBER_HERE&n=a13febf7' border='0' alt='' /></a> Why doesn't nero cd speed work for me have just tried with my new lite-on 40x12x48x and I just get error 052602, which means PARAMETER VALUE INVALID, but whats that??? Any driver or something forgotten? I have aspi driver from nero installed

28-08-2002	#2 (permalink)
Mr. Belvedere CDFreaks Resident Join Date: Jun 2001 Location: married Posts: 14,669	Could we have some more hardware specs ? Tried it in safe mode ? __________________ I might be evil. Want to make dvd movie backups? Take the 5-step or the 2-step process. Fun, fast and free!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Jitter Speed setting tool v3 for Nero CD-DVD Speed NEW	C0deKing	LiteOn / PLDS/ Sony Burner	29	10-01-2008 09:48
Question about burning speed tests in Nero CD/DVD speed	Thrasher	Nero & InCD	6	19-03-2007 05:22
USD100,How to get DVD/CD Raw Data with Nero API as following showed in Nero CD Speed?	jeniff	Nero SDK Discussion Forum	5	20-07-2006 09:40
AMD X2, Nero CD Speed shows speed 2X speed setting!	IceBerg	Nero & InCD	0	27-01-2006 11:37
How can I change Nero CD-Speed Create Data Disk Speed?	MegaDETH	Media Testing/Identifying Software	4	03-12-2004 17:04

Commercial message
<a href='http://adstats.cdfreaks.com/www/delivery/ck.php?n=a5c5554b&cb=INSERT_RANDOM_NUMBER_HERE' target='_blank'><img src='http://adstats.cdfreaks.com/www/delivery/avw.php?zoneid=29&cb=INSERT_RANDOM_NUMBER_HERE&n=a5c5554b' border='0' alt='' /></a>

29-08-2002	#3 (permalink)
cezium New on Forum Join Date: Nov 2001 Location: Sweden Posts: 12	nope haven't done that. system specs win2k with sp2. epox 8kha+ with latest via 4-in-1 and via bus master utility. connected to secondary ide-connector master with no slave. firmware is zs0j and cdspeed 0.85e beta. harddrives on primary is one maxtor and one ibm. drive is running in dma mode 2 with 80-pin cable

01-09-2002	#4 (permalink)
cezium New on Forum Join Date: Nov 2001 Location: Sweden Posts: 12	just tried the new version 1.0 same problem except that it now does a spin-up then report error. anyonw know why?

06-09-2002	#5 (permalink)
JimHom CD Freaks Rookie Join Date: Sep 2002 Location: San Francisco Posts: 48	Below is a reply to my DMA - WinXP problem and it not only solve my DMA problem, but the same problem that you have - (052602) error. Of course, I'm assuming that you have Win XP. My 40125S is using firmware ZSON. "Go under device manager and ide controllers. Go into the ide ata/atpi controllers section. Delete all of the entries (should be 3 of them). Do not worry, you will not hurt anything. After deleting the ide controllers--the ata controller and the 2 ide channels. Goto to action and scan for new hardware. This will reset your ide controller and should fix your problem. Furthermore, do not install the latest ata controller from intel site, as this will not allow you to set your mode, the option is no longer there. If you did install the ata controller from intel, by deleting and scanning for new hardware, you will get the choice of which version to install. You WANT the driver dated 7/01/2001 version 5.1.2600.0 which came with Windows XP installation. the publisher is Microsoft Windows XP Publisher. This happend to me quite a long time ago, and this is how you resolve it. "