Nero DVD speed.. how to read quality. - Club CDFreaks

Copywrite · 02-03-2006

Im not used to checking how clean my burns are but with my newer DVD's its been a pain backing them up so im trying to see wich method is turning out the best results. Could someome please explain how to read the quality graph on Nero? Maybe give me an example of a good scan and a bad one? Thank you in advance!

gOdisOnyOuRsIDe · 02-03-2006

Just run Nero CD-DVD Speed. If your disc scans 100% without any Damaged or Bad errors then your burn was sucessful.

Copywrite · 02-03-2006

Not sure what bad errors look like or where it shows them. I was watching the quality area and one of my scans was at 76 then a few at 0 which im sure isnt good.

Copywrite · 02-03-2006

Ive been running some TDK media I got and was getting like 50% quality on my scans.. I slowed it down to an 8X burn from 16X and now its in the 90s. I assume that was the issue. I scanned some TY media I burned a while back on my 3520A drive I used to have an had 99% quality. I guess good media is the key to my issues.

gOdisOnyOuRsIDe · 03-03-2006

Umm, you have Nero CD-DVD Speed don't you? If you do then it's impossible to not know how it looks like cause there's a legend on the right side that shows you what the different colours mean. Green means it's good, yellow means it's damaged and red means it's bad. Why don't you just run Nero CD-DVD Speed and figure it out for yourself.

**Arachne** · 03-03-2006

@Copywrite

What burner do you have? Some burners can do quality scans in CD-DVD Speed...hop over to the Blank Media forum (specifically, the Media Testing sub-forum) - there's a whole thread on how to interpret quality scans etc.

Anything you're unsure of, ask the folk in Blank Media...they're well up to speed on quality scanning.

reasonsnotrules · 04-03-2006

Quote:

Originally Posted by Copywrite

Ive been running some TDK media I got and was getting like 50% quality on my scans.. I slowed it down to an 8X burn from 16X and now its in the 90s. I assume that was the issue. I scanned some TY media I burned a while back on my 3520A drive I used to have an had 99% quality. I guess good media is the key to my issues.

sounds like you've got the hang of it based on this post!

the higher the better. good media = better burns.

poor media will sometimes benefit from slowing down the burn speed.

up to date firmware benefits all aspects of burning.

red is bad. 0% is bad. the lower the spikes in teh graph the better...there's not much to it.

for in-depth, technical information on what the graphs mean check out the "media testing" subforum in the blank media forum. there are stickies about this exact topic.

02-03-2006	#1 (permalink)
Copywrite CD Freaks Junior Member Join Date: Mar 2005 Posts: 98	Nero DVD speed.. how to read quality. <a href='http://adstats.cdfreaks.com/www/delivery/ck.php?n=a13febf7&cb=INSERT_RANDOM_NUMBER_HERE' target='_blank'><img src='http://adstats.cdfreaks.com/www/delivery/avw.php?zoneid=30&cb=INSERT_RANDOM_NUMBER_HERE&n=a13febf7' border='0' alt='' /></a> Im not used to checking how clean my burns are but with my newer DVD's its been a pain backing them up so im trying to see wich method is turning out the best results. Could someome please explain how to read the quality graph on Nero? Maybe give me an example of a good scan and a bad one? Thank you in advance!

02-03-2006	#2 (permalink)
gOdisOnyOuRsIDe CD Freaks Senior Member Join Date: Mar 2004 Location: USA Posts: 295	Re: Nero DVD speed.. how to read quality. Just run Nero CD-DVD Speed. If your disc scans 100% without any Damaged or Bad errors then your burn was sucessful. __________________ The further away I get from the things that I care about... the less I care about how much further away I get... Sys Specs: Asus P4C800-E Deluxe OCZ 700W GameXStream P4 2.6C OC'ed to 2.98GHz (stable) 2GB OCZ GX XTC PC4000 RAM ATi X850XT OC'ed to PE speeds SB X-Fi Fatal1ty 2x 74GB Raptor in RAID0 2x Hitachi Deskstar 500GB Plextor 760A (1.07) BenQ DW1655 (BCGB modified) Plextor Premium (1.07) Samsung S202N (SB01 FB FR)

02-03-2006	#3 (permalink)
Copywrite CD Freaks Junior Member Join Date: Mar 2005 Posts: 98	Re: Nero DVD speed.. how to read quality. Not sure what bad errors look like or where it shows them. I was watching the quality area and one of my scans was at 76 then a few at 0 which im sure isnt good.

02-03-2006	#4 (permalink)
Copywrite CD Freaks Junior Member Join Date: Mar 2005 Posts: 98	Re: Nero DVD speed.. how to read quality. Ive been running some TDK media I got and was getting like 50% quality on my scans.. I slowed it down to an 8X burn from 16X and now its in the 90s. I assume that was the issue. I scanned some TY media I burned a while back on my 3520A drive I used to have an had 99% quality. I guess good media is the key to my issues.

03-03-2006	#5 (permalink)
gOdisOnyOuRsIDe CD Freaks Senior Member Join Date: Mar 2004 Location: USA Posts: 295	Re: Nero DVD speed.. how to read quality. Umm, you have Nero CD-DVD Speed don't you? If you do then it's impossible to not know how it looks like cause there's a legend on the right side that shows you what the different colours mean. Green means it's good, yellow means it's damaged and red means it's bad. Why don't you just run Nero CD-DVD Speed and figure it out for yourself. __________________ The further away I get from the things that I care about... the less I care about how much further away I get... Sys Specs: Asus P4C800-E Deluxe OCZ 700W GameXStream P4 2.6C OC'ed to 2.98GHz (stable) 2GB OCZ GX XTC PC4000 RAM ATi X850XT OC'ed to PE speeds SB X-Fi Fatal1ty 2x 74GB Raptor in RAID0 2x Hitachi Deskstar 500GB Plextor 760A (1.07) BenQ DW1655 (BCGB modified) Plextor Premium (1.07) Samsung S202N (SB01 FB FR)

Commercial message
<a href='http://adstats.cdfreaks.com/www/delivery/ck.php?n=a5c5554b&cb=INSERT_RANDOM_NUMBER_HERE' target='_blank'><img src='http://adstats.cdfreaks.com/www/delivery/avw.php?zoneid=29&cb=INSERT_RANDOM_NUMBER_HERE&n=a5c5554b' border='0' alt='' /></a>

03-03-2006	#6 (permalink)
Arachne Senior Moderator & Reviewer Join Date: Nov 2005 Location: Keeping my media stash safe. Posts: 24,649	Re: Nero DVD speed.. how to read quality. @Copywrite What burner do you have? Some burners can do quality scans in CD-DVD Speed...hop over to the Blank Media forum (specifically, the Media Testing sub-forum) - there's a whole thread on how to interpret quality scans etc. Anything you're unsure of, ask the folk in Blank Media...they're well up to speed on quality scanning. __________________ Current drives: Samsung SH-S203N (SB02 patched) + Pioneer DVR-115D (1.06) + Optiarc AD-5170S (1.12) + Litey LH-20A1H (LL0D) + Samsung SH-S182D (SB06 RPC1) x2 + Litey SHM-165P6S (MS0R) + LG E10N (JE07) + BenQ DW1650 (BCDC) x2 + Litey SHW-1635S (YV6P) x2 + BenQ DW1640@164B (BEFB) + LG 4167B (DL13 TDB) + Samsung SH-S162L (TS08) + NEC ND-4551A (1.Z2) + LG GCE-8520B (1.00) + LiteOn SOHR-5239S (2S0B) Retired: LiteOn LDW-851@SOHW-832 + LiteOn SOHW-1693S + LG 4163B My Review PCs How to delete your upper and lower filters : How to check/enable DMA by Womble Click here to join cdfreaks.com and be part of our friendly community! The CDFreaks Distributed Computing Teams need YOU! Join the Team(s) and help save some lives! Read more here

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nero CD-DVD speed disc quality scan greyed out?	HKPolice	General Software	3	11-09-2007 23:31
How to Read Nero CD-DVD Speed?– Sony DVD-R Quality	craige4u	Blank Media	43	17-08-2007 22:32
Nero Dvd Speed won't do a Quality scan with Pioneer 111 dbk	Lofkool	Asus / Pioneer Burner	1	01-01-2007 11:17
quality score with nero cd-dvd speed	studmonkey76	BenQ / Philips Burner	10	19-01-2005 06:52
Can't run Nero CD-DVD Speed quality test on 1300A	Atreides93	NEC / Optiarc Burner	5	23-06-2004 22:47