Nero Burnig - Club CDFreaks

Belly Buster · 07-09-2002

When I compile and write a Data CD with Nero burning I always get the last square turn red, it do's this with all makes of CD's. when I run CD Speed Scandist it reads.

Good 99.06 %
Damaged 0.00 %
Unreadable 0.94 %
Surface scan completed

My writer is a LTR-48125W

Anyone else had this before and what could be causing it. Any help would be appreciated.

Thanks

*dfourthhorseman* · 07-09-2002

I wouldn't worry about that, I get that too, with all my three writers (Philips 4x, Plextor 24x, and Lite-On 32/48x), and the files read absolutely fine, with perfect extraction and checking when I check with CDCheck, comparing with the original.

JimHom · 07-09-2002

Nothing to worry about. It always occurs with Nero. This is a
common question in the forum. The best or only answer so far
is that it relates to Nero's multisession feature. I find scandisc
to be somewhat unreliable. I have one disc which I tested 3 times on my Liteon LTR-40125S which had damaged %'s of
39.37, 45.36, & 47.17. Fortunately, the unreadable was a
constant 0.11% which was the red sector at the end. Of course,
that same disc scored 0% damage on another burner with 0.11%
unreadable. On cdcheck, it was o.k..

Belly Buster · 07-09-2002

Thanks for your replies that has put my mind at rest

Thanks

JimHom · 07-09-2002

Forgot to mention that if you start a disc on no multisession with Nero then you should not get that red sector in cdspeed's scandisc.

*dfourthhorseman* · 08-09-2002

Quote:

Forgot to mention that if you start a disc on no multisession with Nero then you should not get that red sector in cdspeed's scandisc.

Not so, I always start off with no multisession checked. I think it has something to do with the write modes, or finalization, or both. But in any case, I agree, nothing to worry about.

Belly Buster · 08-09-2002

Thanks for your reply's I will give it ago.

flyer.flyer · 17-09-2003

Well, everybody is happy and still knowing NOTHING about this red sector.

It could contain allot of thinks....

I'm suggesting to use other burning software until we understund why this last sector is "UNREADABLE"
I tried all multisession options it has no influence!

Any other news about this?
Nero 5.5.8.0 actually

07-09-2002	#1 (permalink)
Belly Buster CD Freaks Junior Member Join Date: Jun 2002 Location: UK Posts: 94	Nero Burnig <a href='http://adstats.cdfreaks.com/www/delivery/ck.php?n=a13febf7&cb=INSERT_RANDOM_NUMBER_HERE' target='_blank'><img src='http://adstats.cdfreaks.com/www/delivery/avw.php?zoneid=30&cb=INSERT_RANDOM_NUMBER_HERE&n=a13febf7' border='0' alt='' /></a> When I compile and write a Data CD with Nero burning I always get the last square turn red, it do's this with all makes of CD's. when I run CD Speed Scandist it reads. Good 99.06 % Damaged 0.00 % Unreadable 0.94 % Surface scan completed My writer is a LTR-48125W Anyone else had this before and what could be causing it. Any help would be appreciated. Thanks __________________ BB. Last edited by Belly Buster; 07-09-2002 at 18:03.

07-09-2002	#4 (permalink)
Belly Buster CD Freaks Junior Member Join Date: Jun 2002 Location: UK Posts: 94	Thanks for your replies that has put my mind at rest Thanks __________________ BB.

08-09-2002	#7 (permalink)
Belly Buster CD Freaks Junior Member Join Date: Jun 2002 Location: UK Posts: 94	Thanks for your reply's I will give it ago. __________________ BB.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
dvd burnig problem	ianb	General Hardware Forum	2	21-04-2006 09:54
My first dual layer burnig	pidy	NEC / Optiarc Burner	0	26-03-2005 08:53
Burnig a VCD	whiteman98	Nero & InCD	1	07-11-2003 11:44
nero, simulating burnig disabled, help!	chemieboy	Burning Software	6	08-04-2002 06:59
Burnig cd interrupted	carpitor	CD Freaks Living Room	0	13-05-2000 00:37

Commercial message
<a href='http://adstats.cdfreaks.com/www/delivery/ck.php?n=a5c5554b&cb=INSERT_RANDOM_NUMBER_HERE' target='_blank'><img src='http://adstats.cdfreaks.com/www/delivery/avw.php?zoneid=29&cb=INSERT_RANDOM_NUMBER_HERE&n=a5c5554b' border='0' alt='' /></a>

07-09-2002	#2 (permalink)
dfourthhorseman CDFreaks Resident Join Date: Dec 2001 Location: Boston, MA, USA Posts: 631	I wouldn't worry about that, I get that too, with all my three writers (Philips 4x, Plextor 24x, and Lite-On 32/48x), and the files read absolutely fine, with perfect extraction and checking when I check with CDCheck, comparing with the original.

07-09-2002	#3 (permalink)
JimHom CD Freaks Rookie Join Date: Sep 2002 Location: San Francisco Posts: 48	Nothing to worry about. It always occurs with Nero. This is a common question in the forum. The best or only answer so far is that it relates to Nero's multisession feature. I find scandisc to be somewhat unreliable. I have one disc which I tested 3 times on my Liteon LTR-40125S which had damaged %'s of 39.37, 45.36, & 47.17. Fortunately, the unreadable was a constant 0.11% which was the red sector at the end. Of course, that same disc scored 0% damage on another burner with 0.11% unreadable. On cdcheck, it was o.k..

07-09-2002	#5 (permalink)
JimHom CD Freaks Rookie Join Date: Sep 2002 Location: San Francisco Posts: 48	Forgot to mention that if you start a disc on no multisession with Nero then you should not get that red sector in cdspeed's scandisc.

17-09-2003	#8 (permalink)
flyer.flyer CD Freaks Junior Member Join Date: Sep 2002 Location: Paris Posts: 65	Well, everybody is happy and still knowing NOTHING about this red sector. It could contain allot of thinks.... I'm suggesting to use other burning software until we understund why this last sector is "UNREADABLE" I tried all multisession options it has no influence! Any other news about this? Nero 5.5.8.0 actually