Hi since yesterday i cannot burn any cd with Nero 5.5.5.6 , i have uninstall and installed again Nero and still the same , this is the error message Thank's in advance :
Windows XP 5.1
WinAspi: -
ahead WinASPI: File 'C:\Program Files\ahead\Nero\Wnaspi32.dll': Ver=2.0.1.28, size=172099 bytes, created 21/05/2001 13:35:20
Nero Version: 5.5.5.6
Recorder: <CyberDrv CW038D CD-R/RW> Version: 110c - HA 1 TA 1 - 5.5.5.6
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
CD-ROM: <SAMSUNG DVD-ROM SD-616F>Version: F101 - HA 1 TA 0 - 5.5.5.6
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST340810A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616F atapi Port 1 ID 0 DMA: On
CdRomPeripheral : CyberDrv CW038D CD-R/RW atapi Port 1 ID 1 DMA: On
=======================

AutoRun : 1
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 34603008 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261616kB)
Free physical memory: 79MB (80940kB)
Memory in use : 69 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry: 1
Wizard: Off

CD-ROM (ISO)
7.3.2002

00:00:35 #1 Phase 88 File dlgbrnst.cpp, Line 1421
ExacLink activated

00:00:35 #2 Text 0 File Reader.cpp, Line 117
Reader running

00:00:35 #3 Text 0 File Writer.cpp, Line 122
Writer CW038D CD-R/RW running

00:00:35 #4 ISO9660GEN -11 File geniso.cpp, Line 4306
First writeable address = 0 (0x00000000)

00:00:35 #5 Text 0 File ThreadedTransferInterface.cpp, Line 668
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 342004 (342004) = #342004/76:0.4
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------

00:00:37 #6 Text 0 File DlgWaitCD.cpp, Line 1301
Recorder: CyberDrv CW038D CD-R/RW;
CDR code: 00 97 27 45; OSJ entry from: Kodak Japan Limited
ATIP Data:
Special Info [hex] 1: B0 00 20, 2: 61 1B 2D (LI 97:27.45), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

00:00:40 #7 Text 0 File ThreadedTransferInterface.cpp, Line 803
Prepare recorder CW038D CD-R/RW for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Close CD
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 700731392

00:00:40 #8 Text 0 File ThreadedTransferInterface.cpp, Line 831
Removed 2 run-out blocks from end of track 1.

00:00:40 #9 Text 0 File ThreadedTransferInterface.cpp, Line 668
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 342004 (342004) = #342004/76:0.4
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 342002 blocks [CW038D CD-R/RW ]
--------------------------------------------------------------

00:00:40 #10 Phase 24 File dlgbrnst.cpp, Line 1421
Caching of files started

00:00:40 #11 Phase 25 File dlgbrnst.cpp, Line 1421
Caching of files completed

00:00:40 #12 Phase 36 File dlgbrnst.cpp, Line 1421
Burn process started at 8x (1 200 Ko/s)

00:00:40 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1899
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

00:00:40 #14 Text 0 File Mmc.cpp, Line 14696
Set BUFE: ExacLink -> ON

00:10:15 #15 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion

00:10:21 #16 SCSI -1114 File Cdrdrv.cpp, Line 1126
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x29 0x00

00:10:29 #17 SCSI -1023 File Cdrdrv.cpp, Line 1126
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x2C 0x00

00:10:29 #18 mmc -1023 File ThreadedTransferInterface.cpp, Line 959
Command sequence error

00:10:29 #19 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 959
Could not perform Fixation

00:10:29 #20 SCSI -1023 File Cdrdrv.cpp, Line 1126
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x2C 0x00

00:10:29 #21 mmc -1023 File ThreadedTransferInterface.cpp, Line 959
Command sequence error

00:10:29 #22 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 959
Could not perform Fixation

00:10:29 #23 Phase 38 File dlgbrnst.cpp, Line 1421
Burn process failed at 8x (1 200 Ko/s)

00:10:29 #24 Text 0 File Scsicmd.cpp, Line 371
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated


Existing drivers:

It would have been helpful if you posted the existing drivers. This is where you cut off the log.

The burn is failing at the finalization point. This can happen when recording in TAO. Some combinations of recorder and media have trouble reading the Program Memory Area (PMA) where the TOC is kept.

Try recording in DAO instead. Also try a different good quality media.

Hi , no it was not on TAO mode , i did'nt cut the log the log finished like i have posted here , i'am a newbies how can i find the driver information you asked for ?
Thank you for you reply

You're welcome.

If that's the complete log, don't worry about it. There are usually other drivers listed that may be causing conflicts.

I thought you were recording in TAO because at 40 seconds into the burn, the log states:
Burning in TAO is frequently associated with failures at the end of the burn. Since you are a newbie, I'll ask you to double check the burn dialog to make sure that the Write Method is "Disk-At-Once".

I would still try a different media.

Hi , no it's not a Disk-At-Once , i try to burn a ISO cd not a audio , the problem occur either with a Verbatim CD-RW or a Kodak CD-R but i just try to burn only small file and that work now.. , i remember that in fact this problem come when the size of the data i want to burn is almost too big , i saw just before the burning start a message who say " you don't have enough place on this CD to burn this except if you choose to finalize this cd whould you like to finalize this cd ? " then i say ok , in fact i have burn some CD who have a limit size but before yesterday i never have this problém .... is that mean that i cannot burn anymore limit size CD-R ???
i have to verify that the problem is only with big file , i burn now another CD and see if the problem is also for small file

hi , i have made some test and the problem finally is that since 2 days i cannot burn CD with a limit size of data to burn ( i was able to do that before ) , when i try to burn a CD with a big file Nero say that it's Possible but i just have to finalize this CD , so i choose to finalize the CD and then that don't wotk , anybody can tell me why that don't work anymore ?
( you can see the message error on my first post )
Thank You for you help

When you look in File / Compilation Info what is the "big" file size in MB that you are trying to burn?

Do you have "No Multisession" checked in the Multisession dialog of the New Compilation information?

In the Burn dialog, is "Disk-at-Once" checked?

In the Burn dialog, is "Buffer underrun protection" checked?

What type of media and media length are you using?

Is overburning enabled in File / Preferences / Expert Features and if so, what is the maximum CD length enabled?

Hi , :
<<When you look in File / Compilation Info what is the "big" file size in MB that you are trying to burn? >>
647 MO
<<Do you have "No Multisession" checked in the Multisession dialog of the New Compilation information? >>
it's a multissesion CD
<<In the Burn dialog, is "Disk-at-Once" checked? >>
it's not a disk-at-once ( it's not a audio CD i try to burn )
<<In the Burn dialog, is "Buffer underrun protection" checked? >>
i dunno i can't find this info ( it's a french version i have )
<<What type of media and media length are you using? >>
this time Verbatim CD-RW 650 Mo ( i also try with a TDK CD-R )
<<Is overburning enabled in File / Preferences / Expert Features and if so, what is the maximum CD length enabled?>>
no overburning
you have any idea why i cannot burn limit size CD-R ?

Yes, I have an idea.

If you are trying to burn 647 of data to a 74 minute (650 MB disk), you should not be burning in multisession. There is no point in using multisession, as you can't add any more sessions (and data) to the disk anyway.

By using the multisession setting, you have unknowingly added 28 MB of overhead to the session, which is resulting in a total of 675 MB of data (647 + 28) to be burned. This is beyond the 650 MB capability of the disk and is causing the failure.

Use the following settings:

No multisession

Disk-at-Once It doesn't have to be an audio CD.

Multisession is a high overhead recording mode. The first session requires 28 MB of overhead, and each subsequent session requires another 13 MB. If you were burning smaller files and used 10 sessions, you would have only about 505 MB for the actual data after the overhead is deducted. If a lot of sessions are written, a packet written disk has less overhead than a multisession disk.

Multisession should not be used unless you intend to write to the disk again. If the overhead requirements are not considered, it is common for multisession writes to fail when the remaining disk capacity is inadequate.

hi , i have made all the change you just say and still the same problem for 647Mb in a 650 Mb CD-RW , this is the new message error maybe you can find what is the problem

Windows XP 5.1
WinAspi: -
ahead WinASPI: File 'C:\Program Files\ahead\Nero\Wnaspi32.dll': Ver=2.0.1.28, size=172099 bytes, created 21/05/2001 13:35:20
Nero Version: 5.5.5.6
Recorder: <CyberDrv CW038D CD-R/RW> Version: 110c - HA 1 TA 1 - 5.5.5.6
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
CD-ROM: <SAMSUNG DVD-ROM SD-616F>Version: F101 - HA 1 TA 0 - 5.5.5.6
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST340810A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616F atapi Port 1 ID 0 DMA: On
CdRomPeripheral : CyberDrv CW038D CD-R/RW atapi Port 1 ID 1 DMA: On
=======================

AutoRun : 1
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 34603008 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261616kB)
Free physical memory: 72MB (74284kB)
Memory in use : 71 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry: 1
Wizard: Off

CD-ROM (ISO)
9.3.2002

23:12:57 #1 Phase 88 File dlgbrnst.cpp, Line 1421
ExacLink activated

23:12:58 #2 Text 0 File Reader.cpp, Line 117
Reader running

23:12:58 #3 Text 0 File Writer.cpp, Line 122
Writer CW038D CD-R/RW running

23:12:58 #4 ISO9660GEN -11 File geniso.cpp, Line 4306
First writeable address = 0 (0x00000000)

23:12:58 #5 Text 0 File ThreadedTransferInterface.cpp, Line 668
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 331096 (331096) = #331096/73:34.46
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------

23:13:06 #6 Text 0 File DlgWaitCD.cpp, Line 1301
Recorder: CyberDrv CW038D CD-R/RW;
CDRW code: 00 97 34 23; OSJ entry from: Mitsubishi Chemical
ATIP Data:
Special Info [hex] 1: A3 00 4E, 2: 61 22 17 (LI 97:34.23), 3: 4A 2B 00 (LO 74:43.00)
Additional Info [hex] 1: 24 2C 50, 2: 12 22 45, 3: 00 00 00 (invalid)

23:13:10 #7 Text 0 File ThreadedTransferInterface.cpp, Line 803
Prepare recorder CW038D CD-R/RW for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Close CD
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 678391808

23:13:10 #8 Text 0 File ThreadedTransferInterface.cpp, Line 831
Removed 2 run-out blocks from end of track 1.

23:13:10 #9 Text 0 File ThreadedTransferInterface.cpp, Line 668
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 331096 (331096) = #331096/73:34.46
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 331094 blocks [CW038D CD-R/RW ]
--------------------------------------------------------------

23:13:10 #10 Phase 24 File dlgbrnst.cpp, Line 1421
Caching of files started

23:13:10 #11 Phase 25 File dlgbrnst.cpp, Line 1421
Caching of files completed

23:13:10 #12 Phase 36 File dlgbrnst.cpp, Line 1421
Burn process started at 4x (600 Ko/s)

23:13:10 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1899
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

23:13:10 #14 Text 0 File Mmc.cpp, Line 14696
Set BUFE: ExacLink -> ON

23:31:34 #15 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion

23:31:41 #16 SCSI -1114 File Cdrdrv.cpp, Line 1126
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x29 0x00

23:31:48 #17 SCSI -1023 File Cdrdrv.cpp, Line 1126
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x2C 0x00

23:31:48 #18 mmc -1023 File ThreadedTransferInterface.cpp, Line 959
Command sequence error

23:31:48 #19 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 959
Could not perform Fixation

23:31:48 #20 SCSI -1023 File Cdrdrv.cpp, Line 1126
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x2C 0x00

23:31:48 #21 mmc -1023 File ThreadedTransferInterface.cpp, Line 959
Command sequence error

23:31:48 #22 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 959
Could not perform Fixation

23:31:48 #23 Phase 38 File dlgbrnst.cpp, Line 1421
Burn process failed at 4x (600 Ko/s)

23:31:48 #24 Text 0 File Scsicmd.cpp, Line 371
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated


Existing drivers:

The CDR's are "failing" at fixation. Most of the time these "failures" are readable. Did you try to read the CDR's that "failed"?

See the Nero Help Tool at Fixing failed

If the disks are not readable, I would recommend uninstalling your current version and downloading the most recent Nero version 5.5.7.8 at the Nero Download Page.

Hi , no the disk are not readable , i have instaled the lasted version and the problem still here ..
maybe i have to go back to Easy CD Creator ?

I had the same problem not long ago. I switched from Memorex 700MB-80min.CD-RW to a Fuji 650MB-74min. CD-RW and I've had no more problems.

HI i have do all the thing i know to resolve Nero problem ( disable XP inside burner , burn in No multisession , limit the speed to X4 , uninstall Nero and install it again and update the last version of Nero ) and after all that i still cannot burn 647 Mb in a 700 Mb CD-R ( the CD-R work fine to me since a while ) , this is the message error :
Windows XP 5.1
WinAspi: -
ahead WinASPI: File 'C:\Program Files\ahead\Nero\Wnaspi32.dll': Ver=2.0.1.45, size=172099 bytes, created 28/03/2002 16:50:12
Nero Version: 5.5.7.8
Recorder: <CyberDrv CW038D CD-R/RW> Version: 110c - HA 1 TA 1 - 5.5.7.8
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI
CD-ROM: <SAMSUNG DVD-ROM SD-616F>Version: F101 - HA 1 TA 0 - 5.5.7.8
Adapter driver: <atapi> HA 1
Bus Type : default (0) -> ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : ST340810A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616F atapi Port 1 ID 0 DMA: On
CdRomPeripheral : CyberDrv CW038D CD-R/RW atapi Port 1 ID 1 DMA: On
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 34603008 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261616kB)
Free physical memory: 102MB (104700kB)
Memory in use : 59 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Wizard: Off

CD-ROM (ISO)
28.3.2002

17:19:59 #1 Phase 88 File dlgbrnst.cpp, Line 1438
ExacLink activated

17:19:59 #2 Text 0 File Reader.cpp, Line 118
Reader running

17:19:59 #3 Text 0 File Writer.cpp, Line 127
Writer CyberDrv CW038D CD-R/RW running

17:19:59 #4 Text 0 File Burncd.cpp, Line 2621
Turn on Track-At-Once, using CD-R/RW media

17:19:59 #5 ISO9660GEN -11 File geniso.cpp, Line 4381
First writeable address = 0 (0x00000000)

17:19:59 #6 Text 0 File ThreadedTransferInterface.cpp, Line 684
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 336062 (336062) = #336062/74:40.62
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------

17:20:01 #7 Text 0 File DlgWaitCD.cpp, Line 196
Last possible write address on media: 359848 (79:59.73)
Last address to be written: 336064 (74:42.64)

17:20:02 #8 Text 0 File DlgWaitCD.cpp, Line 1338
Recorder: CyberDrv CW038D CD-R/RW;
CDR code: 00 97 27 45; OSJ entry from: Kodak Japan Limited
ATIP Data:
Special Info [hex] 1: B0 00 20, 2: 61 1B 2D (LI 97:27.45), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

17:20:05 #9 Text 0 File ThreadedTransferInterface.cpp, Line 834
Prepare recorder CyberDrv CW038D CD-R/RW for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Close Session
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 688562176

17:20:05 #10 Text 0 File ThreadedTransferInterface.cpp, Line 862
Removed 2 run-out blocks from end of track 1.

17:20:05 #11 Text 0 File ThreadedTransferInterface.cpp, Line 684
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 336062 (336062) = #336062/74:40.62
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 336060 blocks [CyberDrv CW038D CD-R/RW ]
--------------------------------------------------------------

17:20:05 #12 Phase 24 File dlgbrnst.cpp, Line 1438
Caching of files started

17:20:05 #13 Phase 25 File dlgbrnst.cpp, Line 1438
Caching of files completed

17:20:05 #14 Phase 36 File dlgbrnst.cpp, Line 1438
Burn process started at 4x (600 KB/s)

17:20:05 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1960
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

17:20:05 #16 Text 0 File Mmc.cpp, Line 15663
Set BUFE: ExacLink -> ON

17:38:47 #17 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion

17:39:04 #18 SCSI -1023 File Cdrdrv.cpp, Line 1211
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x2C 0x00

17:39:04 #19 mmc -1023 File ThreadedTransferInterface.cpp, Line 990
Command sequence error

17:39:04 #20 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 990
Could not perform Fixation

17:39:04 #21 SCSI -1023 File Cdrdrv.cpp, Line 1211
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x2C 0x00

17:39:04 #22 mmc -1023 File ThreadedTransferInterface.cpp, Line 990
Command sequence error

17:39:04 #23 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 990
Could not perform Fixation

17:39:04 #24 Phase 38 File dlgbrnst.cpp, Line 1438
Burn process failed at 4x (600 KB/s)

17:39:04 #25 Text 0 File Scsicmd.cpp, Line 368
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated


Existing drivers:
Thank for you help

polim,

Since this is the same problem you had in the earlier thread, I have merged the threads to give some background and continuity to the situation.

What kind of media are you using? Have you tried a different brand of good quality media?

HI , not sure that it's the same problem because last time it was with limit size ( about 695 Mb ) now i just try to burn 671 Mb in a 700 Mb CD-R , i have burn many CD-R who have more then 671 Mb since today with the same CD-R media Kodak Ultima 80
Thank you

Try a different good quality brand of media. This is a standard procedure. Media that once worked OK may fail under some circumstances. Things change.

Try a different good quality brand of media.

ok i go buy another media but until that i have made a test with only 650 Mb ( still on 700 Mb CD-R ) and this time the problem was not a the end of the burning session but at the beginning , i saw in the log a "Queuing failed" problem , wat is that ? , this is the log of this last test :

Windows XP 5.1
WinAspi: -
ahead WinASPI: File 'C:\Program Files\ahead\Nero\Wnaspi32.dll': Ver=2.0.1.45, size=172099 bytes, created 28/03/2002 16:50:12
Nero Version: 5.5.7.8
Recorder: <CyberDrv CW038D CD-R/RW> Version: 110c - HA 1 TA 1 - 5.5.7.8
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI
CD-ROM: <SAMSUNG DVD-ROM SD-616F>Version: F101 - HA 1 TA 0 - 5.5.7.8
Adapter driver: <atapi> HA 1
Bus Type : default (0) -> ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : ST340810A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616F atapi Port 1 ID 0 DMA: On
CdRomPeripheral : CyberDrv CW038D CD-R/RW atapi Port 1 ID 1 DMA: On
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 34603008 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261616kB)
Free physical memory: 90MB (92980kB)
Memory in use : 64 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Wizard: Off

CD-ROM (ISO)
28.3.2002

20:00:30 #1 Phase 88 File dlgbrnst.cpp, Line 1438
ExacLink activated

20:00:30 #2 Text 0 File Reader.cpp, Line 118
Reader running

20:00:30 #3 Text 0 File Writer.cpp, Line 127
Writer CyberDrv CW038D CD-R/RW running

20:00:30 #4 Text 0 File Burncd.cpp, Line 2621
Turn on Track-At-Once, using CD-R/RW media

20:00:30 #5 ISO9660GEN -11 File geniso.cpp, Line 4381
First writeable address = 0 (0x00000000)

20:00:30 #6 Text 0 File ThreadedTransferInterface.cpp, Line 684
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 285830 (285830) = #285830/63:31.5
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------

20:00:31 #7 Text 0 File DlgWaitCD.cpp, Line 196
Last possible write address on media: 359848 (79:59.73)
Last address to be written: 285832 (63:33.07)

20:00:33 #8 Text 0 File DlgWaitCD.cpp, Line 1338
Recorder: CyberDrv CW038D CD-R/RW;
CDR code: 00 97 27 45; OSJ entry from: Kodak Japan Limited
ATIP Data:
Special Info [hex] 1: B0 00 20, 2: 61 1B 2D (LI 97:27.45), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

20:00:35 #9 Text 0 File ThreadedTransferInterface.cpp, Line 834
Prepare recorder CyberDrv CW038D CD-R/RW for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Close Session
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 585687040

20:00:35 #10 Text 0 File ThreadedTransferInterface.cpp, Line 862
Removed 2 run-out blocks from end of track 1.

20:00:35 #11 Text 0 File ThreadedTransferInterface.cpp, Line 684
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 285830 (285830) = #285830/63:31.5
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 285828 blocks [CyberDrv CW038D CD-R/RW ]
--------------------------------------------------------------

20:00:35 #12 Phase 24 File dlgbrnst.cpp, Line 1438
Caching of files started

20:00:35 #13 Phase 25 File dlgbrnst.cpp, Line 1438
Caching of files completed

20:00:35 #14 Phase 36 File dlgbrnst.cpp, Line 1438
Burn process started at 4x (600 KB/s)

20:00:35 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1960
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

20:00:36 #16 Text 0 File Mmc.cpp, Line 15663
Set BUFE: ExacLink -> ON

20:00:50 #17 Text 0 File Writer.cpp, Line 304
20:00:50.701 - CyberDrv CW038D CD-R/RW : Queue again later (Intervall : 100msec)

20:04:50 #18 CDR -20 File Writer.cpp, Line 311
Queuing failed

20:04:50 #19 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion

20:04:50 #20 Text 0 File ThreadedTransfer.cpp, Line 216
conversion idle, stopping reader

20:05:37 #21 CDR -201 File WriterStatus.cpp, Line 186
Invalid writestate

20:05:37 #22 TRANSFER -18 File WriterStatus.cpp, Line 186
Could not perform EndTrack

20:06:41 #23 Phase 38 File dlgbrnst.cpp, Line 1438
Burn process failed at 4x (600 KB/s)

20:06:41 #24 Text 0 File Scsicmd.cpp, Line 368
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated


Existing drivers:

Try disabling DMA for the burner and set it for PIO mode instead. Reboot and try burning again.

See Device Settings Are Hard to Find in Windows XP (Q310751) for the settings location.

hi , i have made the change you have said , that work for 671Mb so i have tried with 683 Mb and that don't work ( in a 700 Mb CD-R ) , i saw in the log error again "Queuing failed" , i just buy another media ( TDK support 24 X speed ) and i can burn 647 Mb in a 650 Mb so finaly i don't know if you think it's a problem that i can only burn 671 Mb and not 683 Mb in a 700 Mb CD-R who worked fine before , anyway this is the log error of the 683 Mb failed CD-R
Thank You for you idea !

Windows XP 5.1
WinAspi: -
ahead WinASPI: File 'C:\Program Files\ahead\Nero\Wnaspi32.dll': Ver=2.0.1.45, size=172099 bytes, created 28/03/2002 16:50:12
Nero Version: 5.5.7.8
Recorder: <CyberDrv CW038D CD-R/RW> Version: 110c - HA 1 TA 1 - 5.5.7.8
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI
CD-ROM: <SAMSUNG DVD-ROM SD-616F>Version: F101 - HA 1 TA 0 - 5.5.7.8
Adapter driver: <atapi> HA 1
Bus Type : default (0) -> ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : ST340810A atapi Port 0 ID 0 DMA: Off
CdRomPeripheral : SAMSUNG DVD-ROM SD-616F atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : CyberDrv CW038D CD-R/RW atapi Port 1 ID 1 DMA: Off
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 34603008 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261616kB)
Free physical memory: 98MB (100852kB)
Memory in use : 61 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Wizard: Off

CD-ROM (ISO)
29.3.2002

11:53:09 #1 Phase 88 File dlgbrnst.cpp, Line 1438
ExacLink activated

11:53:09 #2 Text 0 File Reader.cpp, Line 118
Reader running

11:53:09 #3 Text 0 File Writer.cpp, Line 127
Writer CyberDrv CW038D CD-R/RW running

11:53:09 #4 Text 0 File Burncd.cpp, Line 2621
Turn on Track-At-Once, using CD-R/RW media

11:53:09 #5 ISO9660GEN -11 File geniso.cpp, Line 4381
First writeable address = 0 (0x00000000)

11:53:09 #6 Text 0 File ThreadedTransferInterface.cpp, Line 684
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 342003 (342003) = #342003/76:0.3
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------

11:53:10 #7 Text 0 File DlgWaitCD.cpp, Line 196
Last possible write address on media: 359848 (79:59.73)
Last address to be written: 342005 (76:02.05)

11:53:12 #8 Text 0 File DlgWaitCD.cpp, Line 1338
Recorder: CyberDrv CW038D CD-R/RW;
CDR code: 00 97 27 45; OSJ entry from: Kodak Japan Limited
ATIP Data:
Special Info [hex] 1: B0 00 20, 2: 61 1B 2D (LI 97:27.45), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

11:53:15 #9 Text 0 File ThreadedTransferInterface.cpp, Line 834
Prepare recorder CyberDrv CW038D CD-R/RW for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Close Session
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 700729344

11:53:15 #10 Text 0 File ThreadedTransferInterface.cpp, Line 862
Removed 2 run-out blocks from end of track 1.

11:53:15 #11 Text 0 File ThreadedTransferInterface.cpp, Line 684
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 342003 (342003) = #342003/76:0.3
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 342001 blocks [CyberDrv CW038D CD-R/RW ]
--------------------------------------------------------------

11:53:15 #12 Phase 24 File dlgbrnst.cpp, Line 1438
Caching of files started

11:53:15 #13 Phase 25 File dlgbrnst.cpp, Line 1438
Caching of files completed

11:53:15 #14 Phase 36 File dlgbrnst.cpp, Line 1438
Burn process started at 4x (600 KB/s)

11:53:15 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1960
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

11:53:15 #16 Text 0 File Mmc.cpp, Line 15663
Set BUFE: ExacLink -> ON

11:53:30 #17 Text 0 File Writer.cpp, Line 304
11:53:30.888 - CyberDrv CW038D CD-R/RW : Queue again later (Intervall : 100msec)

11:57:30 #18 CDR -20 File Writer.cpp, Line 311
Queuing failed

11:57:31 #19 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion

11:57:31 #20 Text 0 File ThreadedTransfer.cpp, Line 216
conversion idle, stopping reader

11:58:17 #21 CDR -201 File WriterStatus.cpp, Line 186
Invalid writestate

11:58:17 #22 TRANSFER -18 File WriterStatus.cpp, Line 186
Could not perform EndTrack

11:59:21 #23 Phase 38 File dlgbrnst.cpp, Line 1438
Burn process failed at 4x (600 KB/s)

11:59:21 #24 Text 0 File Scsicmd.cpp, Line 368
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated


Existing drivers:

I think that you may have a problem with your chipset drivers. What kind of motherboard and chipset do you have?

If you are not using the latest drivers, download and install the most recent chipset drivers for your motherboard. Reset the burner to DMA after doing this and try burning again.

hi , i have the motherboard msi K7T266 Pro 2 and chipset VIA KT266 , i have alredy installed the lastest VIA update , what can i do more ?
Thankx

If you can burn 647 MB with the new TDK 650 MB media, then your problem with the 80 minute media is likely to be bad media.

Buy some 80 minute TDK media and try it out.