Feurio burned a CD that won't play - Club CDFreaks

dalecooper · 23-07-2002

Has anyone had this problem using Feurio? I burned an audio CD and it won't play. I'm new to the program-- this is the third disc I burned with it; the first two worked fine. But with this CD, when I put it into the player, it just spins like it can't find the data. You can skip to each track, but then it gets hung up trying to play the track.

Additional info: I'm using Memorex blanks (80 min); I'm playing back on home stereo and car stereo; I'm preparing wav files in Soundforge (they look ok there). I check all files prior to burning. This is my standard procedure and like I said, the other two CD's I did on Feurio worked ok. The twenty or so CD's I burned previously with Windows Media Player also work.

I'm not that familiar with CD burning yet, so I'm trying to figure out if it was just a software hiccup or maybe a bad blank or something. Thanks.

*minix* · 23-07-2002

Quote:

I burned an audio CD and it won't play

Doesn't it play a CDROM?
What does your CDROM say?
Has the tracks in it?

Memorex CDRs are not very good usually (made by CMC Magnetics). It can happen that the player is not very compatible with them so it can't find the "data".
Could be a bad blank, but it's not common that the previous worked.

Try to see if the music was really burned with several CDROMs / CDRWs readers.

What is your burner?
There are some that are only supported unofficially, and the generic MMC driver could not very totally compatible.

*damiandimitri* · 23-07-2002

can be bad media, but perhaps you can try to lower your burning speed

*BoSkin* · 23-07-2002

@dalecooper

Hello again ! First of all, my very sincere congratulations with your absolutely right choice !
And at the same time I can hardly believe my eyes that you've already had a problem with Feurio, it sounds like science fiction stuff to me.

Here's a little help to you http://www.feurio.de/English/faq/faq...problems.shtml

Don't be shy or afraid of asking questions regarding troubleshooting - PM or e-mail.
I understand this, it's not easy to get started w Feurio. But once you're in there, you'll forget anything else -
I use it daily and LOVE the prog !

**philamber** · 24-07-2002

Probably just bad media. Memorex have a pretty poor reputation. Try using another brand and burn at a lower speed (say 4x or 8x if that's your writer's minimum speed).

dalecooper · 24-07-2002

I got some Imation discs and tried those out. My next burn (same set of wav files) went fine. Later I was burning a few data CD's, and one of those didn't finish-- got an error in the burning process. I think I'm going to reduce speed, as it seems to be the burner and not the particular media.

Thanks for the help!

*BoSkin* · 25-07-2002

When in Ferio!CD Writer, try first using the 2 following features :

Only test [simulated burning]

Test, write if successful

This might give you good lessons on how to handle different media as well as save lots of your CDs, because you'll learn whether this particular speed is appropriate for this particular media or not.

Another very useful thing :

CD Writer -> Extras -> Test capacity of CD-R

So that you'll know how much of actual space is available on a CD.
And when every single test of media is saved and the CD-R database is created, you then might choose which CD has the most appropriate length for the current burning.

I usually burn audio CDs which length is between 80 and 82 min 20 sec.
So, this stuff always comes in handy, you know.

Good luck !

23-07-2002	#1 (permalink)
dalecooper New on Forum Join Date: Jul 2002 Posts: 8	Feurio burned a CD that won't play <a href='http://adstats.cdfreaks.com/www/delivery/ck.php?n=a13febf7&cb=INSERT_RANDOM_NUMBER_HERE' target='_blank'><img src='http://adstats.cdfreaks.com/www/delivery/avw.php?zoneid=30&cb=INSERT_RANDOM_NUMBER_HERE&n=a13febf7' border='0' alt='' /></a> Has anyone had this problem using Feurio? I burned an audio CD and it won't play. I'm new to the program-- this is the third disc I burned with it; the first two worked fine. But with this CD, when I put it into the player, it just spins like it can't find the data. You can skip to each track, but then it gets hung up trying to play the track. Additional info: I'm using Memorex blanks (80 min); I'm playing back on home stereo and car stereo; I'm preparing wav files in Soundforge (they look ok there). I check all files prior to burning. This is my standard procedure and like I said, the other two CD's I did on Feurio worked ok. The twenty or so CD's I burned previously with Windows Media Player also work. I'm not that familiar with CD burning yet, so I'm trying to figure out if it was just a software hiccup or maybe a bad blank or something. Thanks.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Burned CD does not play in vehicle	Girliegirl	Newbie Forum	8	16-06-2007 22:28
CD I burned won't play...help	Auntie	Newbie Forum	3	30-05-2006 17:59
feurio cd manager won't open or play ripped songs	ignatzatsonic	Burning Software	5	07-03-2004 16:56
Burned Civ3: Play the World but asks for CD when I try to play the game	reet_jeet	Burning Software	5	09-01-2003 04:03
burned cd doesn't play	guust	CD Freaks Living Room	2	15-02-2000 04:28

Commercial message
<a href='http://adstats.cdfreaks.com/www/delivery/ck.php?n=a5c5554b&cb=INSERT_RANDOM_NUMBER_HERE' target='_blank'><img src='http://adstats.cdfreaks.com/www/delivery/avw.php?zoneid=29&cb=INSERT_RANDOM_NUMBER_HERE&n=a5c5554b' border='0' alt='' /></a>

23-07-2002	#3 (permalink)
damiandimitri CDFreaks Resident Join Date: Feb 2002 Location: netherlands Posts: 3,535	can be bad media, but perhaps you can try to lower your burning speed

23-07-2002	#4 (permalink)
BoSkin CDFreaks Resident Join Date: May 2002 Location: Sthlm Posts: 5,497	@dalecooper Hello again ! First of all, my very sincere congratulations with your absolutely right choice ! And at the same time I can hardly believe my eyes that you've already had a problem with Feurio, it sounds like science fiction stuff to me. Here's a little help to you http://www.feurio.de/English/faq/faq...problems.shtml Don't be shy or afraid of asking questions regarding troubleshooting - PM or e-mail. I understand this, it's not easy to get started w Feurio. But once you're in there, you'll forget anything else - I use it daily and LOVE the prog !

24-07-2002	#5 (permalink)
philamber Legal Senior Admin Join Date: Jun 2002 Location: True Blue Posts: 6,767	Probably just bad media. Memorex have a pretty poor reputation. Try using another brand and burn at a lower speed (say 4x or 8x if that's your writer's minimum speed).

24-07-2002	#6 (permalink)
dalecooper New on Forum Join Date: Jul 2002 Posts: 8	I got some Imation discs and tried those out. My next burn (same set of wav files) went fine. Later I was burning a few data CD's, and one of those didn't finish-- got an error in the burning process. I think I'm going to reduce speed, as it seems to be the burner and not the particular media. Thanks for the help!

25-07-2002	#7 (permalink)
BoSkin CDFreaks Resident Join Date: May 2002 Location: Sthlm Posts: 5,497	When in Ferio!CD Writer, try first using the 2 following features : Only test [simulated burning] Test, write if successful This might give you good lessons on how to handle different media as well as save lots of your CDs, because you'll learn whether this particular speed is appropriate for this particular media or not. Another very useful thing : CD Writer -> Extras -> Test capacity of CD-R So that you'll know how much of actual space is available on a CD. And when every single test of media is saved and the CD-R database is created, you then might choose which CD has the most appropriate length for the current burning. I usually burn audio CDs which length is between 80 and 82 min 20 sec. So, this stuff always comes in handy, you know. Good luck !