hi, I 'm trying to burn a movie with nero vision,but after creating menus and transcoding,nero ejects the disk and I get an error this has just started to happen I'm using the same media (Verbatim)
I have nero 6 I get the same if I try to copy a disk
os winxp Ps where can I find the nero log?

My nero Log

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 2:54:32 PM

NT-SPTI used
Nero API version: 6.6.1.15
Using interface version: 6.6.0.10
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\NeroVision
Internal Version: 6, 6, 1, 15

Recorder: Version: SB03 - HA 1 TA 1 - 6.6.1.15
Adapter driver: HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?

=== Scsi-Device-Map ===
CdRomPeripheral : TSSTcorpDVD-ROM SH-D163BSB01 JRAID Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
TSSTcorp DVD-ROM SH-D163B D: CDRom0
TSSTcorp CD/DVDW SH-S183L E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1983MB (2030812kB)
Free physical memory: 1471MB (1507156kB)
Memory in use : 25
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

19.4.2008
NeroAPI
7:25:13 PM #1 Phase 111 File APIProgress.cpp, Line 275
DVD-Video files sorted

7:25:13 PM #2 Text 0 File SCSIPTICommands.cpp, Line 403
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

7:25:14 PM #3 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

7:25:14 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

7:25:14 PM #5 Text 0 File Burncd.cpp, Line 3316
Turn on Disc-At-Once, using DVD media

7:25:15 PM #6 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1914127 (425:21.52, 3738MB)

7:25:15 PM #7 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

7:25:15 PM #8 Text 0 File DlgWaitCD.cpp, Line 2616
Recorder: TSSTcorp CD/DVDW SH-S183L, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193

7:25:15 PM #9 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================

7:25:15 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 814
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1914128 (1914128) = #1914128/425:21.53
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1914128 blocks [TSSTcorp CD/DVDW SH-S183L]
--------------------------------------------------------------

7:25:15 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1013
Prepare recorder [TSSTcorp CD/DVDW SH-S183L] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3920134144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1914128 | lead-out | 1 | 0x41 | 0x00

7:25:15 PM #12 Text 0 File SCSIPTICommands.cpp, Line 208
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

7:25:15 PM #13 Phase 24 File APIProgress.cpp, Line 275
Caching of files started

7:25:15 PM #14 Text 0 File Burncd.cpp, Line 4158
Cache writing successful.

7:25:15 PM #15 Phase 25 File APIProgress.cpp, Line 275
Caching of files completed

7:25:15 PM #16 Phase 36 File APIProgress.cpp, Line 275
Burn process started at 4x (5,540 KB/s)

7:25:18 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2717
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

7:25:18 PM #18 Text 0 File DVDR.cpp, Line 2846
Recording mode: Sequential Recording Mode

7:25:18 PM #19 Text 0 File DVDR.cpp, Line 3002
Start write address at LBA 0
DVD high compatibility mode: Yes

7:25:18 PM #20 Text 0 File Cdrdrv.cpp, Line 8737
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

7:25:32 PM #21 Text 0 File Cdrdrv.cpp, Line 1224
19:25:32.984 - E: TSSTcorp CD/DVDW SH-S183L : Queue again later

7:37:44 PM #22 Text 0 File WriterStatus.cpp, Line 113
start writing Lead-Out at LBA 1914128 (1D3510h), length 0 blocks

7:37:44 PM #23 Text 0 File DVDR.cpp, Line 3246
EndDAO: Last written address was 1914127

7:38:10 PM #24 Phase 37 File APIProgress.cpp, Line 275
Burn process completed successfully at 4x (5,540 KB/s)

7:38:11 PM #25 Text 0 File SCSIPTICommands.cpp, Line 253
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

7:38:15 PM #26 Text 0 File Cdrdrv.cpp, Line 9945
DriveLocker: UnLockVolume completed

7:38:15 PM #27 Text 0 File SCSIPTICommands.cpp, Line 403
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 3:07:32 PM
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'Drivers\InCDfs.SYS': Ver=4, 3, 23, 2, size=102016 bytes, created 3/23/2006 6:15:58 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 23, 2, size=29440 bytes, created 3/23/2006 6:15:56 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 23, 2, size=8704 bytes, created 3/23/2006 6:00:28 PM (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** NeroAPI, History File *** ======
1A25-0006-7130-2078-0382-5861

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=?.?.?.?, size=164112 bytes, created 11/2/2004 2:54:32 PM

NT-SPTI used
Nero API version: 6.6.1.15
Using interface version: 6.6.0.10
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\NeroVision
Internal Version: 6, 6, 1, 15

Recorder: Version: SB03 - HA 1 TA 0 - 6.6.1.15
Adapter driver: HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?

=== Scsi-Device-Map ===

=== CDRom-Device-Map ===
TSSTcorp CD/DVDW SH-S183L E: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1983MB (2030812kB)
Free physical memory: 1318MB (1350280kB)
Memory in use : 33
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

20.4.2008
NeroAPI
12:39:00 PM #1 Phase 111 File APIProgress.cpp, Line 275
DVD-Video files sorted

12:39:01 PM #2 Text 0 File SCSIPTICommands.cpp, Line 403
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

12:39:01 PM #3 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

12:39:01 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

12:39:02 PM #5 Text 0 File Burncd.cpp, Line 3316
Turn on Disc-At-Once, using DVD media

12:39:02 PM #6 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 747439 (166:05.64, 1459MB)

12:39:02 PM #7 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

12:39:02 PM #8 Text 0 File DlgWaitCD.cpp, Line 2616
Recorder: TSSTcorp CD/DVDW SH-S183L, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193

12:39:02 PM #9 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================

12:39:02 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 814
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 747440 (747440) = #747440/166:5.65
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 747440 blocks [TSSTcorp CD/DVDW SH-S183L]
--------------------------------------------------------------

12:39:02 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1013
Prepare recorder [TSSTcorp CD/DVDW SH-S183L] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1530757120, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
747440 | lead-out | 1 | 0x41 | 0x00

12:39:02 PM #12 Text 0 File SCSIPTICommands.cpp, Line 208
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

12:39:02 PM #13 Phase 24 File APIProgress.cpp, Line 275
Caching of files started

12:39:02 PM #14 Text 0 File Burncd.cpp, Line 4158
Cache writing successful.

12:39:02 PM #15 Phase 25 File APIProgress.cpp, Line 275
Caching of files completed

12:39:02 PM #16 Phase 36 File APIProgress.cpp, Line 275
Burn process started at 4x (5,540 KB/s)

12:39:05 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2717
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

12:39:05 PM #18 Text 0 File DVDR.cpp, Line 2846
Recording mode: Sequential Recording Mode

12:39:05 PM #19 Text 0 File DVDR.cpp, Line 3002
Start write address at LBA 0
DVD high compatibility mode: Yes

12:39:05 PM #20 Text 0 File Cdrdrv.cpp, Line 8737
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

12:39:20 PM #21 Text 0 File Cdrdrv.cpp, Line 1224
12:39:20.593 - E: TSSTcorp CD/DVDW SH-S183L : Queue again later

12:44:04 PM #22 Text 0 File WriterStatus.cpp, Line 113
start writing Lead-Out at LBA 747440 (B67B0h), length 0 blocks

12:44:05 PM #23 Text 0 File DVDR.cpp, Line 3246
EndDAO: Last written address was 747439

12:44:25 PM #24 Phase 37 File APIProgress.cpp, Line 275
Burn process completed successfully at 4x (5,540 KB/s)

12:44:26 PM #25 Text 0 File SCSIPTICommands.cpp, Line 253
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

12:44:29 PM #26 Text 0 File Cdrdrv.cpp, Line 9945
DriveLocker: UnLockVolume completed

12:44:29 PM #27 Text 0 File SCSIPTICommands.cpp, Line 403
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=?.?.?.?, size=101888 bytes, created 8/17/2001 3:07:32 PM
File 'Drivers\ASPI32.SYS': Ver=?.?.?.?, size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'Drivers\InCDfs.SYS': Ver=?.?.?.?, size=102016 bytes, created 3/23/2006 6:15:58 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=?.?.?.?, size=29440 bytes, created 3/23/2006 6:15:56 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=?.?.?.?, size=8704 bytes, created 3/23/2006 6:00:28 PM (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** NeroAPI, History File *** ======
Dan Sanderson

1A25-0006-7130-2078-0382-5861

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 2:54:32 PM

NT-SPTI used
Nero Version: 6.6.1.15
Internal Version: 6, 6, 1, 15
(Nero Express)
Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.6.1.15
Adapter driver: HA -1
Drive buffer :
CD-ROM: Version: SB03 - HA 1 TA 0 - 6.6.1.15
Adapter driver: HA 1

=== Scsi-Device-Map ===

=== CDRom-Device-Map ===
TSSTcorp CD/DVDW SH-S183L E: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1983MB (2030812kB)
Free physical memory: 1386MB (1420216kB)
Memory in use : 30
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

20.4.2008
DVD-Copy over Image
12:50:34 PM #1 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

12:50:34 PM #2 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Disc blank or invalid. Need valid original disc.
(Medium in drive: Unknown. Medium required by compilation: DVD.)

12:50:34 PM #3 Phase 23 File dlgbrnst.cpp, Line 1685
Reading disc aborted


Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 3:07:32 PM
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'Drivers\InCDfs.SYS': Ver=4, 3, 23, 2, size=102016 bytes, created 3/23/2006 6:15:58 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 23, 2, size=29440 bytes, created 3/23/2006 6:15:56 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 23, 2, size=8704 bytes, created 3/23/2006 6:00:28 PM (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Dan Sanderson

1A25-0006-7130-2078-0382-5861

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 2:54:32 PM

NT-SPTI used
Nero Version: 6.6.1.15
Internal Version: 6, 6, 1, 15
(Nero Express)
Recorder: Version: SB03 - HA 1 TA 1 - 6.6.1.15
Adapter driver: HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: Version: SB01 - HA 1 TA 0 - 6.6.1.15
Adapter driver: HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : TSSTcorpDVD-ROM SH-D163BSB01 JRAID Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
TSSTcorp DVD-ROM SH-D163B D: CDRom0
TSSTcorp CD/DVDW SH-S183L E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1983MB (2030812kB)
Free physical memory: 1565MB (1603480kB)
Memory in use : 21
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

20.4.2008
===== Disc-Copy over image - 1st step : Copy to image ...

2:00:30 PM #1 Text 0 File SCSIPTICommands.cpp, Line 403
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

2:00:30 PM #2 Text 0 File SCSIPTICommands.cpp, Line 208
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

2:00:30 PM #3 Text 0 File DVDCopy.cpp, Line 294
DVD Track-Information from source disc:
Media Type: DVD-R
S01 T01 Con 0x14 Start 0 Len 747440 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)

2:00:30 PM #4 Text 0 File DVDCopy.cpp, Line 407
Max -1 tracks of 1 allowed to copy
1: 0 - 747440 = 747440, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

2:00:30 PM #5 Text 0 File Burncd.cpp, Line 3316
Turn on Disc-At-Once, using DVD media

2:00:30 PM #6 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 4718591 (1048:34.41, 9215MB)
Last address to be written: 747439 (166:05.64, 1459MB)

2:00:30 PM #7 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

2:00:30 PM #8 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================

2:00:30 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 814
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 747440 (747440) = #747440/166:5.65
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 747440 blocks [ Image Recorder ]
--------------------------------------------------------------

2:00:30 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1013
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1530757120, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
747440 | lead-out | 1 | 0x41 | 0x00

2:00:30 PM #11 Phase 120 File dlgbrnst.cpp, Line 1685
Creating the image for burning

2:00:30 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2717
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

2:04:28 PM #13 Text 0 File WriterStatus.cpp, Line 113
< Image Recorder > start writing Lead-Out at LBA 747440 (B67B0h), length 0 blocks

2:04:28 PM #14 Phase 121 File dlgbrnst.cpp, Line 1685
Creating Image completed successfully

2:04:29 PM #15 Text 0 File SCSIPTICommands.cpp, Line 253
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

2:04:29 PM #16 Text 0 File SCSIPTICommands.cpp, Line 403
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

2:04:29 PM #17 Text 0 File Cdrdrv.cpp, Line 9945
DriveLocker: UnLockVolume completed



===== Disc-Copy over image - 2nd step : Burn the image ...

2:04:34 PM #1 Text 0 File SCSIPTICommands.cpp, Line 403
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

2:04:34 PM #2 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 1530757120
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00
1: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name:

2:04:34 PM #3 Text 0 File Burncd.cpp, Line 3316
Turn on Disc-At-Once, using DVD media

2:04:34 PM #4 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 747439 (166:05.64, 1459MB)

2:04:34 PM #5 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

2:04:34 PM #6 Text 0 File DlgWaitCD.cpp, Line 2616
Recorder: TSSTcorp CD/DVDW SH-S183L, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193

2:04:34 PM #7 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================

2:04:34 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 814
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 747440 (747440) = #747440/166:5.65
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 747440 blocks [TSSTcorp CD/DVDW SH-S183L]
--------------------------------------------------------------

2:04:34 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1013
Prepare recorder [TSSTcorp CD/DVDW SH-S183L] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1530757120, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
747440 | lead-out | 1 | 0x41 | 0x00

2:04:34 PM #10 Text 0 File SCSIPTICommands.cpp, Line 208
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

2:04:34 PM #11 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 18x (24,930 KB/s)

2:04:34 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2717
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

2:04:34 PM #13 Text 0 File DVDR.cpp, Line 2846
Recording mode: Sequential Recording Mode

2:04:34 PM #14 Text 0 File DVDR.cpp, Line 3002
Start write address at LBA 0
DVD high compatibility mode: Yes

2:04:34 PM #15 Text 0 File Cdrdrv.cpp, Line 8737
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

2:05:04 PM #16 SPTI -1064 File SCSIPassThrough.cpp, Line 178
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1064)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 00 00 00 00 20 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 21 02
Buffer x26030080: Len x10000
0x01 00 02 00 D6 00 00 00 40 82 F0 01 20 00 00 00
0x00 00 00 00 00 00 00 00 08 44 61 79 61 72 6E 61
0x20 74 68 65 20 4D 6F 76 00 00 00 00 00 00 00 00

2:05:04 PM #17 CDR -1064 File Writer.cpp, Line 281
Invalid block address
E: TSSTcorp CD/DVDW SH-S183L

2:05:04 PM #18 Text 0 File DVDR.cpp, Line 3246
EndDAO: Last written address was 31

2:05:09 PM #19 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 18x (24,930 KB/s)

2:05:10 PM #20 Text 0 File SCSIPTICommands.cpp, Line 253
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

2:05:14 PM #21 Text 0 File Cdrdrv.cpp, Line 9945
DriveLocker: UnLockVolume completed

2:05:14 PM #22 Text 0 File SCSIPTICommands.cpp, Line 403
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 3:07:32 PM
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'Drivers\InCDfs.SYS': Ver=4, 3, 23, 2, size=102016 bytes, created 3/23/2006 6:15:58 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 23, 2, size=29440 bytes, created 3/23/2006 6:15:56 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 23, 2, size=8704 bytes, created 3/23/2006 6:00:28 PM (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Dan Sanderson

1A25-0006-7130-2078-0382-5861

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 2:54:32 PM

NT-SPTI used
Nero Version: 6.6.1.15
Internal Version: 6, 6, 1, 15
(Nero Express)
Recorder: Version: SB03 - HA 1 TA 1 - 6.6.1.15
Adapter driver: HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: Version: SB01 - HA 1 TA 0 - 6.6.1.15
Adapter driver: HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : TSSTcorpDVD-ROM SH-D163BSB01 JRAID Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
TSSTcorp DVD-ROM SH-D163B D: CDRom0
TSSTcorp CD/DVDW SH-S183L E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1983MB (2030812kB)
Free physical memory: 1561MB (1599472kB)
Memory in use : 21
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

20.4.2008
===== Disc-Copy over image - 1st step : Copy to image ...

2:16:45 PM #1 Text 0 File SCSIPTICommands.cpp, Line 403
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

2:16:46 PM #2 Text 0 File SCSIPTICommands.cpp, Line 208
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

2:16:46 PM #3 Text 0 File DVDCopy.cpp, Line 294
DVD Track-Information from source disc:
Media Type: DVD-R
S01 T01 Con 0x14 Start 0 Len 747440 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)

2:16:46 PM #4 Text 0 File DVDCopy.cpp, Line 407
Max -1 tracks of 1 allowed to copy
1: 0 - 747440 = 747440, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

2:16:46 PM #5 Text 0 File Burncd.cpp, Line 3316
Turn on Disc-At-Once, using DVD media

2:16:46 PM #6 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 4718591 (1048:34.41, 9215MB)
Last address to be written: 747439 (166:05.64, 1459MB)

2:16:46 PM #7 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

2:16:46 PM #8 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================

2:16:46 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 814
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 747440 (747440) = #747440/166:5.65
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 747440 blocks [ Image Recorder ]
--------------------------------------------------------------

2:16:46 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1013
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1530757120, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
747440 | lead-out | 1 | 0x41 | 0x00

2:16:46 PM #11 Phase 120 File dlgbrnst.cpp, Line 1685
Creating the image for burning

2:16:46 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2717
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

2:20:44 PM #13 Text 0 File WriterStatus.cpp, Line 113
< Image Recorder > start writing Lead-Out at LBA 747440 (B67B0h), length 0 blocks

2:20:44 PM #14 Phase 121 File dlgbrnst.cpp, Line 1685
Creating Image completed successfully

2:20:45 PM #15 Text 0 File SCSIPTICommands.cpp, Line 253
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

2:20:45 PM #16 Text 0 File SCSIPTICommands.cpp, Line 403
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

2:20:45 PM #17 Text 0 File Cdrdrv.cpp, Line 9945
DriveLocker: UnLockVolume completed



===== Disc-Copy over image - 2nd step : Burn the image ...

2:20:50 PM #1 Text 0 File SCSIPTICommands.cpp, Line 403
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

2:20:50 PM #2 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 1530757120
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00
1: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name:

2:20:50 PM #3 Text 0 File Burncd.cpp, Line 3316
Turn on Disc-At-Once, using DVD media

2:20:50 PM #4 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 747439 (166:05.64, 1459MB)

2:20:50 PM #5 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

2:20:50 PM #6 Text 0 File DlgWaitCD.cpp, Line 2616
Recorder: TSSTcorp CD/DVDW SH-S183L, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193

2:20:50 PM #7 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================

2:20:50 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 814
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 747440 (747440) = #747440/166:5.65
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 747440 blocks [TSSTcorp CD/DVDW SH-S183L]
--------------------------------------------------------------

2:20:50 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1013
Prepare recorder [TSSTcorp CD/DVDW SH-S183L] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1530757120, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
747440 | lead-out | 1 | 0x41 | 0x00

2:20:50 PM #10 Text 0 File SCSIPTICommands.cpp, Line 208
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

2:20:50 PM #11 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 18x (24,930 KB/s)

2:20:50 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2717
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

2:20:50 PM #13 Text 0 File DVDR.cpp, Line 2846
Recording mode: Sequential Recording Mode

2:20:50 PM #14 Text 0 File DVDR.cpp, Line 3002
Start write address at LBA 0
DVD high compatibility mode: Yes

2:20:50 PM #15 Text 0 File Cdrdrv.cpp, Line 8737
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

2:21:22 PM #16 SPTI -1064 File SCSIPassThrough.cpp, Line 178
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1064)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 00 00 00 00 20 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 21 02
Buffer x26030080: Len x10000
0x01 00 02 00 D6 00 00 00 40 82 F0 01 20 00 00 00
0x00 00 00 00 00 00 00 00 08 44 61 79 61 72 6E 61
0x20 74 68 65 20 4D 6F 76 00 00 00 00 00 00 00 00

2:21:22 PM #17 CDR -1064 File Writer.cpp, Line 281
Invalid block address
E: TSSTcorp CD/DVDW SH-S183L

2:21:22 PM #18 Text 0 File DVDR.cpp, Line 3246
EndDAO: Last written address was 31

2:21:25 PM #19 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 18x (24,930 KB/s)

2:21:26 PM #20 Text 0 File SCSIPTICommands.cpp, Line 253
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

2:21:28 PM #21 Text 0 File Cdrdrv.cpp, Line 9945
DriveLocker: UnLockVolume completed

2:21:28 PM #22 Text 0 File SCSIPTICommands.cpp, Line 403
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 3:07:32 PM
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'Drivers\InCDfs.SYS': Ver=4, 3, 23, 2, size=102016 bytes, created 3/23/2006 6:15:58 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 23, 2, size=29440 bytes, created 3/23/2006 6:15:56 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 23, 2, size=8704 bytes, created 3/23/2006 6:00:28 PM (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
1A25-0006-7130-2078-0382-5861

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 2:54:32 PM

NT-SPTI used
Nero API version: 6.6.1.15
Using interface version: 6.6.0.10
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\NeroVision
Internal Version: 6, 6, 1, 15

Recorder: Version: SB03 - HA 1 TA 1 - 6.6.1.15
Adapter driver: HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?

=== Scsi-Device-Map ===
CdRomPeripheral : TSSTcorpDVD-ROM SH-D163BSB00 JRAID Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
TSSTcorp DVD-ROM SH-D163B D: CDRom0
TSSTcorp CD/DVDW SH-S183L E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1983MB (2030812kB)
Free physical memory: 1447MB (1482148kB)
Memory in use : 27
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

20.4.2008
NeroAPI
7:31:39 PM #1 Phase 111 File APIProgress.cpp, Line 275
DVD-Video files sorted

7:31:40 PM #2 Text 0 File SCSIPTICommands.cpp, Line 403
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

7:31:41 PM #3 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

7:31:42 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

7:31:42 PM #5 Text 0 File Burncd.cpp, Line 3316
Turn on Disc-At-Once, using DVD media

7:31:43 PM #6 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2032671 (451:42.21, 3970MB)

7:31:43 PM #7 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

7:31:43 PM #8 Text 0 File DlgWaitCD.cpp, Line 2616
Recorder: TSSTcorp CD/DVDW SH-S183L, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193

7:31:43 PM #9 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================

7:31:43 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 814
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2032672 (2032672) = #2032672/451:42.22
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2032672 blocks [TSSTcorp CD/DVDW SH-S183L]
--------------------------------------------------------------

7:31:43 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1013
Prepare recorder [TSSTcorp CD/DVDW SH-S183L] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4162912256, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2032672 | lead-out | 1 | 0x41 | 0x00

7:31:43 PM #12 Text 0 File SCSIPTICommands.cpp, Line 208
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

7:31:43 PM #13 Phase 24 File APIProgress.cpp, Line 275
Caching of files started

7:31:44 PM #14 Text 0 File Burncd.cpp, Line 4158
Cache writing successful.

7:31:44 PM #15 Phase 25 File APIProgress.cpp, Line 275
Caching of files completed

7:31:44 PM #16 Phase 36 File APIProgress.cpp, Line 275
Burn process started at 4x (5,540 KB/s)

7:31:46 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2717
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

7:31:46 PM #18 Text 0 File DVDR.cpp, Line 2846
Recording mode: Sequential Recording Mode

7:31:46 PM #19 Text 0 File DVDR.cpp, Line 3002
Start write address at LBA 0
DVD high compatibility mode: Yes

7:31:46 PM #20 Text 0 File Cdrdrv.cpp, Line 8737
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

7:32:18 PM #21 SPTI -1064 File SCSIPassThrough.cpp, Line 178
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1064)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 00 00 00 00 20 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 21 02
Buffer x26060080: Len x10000
0x01 00 02 00 64 00 00 00 71 DF F0 01 20 00 00 00
0x00 00 00 00 00 00 00 00 08 53 74 72 65 65 74 20
0x4B 69 6E 67 73 00 00 00 00 00 00 00 00 00 00 00

7:32:18 PM #22 CDR -1064 File Writer.cpp, Line 281
Invalid block address
E: TSSTcorp CD/DVDW SH-S183L

7:32:18 PM #23 Text 0 File DVDR.cpp, Line 3246
EndDAO: Last written address was 31

7:32:18 PM #24 Phase 38 File APIProgress.cpp, Line 275
Burn process failed at 4x (5,540 KB/s)

7:32:18 PM #25 Text 0 File SCSIPTICommands.cpp, Line 253
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

7:32:23 PM #26 Text 0 File Cdrdrv.cpp, Line 9945
DriveLocker: UnLockVolume completed

7:32:23 PM #27 Text 0 File SCSIPTICommands.cpp, Line 403
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 3:07:32 PM
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'Drivers\InCDfs.SYS': Ver=4, 3, 23, 2, size=102016 bytes, created 3/23/2006 6:15:58 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 23, 2, size=29440 bytes, created 3/23/2006 6:15:56 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 23, 2, size=8704 bytes, created 3/23/2006 6:00:28 PM (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** NeroAPI, History File *** ======
1A25-0006-7130-2078-0382-5861

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 2:54:32 PM

NT-SPTI used
Nero API version: 6.6.1.15
Using interface version: 6.6.0.10
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\NeroVision
Internal Version: 6, 6, 1, 15

Recorder: Version: SB03 - HA 1 TA 1 - 6.6.1.15
Adapter driver: HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?

=== Scsi-Device-Map ===
CdRomPeripheral : TSSTcorpDVD-ROM SH-D163BSB00 JRAID Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
TSSTcorp DVD-ROM SH-D163B D: CDRom0
TSSTcorp CD/DVDW SH-S183L E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1983MB (2030812kB)
Free physical memory: 1436MB (1470892kB)
Memory in use : 27
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

20.4.2008
NeroAPI
9:01:15 PM #1 Phase 111 File APIProgress.cpp, Line 275
DVD-Video files sorted

9:01:15 PM #2 Text 0 File SCSIPTICommands.cpp, Line 403
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

9:01:15 PM #3 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

9:01:16 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

9:01:16 PM #5 Text 0 File Burncd.cpp, Line 3316
Turn on Disc-At-Once, using DVD media

9:01:16 PM #6 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2032655 (451:42.05, 3970MB)

9:01:16 PM #7 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

9:01:16 PM #8 Text 0 File DlgWaitCD.cpp, Line 2616
Recorder: TSSTcorp CD/DVDW SH-S183L, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193

9:01:16 PM #9 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================

9:01:16 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 814
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2032656 (2032656) = #2032656/451:42.6
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2032656 blocks [TSSTcorp CD/DVDW SH-S183L]
--------------------------------------------------------------

9:01:16 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1013
Prepare recorder [TSSTcorp CD/DVDW SH-S183L] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4162879488, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2032656 | lead-out | 1 | 0x41 | 0x00

9:01:16 PM #12 Text 0 File SCSIPTICommands.cpp, Line 208
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

9:01:16 PM #13 Phase 24 File APIProgress.cpp, Line 275
Caching of files started

9:01:16 PM #14 Text 0 File Burncd.cpp, Line 4158
Cache writing successful.

9:01:16 PM #15 Phase 25 File APIProgress.cpp, Line 275
Caching of files completed

9:01:16 PM #16 Phase 36 File APIProgress.cpp, Line 275
Burn process started at 4x (5,540 KB/s)

9:01:19 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2717
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

9:01:19 PM #18 Text 0 File DVDR.cpp, Line 2846
Recording mode: Sequential Recording Mode

9:01:19 PM #19 Text 0 File DVDR.cpp, Line 3002
Start write address at LBA 0
DVD high compatibility mode: Yes

9:01:19 PM #20 Text 0 File Cdrdrv.cpp, Line 8737
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

9:01:48 PM #21 SPTI -1064 File SCSIPassThrough.cpp, Line 178
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1064)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 00 00 00 00 20 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 21 02
Buffer x26060080: Len x10000
0x01 00 02 00 E1 00 00 00 48 85 F0 01 20 00 00 00
0x00 00 00 00 00 00 00 00 08 44 61 79 61 72 6E 61
0x20 74 68 65 20 4D 6F 76 00 00 00 00 00 00 00 00

9:01:48 PM #22 CDR -1064 File Writer.cpp, Line 281
Invalid block address
E: TSSTcorp CD/DVDW SH-S183L

9:01:48 PM #23 Text 0 File DVDR.cpp, Line 3246
EndDAO: Last written address was 31

9:01:48 PM #24 Phase 38 File APIProgress.cpp, Line 275
Burn process failed at 4x (5,540 KB/s)

9:01:48 PM #25 Text 0 File SCSIPTICommands.cpp, Line 253
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

9:01:52 PM #26 Text 0 File Cdrdrv.cpp, Line 9945
DriveLocker: UnLockVolume completed

9:01:52 PM #27 Text 0 File SCSIPTICommands.cpp, Line 403
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 3:07:32 PM
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'Drivers\InCDfs.SYS': Ver=4, 3, 23, 2, size=102016 bytes, created 3/23/2006 6:15:58 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 23, 2, size=29440 bytes, created 3/23/2006 6:15:56 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 23, 2, size=8704 bytes, created 3/23/2006 6:00:28 PM (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** NeroAPI, History File *** ======
1A25-0006-7130-2078-0382-5861

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 2:54:32 PM

NT-SPTI used
Nero API version: 6.6.1.15
Using interface version: 6.6.0.10
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\NeroVision
Internal Version: 6, 6, 1, 15

Recorder: Version: SB03 - HA 1 TA 1 - 6.6.1.15
Adapter driver: HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?

=== Scsi-Device-Map ===
CdRomPeripheral : TSSTcorpDVD-ROM SH-D163BSB00 JRAID Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
TSSTcorp DVD-ROM SH-D163B D: CDRom0
TSSTcorp CD/DVDW SH-S183L E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1983MB (2030812kB)
Free physical memory: 1456MB (1490956kB)
Memory in use : 26
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

21.4.2008
NeroAPI
10:28:50 AM #1 Phase 111 File APIProgress.cpp, Line 275
DVD-Video files sorted

10:28:51 AM #2 Text 0 File SCSIPTICommands.cpp, Line 403
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

10:28:51 AM #3 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

10:28:52 AM #4 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

10:28:52 AM #5 Text 0 File Burncd.cpp, Line 3316
Turn on Disc-At-Once, using DVD media

10:28:52 AM #6 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1931615 (429:14.65, 3772MB)

10:28:52 AM #7 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

10:28:52 AM #8 Text 0 File DlgWaitCD.cpp, Line 2616
Recorder: TSSTcorp CD/DVDW SH-S183L, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193

10:28:52 AM #9 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:28:52 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 814
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1931616 (1931616) = #1931616/429:14.66
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1931616 blocks [TSSTcorp CD/DVDW SH-S183L]
--------------------------------------------------------------

10:28:52 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1013
Prepare recorder [TSSTcorp CD/DVDW SH-S183L] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3955949568, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1931616 | lead-out | 1 | 0x41 | 0x00

10:28:52 AM #12 Text 0 File SCSIPTICommands.cpp, Line 208
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

10:28:52 AM #13 Phase 24 File APIProgress.cpp, Line 275
Caching of files started

10:28:52 AM #14 Text 0 File Burncd.cpp, Line 4158
Cache writing successful.

10:28:52 AM #15 Phase 25 File APIProgress.cpp, Line 275
Caching of files completed

10:28:52 AM #16 Phase 36 File APIProgress.cpp, Line 275
Burn process started at 4x (5,540 KB/s)

10:28:55 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2717
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10:28:55 AM #18 Text 0 File DVDR.cpp, Line 2846
Recording mode: Sequential Recording Mode

10:28:55 AM #19 Text 0 File DVDR.cpp, Line 3002
Start write address at LBA 0
DVD high compatibility mode: Yes

10:28:55 AM #20 Text 0 File Cdrdrv.cpp, Line 8737
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

10:29:10 AM #21 Text 0 File Cdrdrv.cpp, Line 1224
10:29:10.578 - E: TSSTcorp CD/DVDW SH-S183L : Queue again later

10:29:34 AM #22 SPTI -1135 File SCSIPassThrough.cpp, Line 178
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 33 80 00 00 20 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x27a16740: Len x10000
0x00 00 01 BA 44 04 BE 5B 6C 01 01 89 C3 F8 00 00
0x01 E0 07 EC 80 00 00 FF C0 26 78 BD 94 BB 7F 53
0x00 4C CA 50 D0 0E A0 10 6C 0F 9F FF 00 68 FF 9F

10:29:34 AM #23 CDR -1135 File Writer.cpp, Line 281
Write error
E: TSSTcorp CD/DVDW SH-S183L

10:29:34 AM #24 Text 0 File DVDR.cpp, Line 3246
EndDAO: Last written address was 13183

10:29:34 AM #25 Phase 38 File APIProgress.cpp, Line 275
Burn process failed at 4x (5,540 KB/s)

10:29:34 AM #26 Text 0 File SCSIPTICommands.cpp, Line 253
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

10:29:40 AM #27 Text 0 File Cdrdrv.cpp, Line 9945
DriveLocker: UnLockVolume completed

10:29:40 AM #28 Text 0 File SCSIPTICommands.cpp, Line 403
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 3:07:32 PM
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'Drivers\InCDfs.SYS': Ver=4, 3, 23, 2, size=102016 bytes, created 3/23/2006 6:15:58 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 23, 2, size=29440 bytes, created 3/23/2006 6:15:56 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 23, 2, size=8704 bytes, created 3/23/2006 6:00:28 PM (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** NeroAPI, History File *** ======

Disasble RAID, dont post serials.

hi, can you tell how to disable raid in the bios

Check the mobo manual.

I uninstalled the sata dvd-rw and installed a IDE dvd-rw, now I can burn a dvd in nerovision with out any issues, could it be the sata dvd burn is knacked?