Be part of the largest consumer electronics community of the world! Register now and join all the other happy members
| |||||||
| Commercial ads | |
| | |
|
  |
| | Thread Tools |
14-01-2007
| #1 (permalink) |
| CD Freaks Junior Member  Join Date: Jan 2007
Posts: 84
| 15 DL fails / 2 successful / failing again Hi, I decided to start a new thread as this doesn't relate to copyright protection or brand of DVD+R DL as my previous thread was about. I recently wasted 15 dual layer DVD+R DL's. Whenever I tried to copy a DVD+R DL they would seem to copy fine except for when I'd put them in my DVD players they would grind around and not read at all. Over the 15 failed burns I tried copying using different methods / programs etc, ImageBurn, Decrypter ISO read / write etc, hard drive to Nero etc They all failed. Today I made the changes below after 15 DVD+R DL coasters then copied 2 different DVD's successfully in a row, straight after I made these changes ! Out of the 2 successful burns I made one was a Verbatim DVD+R DL and the other was a TDK DVD+R DL, so this really doesn't seem to be an issue with the brand of DVD. *I noticed on my computer that local disc D has an enormous amount of space compared to local disc C. So: *I changed "Path for Cache" in Nero from C drive to D drive. *I changed Nero's Temp files, Picture files and Imported Video files from C drive to D drive. *In Nero Transcoding Quality-Quality Setting I changed it from "Standard Play" to "High Quality" and I changed Encoding Mode from "Fast Encoding (1 Pass)" to "High Quality (2 Pass VBR)", but this was in another mode (Nero Vision Express) - this actually wasn't an option in the mode I used (Nero Express) when I made the successful burn so I'm not sure what effect those changes had. *I also deleted the version of "DVD Decrypter" I had been using and downloaded and used " DVD Fab Decrypter 3". I opened Nero Express, selected DVD-Video Files, add the AUDIO TS and VIDEO TS folders from my hard drive and successfully burned. That's the same way I used to burn DVD+R DL DVD's months ago before I got the 15 coasters.... Today I went to copy a 3rd DVD and it's burning coasters again, so I tried to copy one of the 2 DVD's I successfully copied earlier today but it turned out as a coaster also .... Does anyone have any ideas why after 15 coasters I successfully burned 2 in a row after making the changes I listed above, and now I'm back to burning coasters (doing everything exactly the same as I did when I made the 2 successful burns). I think this is the end of DL burning for me.... Thanks again. |
|  |
|
14-01-2007
| #2 (permalink) |
| CDFreaks Resident  Join Date: Nov 2003 Location: Plymouth, UK
Posts: 913
| Re: 15 DL fails / 2 successful / failing again What DL media are you using? (Make and MID code if possible) The only Dual Layer media I have ever had any success with is Verbatim DVD+RDL
__________________ Current Setup Corsair 750W Core 2 Quad Q6700 @ 3.33GHz (333x10) Swiftech H20 Ultra+ Watercooling CoolerMaster Tsunami Dream Case 6GB PC6400 DDR2 RAM @ 4-4-4-15 800MHz (2x2 + 2x1) Asus P5K Deluxe 8800GTS @ 800/2000/1000 + Water block 19" BenQ 4:3 TFT 19" Hannson 16:9 TFT  BenQ 1655Lite-on 20A1SLG BD-R/HDDVD Samsung 750GB x 3 Raid 5 Logitech G15 Keyboard iPhone 3G 16GB Archos 560 Please dont PM me directly with your problems..... Thats what these forums are for. |
|
| |
|
14-01-2007
| #4 (permalink) |
| CDFreaks Resident Join Date: Jan 2004
Posts: 2,552
| Re: 15 DL fails / 2 successful / failing again Also what kinda booktype is your burner using as final format? DVD+R DL or DVD-ROM??? But as TimC says we need more detail as what it did and what error it is giving. Also vague details from what the error display or says doesn't give us much insight what is happening in that process your having. |
|
| |
|
15-01-2007
| #5 (permalink) |
| CD Freaks Junior Member Join Date: Jan 2007
Posts: 84
| Re: 15 DL fails / 2 successful / failing again Hi guys, there is another thread I made here last week here where I attached a failed burn log etc, in that particular burn I was using a TDK disc as I had run out of Verbatim discs, but I was getting the same results with Verbatim, out of th 15 failed burns the majority of the discs were Verbatim. Amazingly in the 2 recent successful burns I made one discs was TDK and one was Verbatim. This will give you some idea to the methods I have already tried, the discs either seem to burn with no error but when I try to play them will just grind around in my player and not read, or I will get Power Calibration Errors. http://club.cdfreaks.com/showthread.php?t=205666 Someone is telling me it's a layer break issue and the only thing that will truly solve the issue is using AnyDVD and CloneCD, unfortunetly they're not free and I tried AnyDVD some weeks ago for another reason and the trial has expired. |
|
| |
|
15-01-2007
| #6 (permalink) |
| CD Freaks Die Hard  Join Date: Mar 2006 Location: Wisconsin, USA
Posts: 1,291
| Re: 15 DL fails / 2 successful / failing again I just responded to your other thread and provided the links to the ripit4me and imgburn products as requested. Having both threads going has the potential to be frustrating. |
|
| |
|
15-01-2007
| #7 (permalink) |
| CD Freaks Junior Member Join Date: Jan 2007
Posts: 84
| Re: 15 DL fails / 2 successful / failing again Hi jeff, sorry about the double post, I considered the other thread to be full of useless info now as there have been many things suggested there that can now definately be ruled out, I thought it was making it much easier for people to read through by summing everything up in a short version, rather than have to read through many posts of now useless info.... |
|
| |
|
15-01-2007
| #8 (permalink) |
| CDFreaks Resident Join Date: Oct 2004
Posts: 971
| Re: 15 DL fails / 2 successful / failing again Nero does not handle the changing the layer break well. That's when the laser switches to the second layer of the disc. If this is not corrrect the burn will fail or the playback may freeze. When i first started burning DL dvds i used Nero and had the same problems you're having. Someone suggested using this method and since then it's been no problems at all. Using Imgburn over Nero will definitely help but i use this method because i like seeing where the layer break is so i can check for errors during playback.
__________________ "Close your eyes, Look deep in your soul Step outside yourself And let your mind go, Frozen eyes stare deep in your mind as you die! Close your eyes... and forget your name Step outside yourself... and let your thoughts drain As you go insane....go insane!" 'Seasons in the Abyss' - Slayer |
|
| |
|
15-01-2007
| #9 (permalink) | |
| Senior Moderator & Editor  Join Date: Feb 2005 Location: New Fajara
Posts: 8,143
| Re: 15 DL fails / 2 successful / failing again Quote:
dual layer burn fail / single layer is OK Is this a copyright protection issue ? I appreciate you were considering it would be easier, but please let's keep it all in the same thread from now on. To be honest, even though it might grow to several pages, it's the best way of letting everyone know what the real progress has been.
__________________ . . ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ If you are new to the internet, have a query about digital storage, or would maybe like to tell us a bit about yourself: just register with us and try either the Newbie forum or the CD Freaks Living Room. Alternatively, if you fancy some chit-chat (without technical help), then you're welcome to use the Chatbox to have a natter to other experienced members and staff. Look what you get when you join CD Freaks:
the forum rules that everyone signs up to. So what are you waiting for? Click the smiley to join -->  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | |
|
| |
|
16-01-2007
| #10 (permalink) |
| CD Freaks Junior Member Join Date: Jan 2007
Posts: 84
| Re: 15 DL fails / 2 successful / failing again I purchased 3 Verbatim DVD+R DL discs today I managed to get a trial version of AnyDVD running. I did it this way as I have had success this way in the past. *Turned on AnyDVD and selected the drive I put the original DVD in that I wanted to copy. *Opened Nero Express *DVD-Video Files *Selected the original DVD in the drive (the audio and video ts files) *Then loaded them in using "add" and selected the files and burned at 2.4X. This has been successfual in the past, but I got the Error below in the log. I don't have the knowledge to understand it. Can anyone see what went wrong and why ? In the last few seconds I can see "Key Illegal Request" and "Key Medium Error" and "Power Calibration Error". Will going through this process exactly the same except burning with CDClone and not nero really make a difference with the layer break ? I've only got 2 Verbatim discs left ? Any help is really appreciated , thanks ! Code: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 27/10/2004 3:35:32 AM Nero Version: 6.6.0.17 Internal Version: 6, 6, 0, 17c (Nero Express) Recorder: <LITE-ON DVDRW SHM-165P6S>Version: MS0P - HA 0 TA 1 - 6.6.0.17 Adapter driver: <atapi> HA 0 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <PIONEER DVD-ROM DVD-120 >Version: 1.22 - HA 1 TA 1 - 6.6.0.17 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : ST3120023A atapi Port 0 ID 0 DMA: On CdRomPeripheral : LITE-ON DVDRW SHM-165P6S atapi Port 0 ID 1 DMA: On CdRomPeripheral : SAMSUNG CD-R/RW SW-240B atapi Port 1 ID 0 DMA: On CdRomPeripheral : PIONEER DVD-ROM DVD-120 atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === LITE-ON DVDRW SHM-165P6S E: CDRom0 SAMSUNG CD-R/RW SW-240B F: CDRom1 PIONEER DVD-ROM DVD-120 G: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 70254592 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 479MB (490852kB) Free physical memory: 54MB (55648kB) Memory in use : 88 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 16.1.2007 UDF/ISO compilation 11:25:17 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 11:25:18 PM #2 Text 0 File DVDVideoCompilation.cpp, Line 552 Content of VIDEO_TS.IFO has been modified 11:25:18 PM #3 Text 0 File DVDVideoCompilation.cpp, Line 552 Content of VIDEO_TS.BUP has been modified 11:25:18 PM #4 Text 0 File DVDVideoCompilation.cpp, Line 552 Content of VTS_01_0.IFO has been modified 11:25:18 PM #5 Text 0 File DVDVideoCompilation.cpp, Line 552 Content of VTS_01_0.BUP has been modified 11:25:18 PM #6 Phase 113 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed 11:25:18 PM #7 Text 0 File Isodoc.cpp, Line 6356 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 11:25:18 PM #8 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 11:25:18 PM #9 Text 0 File Reader.cpp, Line 127 Reader running 11:25:18 PM #10 Text 0 File Writer.cpp, Line 122 Writer LITE-ON DVDRW SHM-165P6S running 11:25:18 PM #11 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 11:25:18 PM #12 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 11:25:18 PM #13 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 11:25:20 PM #14 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 4173823 (927:30.73, 8151MB) Last address to be written: 3837535 (852:47.10, 7495MB) 11:25:20 PM #15 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 11:25:20 PM #16 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: LITE-ON DVDRW SHM-165P6S, Media type: DVD+R9 Double Layer Disc Manufacturer ID: MKM, Media Type ID: 001, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 0 11:25:20 PM #17 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:25:20 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 3837536 (3837536) = #3837536/852:47.11 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3837536 blocks [LITE-ON DVDRW SHM-165P6S] -------------------------------------------------------------- 11:25:20 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [LITE-ON DVDRW SHM-165P6S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 7859273728, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 3837536 | lead-out | 1 | 0x41 | 0x00 11:25:20 PM #20 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 11:25:20 PM #21 Text 0 File Burncd.cpp, Line 4120 Cache writing successful. 11:25:20 PM #22 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 11:25:21 PM #23 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 2.4x (3,324 KB/s) 11:25:21 PM #24 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 11:26:07 PM #25 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0B7A0A00 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x21 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x24 0x00 11:26:07 PM #26 Text 0 File DVDPlusDualLayer.cpp, Line 628 L0 Data Zone Capacity set to 2062720 (1F7980h, 4028MB) -> OK, confirmed setting 11:26:07 PM #27 CDR -1205 File DVDPlusDualLayer.cpp, Line 655 Burning Layer 1 11:26:07 PM #28 Text 0 File DVDPlusDualLayer.cpp, Line 665 Start writing layer 1 at address 0 (0h) Recording mode: unknown Recording Mode 11:26:07 PM #29 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R DL (14), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable Linear Density: 0,293 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: FCFFFF h End Sector Number in Layer 0: 22797F h (LBN: 1F797F h, 4028 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 0 h Disc Manufacturer ID: MKM..... Media type ID: 001 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 64 Media Specific [16..63]: 00 00 00 4D 4B 4D 00 00 - 00 00 00 30 30 31 00 40 ...MKM.....001.@ 25 25 37 0C 02 2F 63 02 - 2F 63 21 23 0D 0E 14 14 %%7../c./c!#.... 02 01 01 10 00 21 23 0D - 0E 14 14 02 01 01 10 00 .....!#......... 11:26:07 PM #30 Text 0 File DVDR.cpp, Line 5814 Drive: LITE-ON DVDRW SHM-165P6S Book Type request [LO], rev 3: DVD-ROM Changing the Book Type was finished successfully, return code 0 11:26:07 PM #31 CDR -1211 File DVDR.cpp, Line 5235 Book Type set to: DVD-ROM 11:26:07 PM #32 Text 0 File DVDPlusRW.cpp, Line 665 Start write address at LBA 0 DVD high compatibility mode: Yes 11:47:32 PM #33 CDR -1206 File DVDPlusDualLayer.cpp, Line 1909 Burning Layer 2 11:47:32 PM #34 Text 0 File DVDPlusDualLayer.cpp, Line 1920 Perform layer 1 to 2 jump before writing at address 2062720 (1F7980h) 11:47:32 PM #35 SCSI -1106 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0B070000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x03 CDB Data: 0x2A 0x00 0x00 0x1F 0x79 0x80 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x73 0x03 11:47:32 PM #36 CDR -1106 File Writer.cpp, Line 311 Power calibration error 11:47:33 PM #37 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 11:47:33 PM #38 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 11:47:35 PM #39 SCSI -1106 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 0, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x03 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x73 0x03 11:47:35 PM #40 SCSI -1176 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 0, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x03 CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x72 0x03 11:47:35 PM #41 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders 11:47:35 PM #42 Phase 129 File dlgbrnst.cpp, Line 1832 Generating DVD borders completed successfully 11:47:35 PM #43 Text 0 File DVDR.cpp, Line 5814 Drive: LITE-ON DVDRW SHM-165P6S Book Type request [LO], rev 3: DVD+R DL Changing the Book Type was finished successfully, return code 0 11:47:35 PM #44 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 3/08/2004 10:59:44 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) Last edited by imkidd57; 16-01-2007 at 18:01. Reason: Added [code] tags to log file for clarity... |
|
| |
|
16-01-2007
| #11 (permalink) |
| CDFreaks Resident  Join Date: Aug 2004 Location: @FX labs .de ...watching [Bender's.Game] [Tripping.The.Rift.The.Movie]
Posts: 24,571
| Re: 15 DL fails / 2 successful / failing again Is your burner with the latest firmware already? If yes, try burning with Imgburn, maybe try simulation mode first, if possible.
__________________ Started with burning capable optical drives (CD-R) in 1997. Bought optical drives from AOpen, HP, LiteOn, NEC, Philips, Pioneer, Plextor, Ricoh, Samsung, Sanyo, Toshiba and Yamaha. 'Things are now in motion that cannot be undone.' [Gandalf, LoTR] Enable DMA with micrAp$0ft Enable DMA free at your will busTRACE => Upper/Lower Filters Util DevCon ***HOW TO ... Delete the Upper & Lower Filters!***  If you expect help then please start by using the powerful SEARCH. |
|
| |
|
16-01-2007
| #12 (permalink) |
| CDFreaks Resident Join Date: Oct 2004
Posts: 971
| Re: 15 DL fails / 2 successful / failing again It sounds like you're burning disc to disc. You should never do that, especially with a DL disc. If you're going to use AnyDvd you should get a copy of Dvd Decrypter from here. Having Anydvd running in the background will deal with the protections Dvd Decrypter can't. If you want an exact, uncompressed backup of the movie extract in .iso mode and make sure to check create a .mds file because that's where the layer break info is. Next download a copy of Imgburn from here. Burn the image making sure to use the .mds file to load into Imgburn. You can have Imgburn calculate the optimal layer break and you should be fine. As long as you keep burning DL dvds with Nero you will probably have issues. I'm not saying that just to be negative about Nero, i'm saying that because i had the same problems as you. I've read too many times where people are having trouble with DL discs and Nero. Someone suggested the method that I mentioned before and it's been no looking back. If you don't wan't to go through all of that at least try this way.
__________________ "Close your eyes, Look deep in your soul Step outside yourself And let your mind go, Frozen eyes stare deep in your mind as you die! Close your eyes... and forget your name Step outside yourself... and let your thoughts drain As you go insane....go insane!" 'Seasons in the Abyss' - Slayer |
|
| |
|
16-01-2007
| #13 (permalink) |
| CDFreaks Resident Join Date: May 2004
Posts: 2,018
| Re: 15 DL fails / 2 successful / failing again if your gonna use decrypter or anything else where you rip the dvd in "file mode"..i.e....video ts folders and such...use this tutorial on how to set the layer break using imgburn...also....rip to iso....don't use video ts for DL |
|
| |
|
17-01-2007
| #14 (permalink) |
| CD Freaks Junior Member Join Date: Jan 2007
Posts: 84
| Re: 15 DL fails / 2 successful / failing again Yes my firmware is up do date. I know it seems wrong that I always try to burn with Nero, and it might seem like I've ignored a few tips as I have mentioned Nero after people have told me not to use it but that is because the only times I have ever successfully copied a DL DVD I used Nero ! OK I just made a successful burn !, and again, I did it a way I have actually been told not to do it.... Maybe someone can offer more info or has a different opinion... First I should say I have previously failed 2 or 3 times using DVD Decrypter 3.5.4.0 to do an Iso Read and Iso write. I did the same today but did 1 thing different, I had AnyDVD running in the background, I have read not to do that because apparently DVD Decrypter and AnyDVD cause each other problems, but someone who has far more knowledge than myself told me to do it, so I did and I made my 3rd successful burn out of about 20 failed burns... I really hope that is the end of all my problems, but it sounds too good to be true, is AnyDVD really the solution to this ? I know I recently had 15 failed burns, then 2 successful then 5 failed after that, so I hope the next few burns don't end up being failed burns.... But this time an ISO Read & Write with DVD Decrypter 3.5.4.0 with AnyDVD running in the background has worked.... Does the burn log look OK ? I 15:22:27 DVD Decrypter Version 3.5.4.0 started! I 15:22:27 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 15:22:27 Initialising SPTI... I 15:22:27 Searching for SCSI / ATAPI devices... I 15:22:27 Found 1 CD-RW, 1 DVD-ROM and 1 DVD-RAM/±RW! I 15:23:46 Operation Started! I 15:23:46 Source File: D:\THE_CURE.MDS I 15:23:46 Source File Sectors: 3,837,352 (MODE1/2048) I 15:23:46 Source File Size: 7,858,896,896 bytes I 15:23:46 Source File Implementation Identifier: Sonic Scenarist 3.1 I 15:23:46 Destination Device: [0:1:0] LITE-ON DVDRW SHM-165P6S MS0P (E (ATA)I 15:23:47 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x) I 15:23:47 Destination Media Sectors: 4,173,824 I 15:23:47 Write Mode: DVD I 15:23:47 Write Type: SAO I 15:23:47 Write Speed: 4x I 15:23:47 Link Size: Auto I 15:23:47 Test Mode: No I 15:23:47 BURN-Proof: Enabled I 15:23:47 Optimal L0 Data Zone Capacity: 2,062,736 I 15:23:47 Optimal L0 Data Zone Method: Copied From Original Disc I 15:24:38 Filling Buffer... I 15:25:02 Writing LeadIn... I 15:25:04 Writing Image... I 15:53:55 Synchronising Cache... I 15:53:59 Closing Track... I 15:54:00 Finalising Disc... I 15:56:27 Operation Successfully Completed! - Duration: 00:32:40 I 15:56:27 Average Write Rate: 4,433 KB/s (3.2x) - Maximum Write Rate: 5,715 KB/s (4.1x) Thanks guys ! |
|
| |
|
17-01-2007
| #15 (permalink) |
| CD Freaks Guru  Join Date: Mar 2004 Location: UK
Posts: 7,499
| Re: 15 DL fails / 2 successful / failing again That's fine & exactly how it should be. It's also the way I'd do a 1:1 copy to DL media & the one most likely to succeed. I've never thought that AnyDVD & DVD Decrypter should have a problem working together. I'd be inclined to burn these ISO images with ImgBurn but it's unlikely to make any real difference. |
|
| |
|
17-01-2007
| #16 (permalink) |
| CD Freaks Junior Member Join Date: Jan 2007
Posts: 84
| Re: 15 DL fails / 2 successful / failing again OK, so this must mean AnyDVD helps burn the layer break properly and is not just used to crack the copyright on the discs ? Is that correct ? If not my problem isn't really solved as I had a couple of DVD+R DL discs that failed when I tried to copy them (without using AnyDVD), so obviously the DVD+R DL disc didn't fail because of copyright protection, it must have been something to do with the layer break as I have never had a problem burning single layer DVD's.... So I'm thinking my recent successful result was because AnyDVD helped burn the "layer break" correctly, would that be true ?, I thought it was only a copyright tool ? |
|
| |
|
17-01-2007
| #17 (permalink) | |
| CDFreaks Resident Join Date: Jun 2005
Posts: 969
| Re: 15 DL fails / 2 successful / failing again Quote:
Decrypter should have produced a mds file. You either load that mds file into imgburn (or double click it). This retains the layer break info. Using Nero cd-dvd speed first to change the booktype to dvd-rom and then using Clonecd with Anydvd running in the background is much easier and faster than using Decrypter + Imgburn (but the Clonecd+anydvd solution isn't free). The complete freeware method is to use Ripit4me/FixVTS/Decrypter + Imgburn (again, not as simple or as fast as using Anydvd+Clonecd). By the way, when backing up movies with Nero, people generally use Nero Recode--and not whatever method you were originally using. Nero Recode, like Shrink, however, will not retain the original layer break position (nor will most transcoder based apps). Consequently, I do not recommend using Shrink, Nero Recode, Clonedvd2, etc., with Verbatim +R DL discs if you wish to retain the original layer break position. These solutions are better suited, in my opinion, for single layer breaks. Again, with these programs, you need Anydvd running in the background while using them--or use Ripit4me first. Last edited by Webslinger; 17-01-2007 at 16:01. | |
|
| |
|
17-01-2007
| #19 (permalink) |
| CD Freaks Junior Member Join Date: Jan 2007
Posts: 84
| Re: 15 DL fails / 2 successful / failing again Yeah I know AnyDVD doesn't actually burn anything, I worded things the wrong way, sorry. I should have asked if AnyDVD helps prevent in any way things going wrong with the layer break (which in the end will prevent a bad / failed burn) as I thought AnyDVD was only used for copyright protection. |
|
| |
|
17-01-2007
| #20 (permalink) | |
| CDFreaks Resident Join Date: Jun 2005
Posts: 969
| Re: 15 DL fails / 2 successful / failing again Quote:
Otherwise, no | |
|
| |
| |
| |
 |
| If you can't find where you are looking for, then become a member and get an answer fast! We have thousands of people online every moment of the day to help you! Click here |
| Can't find where you are looking for? Search our knowledgebase! | Our Community Friends | ||
| | | ||
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| NEC-3540A Failing to burn DL DVD+R | Tengujin | NEC / Optiarc Burner | 6 | 31-03-2006 22:27 |
| Failing to write to DVD+R DL with NeroCMD. | Scobar | Nero SDK Discussion Forum | 2 | 13-02-2006 08:52 |
| DVD burning procedure fails 15 mins before end | pa_tater | Newbie Forum | 12 | 31-01-2005 14:18 |
| 2510a 2.15 fw DL test & DL bitsetting utility for stock firmware! | KenW | NEC / Optiarc Burner | 51 | 13-08-2004 18:16 |
« Previous Thread
|
Next Thread »
| Thread Tools | |
| |
All times are GMT +2. The time now is 02:33.
Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.1.0
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.1.0