new clonecd version crashes winxp on start (miniport.sys) - Club CDFreaks

WRFan · 06-11-2002

after installing clonecd 4.1.x winxp always crashes. tried the new version and the 4.1.0.1 fix, with or without virtualcd drive, nothing works, winxp always crashes, saying "irq less or equal" and the error is in miniport.sys (that's at least what the bluescreen says before winxp is restarted). only rebooting to the safe mode and uninstalling clonecd helps to resolve the problem.

seems to be a conflict between ? and clonecd.

I have daemon tools, alcohol 120, blindwrite suite, insectors 3, nero, and winoncd installed (the newest versions). plus aspi 4.60 force and 29160 adaptec scsi controller drivers for winxp. I guess the error is due to one of the above mentioned programmes.

hope Olli fixes this bug

**G@M3FR3@K** · 07-11-2002

An "IRQ not less or equal" is a problem caused by devices sharing the same IRQ channel on your computer. An example could be that your soundcard is sharing its IRQ with your GFX, LAN, or other PCI-cards. If I were you I'd check your device manager and check for problems there. I don't think the problem is caused by CloneCD. I'm no hardware expert so that's about all I know on the IRQ not less or equal subject.

WRFan · 08-11-2002

but all other burning programmes work fine. also all previous versions of clonecd worked fine. meaning it's a problem/bug with/in clonecd, not with my pc configuration.

also about sharing: modern windows systems allow sharing. e.g., my soundcard and graphic card share the same IRQ, and no problems there

**G@M3FR3@K** · 08-11-2002

Yes I know IRQ sharing is allowed but I believe there can be a maximum of three devices on one IRQ. Sometimes it happens that there are more devices on one channel resulting in error messages. It can also be a driver issue. What kind of hardware do you have? Using the latest drivers for your Adaptec SCSI card? The problem only occurs when installing CloneCD

WRFan · 09-11-2002

the problem occurs only with clonecd.

there's only one winxp driver for my scsi card, I've been using it without problems till now (it's an adaptec driver, the one on the winxp cd always resulted in buffer underruns when burning, but the new one works fine).

I installed clonecd on my win98 partition and it works fine. but I am too lazy to reboot every time from winxp to win98 when I want to use clonecd. I have to fix the issue on winxp

paul2u469 · 09-11-2002

i have the very same probblem so i downloaded the
CloneCd from the ftp site and not the http
installed it and no more blue screen ? what gives

4.1.0.1 is my v
hope this helps

Weshy · 09-11-2002

Perhaps it's Clone CD's Virtual Drive? I know it uses some sysem resources. Perhaps its conflicting with something.

Weshy.

WRFan · 09-11-2002

no, it's no a virtual drive problem. I tried to install without virtual drive, and still clonecd crashed winxp

*Inertia* · 09-11-2002

At DRIVER_IRQL_NOT LESS OR EQUAL there is a 7 page VIA Arena Forum thread on this problem.

Maybe some of the information contained in this forum discussion will be of benefit in troubleshooting your problem.

WRFan · 10-11-2002

no, they just talk about some weird problems with hardware in that forum. that's what happens when people are stupid enough to buy amd and via products - 7 pages full of whining. what do I care, I have an Intel processor. it's a clonecd bug. if I just knew which programme causes the conflict with clonecd. or rather vice versa - which programme clonecd doesn't like

**FutureProof** · 11-11-2002

Quote:

Originally posted by WRFan
...that's what happens when people are stupid enough to buy amd and via products - 7 pages full of whining. what do I care, I have an Intel processor...

hehe, I'd have to agree! I have one VIA board, Shuttle with Celeron 1.3, and it's as-slow-as, I hate it. Latest 4in1 crashed it.

I have XP and 98SE on my 815EP. I will install latest CCD tonight in XP pro and see what happens!

ZardoZ · 11-11-2002

I also have the same problem. I have 2 systems, both on XP SP-1. On one (a P4-2.4Ghz Dell 8200) it works 100%. On the other (a PII 450Mhz Dell Dimension R) it blue screens every time in the same way as the previous posts. Both systems had CloneCD updates from 4.0.1.10 to 4.1.0.1 without going via 4.1.0.0. Both worked fine on 4.0.1.10.
This has to be a CloneCD bug of some kind which is triggered by other devices or software installed on the 450 system.

And yes, I am a registered user of CloneCD, so it's not a "cracked" version....

**G@M3FR3@K** · 11-11-2002

Quote:

Originally posted by WRFan
that's what happens when people are stupid enough to buy amd and via products - 7 pages full of whining.

What?! AMD vs. Intel flamewar!

My VIA KT400 chipset is running very smooth..

jimsburnerbin · 11-11-2002

Too bad your Intel setup can't handle it.
I have ccd's latest running on two different Amd setups. One with a XP 2100+ on a Asus board with a VIA chipset, and a 1.33G on a Asus board with an Amd chip. I have no problems running ccd, blindwrite, or anything else, I have 2 burners in each machine, along with Nic's, modems, and several USB items in each machine. One is used for work and one is used for my Ham Radio station. Both are running XP Pro SP1
Too bad your Superior Intel setup sucks so bad.
Jim

**FutureProof** · 12-11-2002

Quote:

Originally posted by FutureProof

I have XP and 98SE on my 815EP. I will install latest CCD tonight in XP pro and see what happens!

NP

06-11-2002	#1 (permalink)
WRFan CD Freaks Rookie Join Date: Dec 2001 Posts: 42	new clonecd version crashes winxp on start (miniport.sys) <a href='http://adstats.cdfreaks.com/www/delivery/ck.php?n=a13febf7&cb=INSERT_RANDOM_NUMBER_HERE' target='_blank'><img src='http://adstats.cdfreaks.com/www/delivery/avw.php?zoneid=30&cb=INSERT_RANDOM_NUMBER_HERE&n=a13febf7' border='0' alt='' /></a> after installing clonecd 4.1.x winxp always crashes. tried the new version and the 4.1.0.1 fix, with or without virtualcd drive, nothing works, winxp always crashes, saying "irq less or equal" and the error is in miniport.sys (that's at least what the bluescreen says before winxp is restarted). only rebooting to the safe mode and uninstalling clonecd helps to resolve the problem. seems to be a conflict between ? and clonecd. I have daemon tools, alcohol 120, blindwrite suite, insectors 3, nero, and winoncd installed (the newest versions). plus aspi 4.60 force and 29160 adaptec scsi controller drivers for winxp. I guess the error is due to one of the above mentioned programmes. hope Olli fixes this bug

07-11-2002	#2 (permalink)
G@M3FR3@K Senior Moderator Join Date: Mar 2000 Location: Utrèg, The Netherlands Posts: 8,777	An "IRQ not less or equal" is a problem caused by devices sharing the same IRQ channel on your computer. An example could be that your soundcard is sharing its IRQ with your GFX, LAN, or other PCI-cards. If I were you I'd check your device manager and check for problems there. I don't think the problem is caused by CloneCD. I'm no hardware expert so that's about all I know on the IRQ not less or equal subject. __________________ CDFreaks.com - Independent CD and DVD recording news around the clock! I do not provide support via PM or e-mail, use our Forum instead. Need some help? Please use our search function first. When asking for help, please detail your problem! Become a member of this forum, it's free! Register here!

08-11-2002	#4 (permalink)
G@M3FR3@K Senior Moderator Join Date: Mar 2000 Location: Utrèg, The Netherlands Posts: 8,777	Yes I know IRQ sharing is allowed but I believe there can be a maximum of three devices on one IRQ. Sometimes it happens that there are more devices on one channel resulting in error messages. It can also be a driver issue. What kind of hardware do you have? Using the latest drivers for your Adaptec SCSI card? The problem only occurs when installing CloneCD __________________ CDFreaks.com - Independent CD and DVD recording news around the clock! I do not provide support via PM or e-mail, use our Forum instead. Need some help? Please use our search function first. When asking for help, please detail your problem! Become a member of this forum, it's free! Register here!

09-11-2002	#6 (permalink)
paul2u469 New on Forum Join Date: May 2001 Location: uk lincoln Posts: 8	IRQ not less or equal i have the very same probblem so i downloaded the CloneCd from the ftp site and not the http installed it and no more blue screen ? what gives 4.1.0.1 is my v hope this helps

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Plextor PX-740UF crashes Nero and WinXP - reward offered for help!	openengine	Plextor Burner	20	23-04-2007 05:30
Alcohol crashes immediatly when i try to start it :(	Latrosicarius	Alcohol	2	27-03-2006 20:20
Nero7 crashes, doesnt even start!	gcmospeada	Nero & InCD	25	20-10-2005 01:33
WinXP crashes except when in SafeMode	unknownsoldierX	General Hardware Forum	31	11-08-2005 10:15
A347bus.sys and program crashes	rdgrimes	Alcohol	5	05-02-2005 01:05

Commercial message
<a href='http://adstats.cdfreaks.com/www/delivery/ck.php?n=a5c5554b&cb=INSERT_RANDOM_NUMBER_HERE' target='_blank'><img src='http://adstats.cdfreaks.com/www/delivery/avw.php?zoneid=29&cb=INSERT_RANDOM_NUMBER_HERE&n=a5c5554b' border='0' alt='' /></a>

08-11-2002	#3 (permalink)
WRFan CD Freaks Rookie Join Date: Dec 2001 Posts: 42	but all other burning programmes work fine. also all previous versions of clonecd worked fine. meaning it's a problem/bug with/in clonecd, not with my pc configuration. also about sharing: modern windows systems allow sharing. e.g., my soundcard and graphic card share the same IRQ, and no problems there

09-11-2002	#5 (permalink)
WRFan CD Freaks Rookie Join Date: Dec 2001 Posts: 42	the problem occurs only with clonecd. there's only one winxp driver for my scsi card, I've been using it without problems till now (it's an adaptec driver, the one on the winxp cd always resulted in buffer underruns when burning, but the new one works fine). I installed clonecd on my win98 partition and it works fine. but I am too lazy to reboot every time from winxp to win98 when I want to use clonecd. I have to fix the issue on winxp

09-11-2002	#7 (permalink)
Weshy CD Freaks Junior Member Join Date: Jul 2002 Location: The Land Down Under Posts: 76	Perhaps it's Clone CD's Virtual Drive? I know it uses some sysem resources. Perhaps its conflicting with something. Weshy.

09-11-2002	#8 (permalink)
WRFan CD Freaks Rookie Join Date: Dec 2001 Posts: 42	no, it's no a virtual drive problem. I tried to install without virtual drive, and still clonecd crashed winxp

09-11-2002	#9 (permalink)
Inertia CDFreaks Resident Join Date: Jan 2002 Posts: 1,508	At DRIVER_IRQL_NOT LESS OR EQUAL there is a 7 page VIA Arena Forum thread on this problem. Maybe some of the information contained in this forum discussion will be of benefit in troubleshooting your problem.

10-11-2002	#10 (permalink)
WRFan CD Freaks Rookie Join Date: Dec 2001 Posts: 42	no, they just talk about some weird problems with hardware in that forum. that's what happens when people are stupid enough to buy amd and via products - 7 pages full of whining. what do I care, I have an Intel processor. it's a clonecd bug. if I just knew which programme causes the conflict with clonecd. or rather vice versa - which programme clonecd doesn't like

11-11-2002	#12 (permalink)
ZardoZ New on Forum Join Date: Mar 2000 Posts: 3	I also have the same problem. I have 2 systems, both on XP SP-1. On one (a P4-2.4Ghz Dell 8200) it works 100%. On the other (a PII 450Mhz Dell Dimension R) it blue screens every time in the same way as the previous posts. Both systems had CloneCD updates from 4.0.1.10 to 4.1.0.1 without going via 4.1.0.0. Both worked fine on 4.0.1.10. This has to be a CloneCD bug of some kind which is triggered by other devices or software installed on the 450 system. And yes, I am a registered user of CloneCD, so it's not a "cracked" version....

11-11-2002	#14 (permalink)
jimsburnerbin CD Freaks Rookie Join Date: Apr 2002 Posts: 38	Too bad your Intel setup can't handle it. I have ccd's latest running on two different Amd setups. One with a XP 2100+ on a Asus board with a VIA chipset, and a 1.33G on a Asus board with an Amd chip. I have no problems running ccd, blindwrite, or anything else, I have 2 burners in each machine, along with Nic's, modems, and several USB items in each machine. One is used for work and one is used for my Ham Radio station. Both are running XP Pro SP1 Too bad your Superior Intel setup sucks so bad. Jim