Go Back   Club CDFreaks - Knowledge is Power > International Chat: Software related > Burning Software > Clone CD


Commercial message



Clone CD Discuss, Clone DVD freezes when writing should start at Burning Software forum; I wonder if I could ask your help with CloneDVD . A lot of the time I use CloneDVD, it writes the files, but freezes when it is supposed to begin writing to the media. It just says "setting up, erasing" and doesn't go any further. The DVD


Reply
 
Thread Tools
Old 20-09-2006   #1 (permalink)
New on Forum
 
Join Date: Sep 2006
Posts: 2
Clone DVD freezes when writing should start

I wonder if I could ask your help with CloneDVD. A lot of the time I use CloneDVD, it writes the files, but freezes when it is supposed to begin writing to the media. It just says "setting up, erasing" and doesn't go any further. The DVD Rom drive light blinks and the hard drive light stays on solid. Most of the time, I reboot the system and it works after that.

In an effort to remedy this problem, I have swapped DVD drives to ensure that it isn't a hardware problem. I have also performed a complete system restore to verify that it wasn't a software conflict. In addition, I have uninstalled AnyDVD and CloneDVD, and reinstalled them in an attempt to fix the problem.

I would greatly appreciate your help.

Thanks
willis8172 is offline   Reply With Quote
Old 20-09-2006   #2 (permalink)
Moderator, Editor & CD Freaks Guru
 
geno888's Avatar
 
Join Date: Jun 2005
Location: Italy
Posts: 17,534
Re: Clone DVD freezes when writing should start

Welcome to the forum

Can you give more details about your machine? What drives do you have and how are connected (I'm referring to master/slave settings)?

Do you have 80-wires IDE cables? What IDE drivers do you have installed on your computer?

What media are you using? A low quality media can cause such problems.

Do you have this problems only with clonedvd or anytime you try to burn something with any burning software?
geno888 is offline   Reply With Quote
Old 20-09-2006   #3 (permalink)
New on Forum
 
Join Date: Sep 2006
Posts: 2
Re: Clone DVD freezes when writing should start

My machine is a T6524. I've had very good luck with it. When I first got CloneDVD, it worked great. You mentioned media. I had great luck with Imation disks. I ran out of them and bought Phillips (they weren't good at all), then I bought Sony's, they seemed to be okay. As far as the master/slave setup, I think the DVDRom is Master and the CDRom is slave, but I'm not totally sure. Also, I'm really not sure about my IDE cables, I'd have to open the machine to find out. I don't know if it will help, but I've posted my system specs below.

Thanks you for your help.

CPU: AMD Athlon™ 64 3500+ Processor (64-bit with AMD64 Technology)
(2.20GHz, 2000MHz FSB, 512KB L2 cache)
Operating System: Genuine Microsoft® Windows® XP Media Center Edition 2005
Chipset: ATI® RS482
Memory: 1024MB DDR (2 × 512MB), 400MHz Dual Channel
Expandable to 4GB
Hard Drive: 200GB (7200rpm, 2MB cache)
Optical Drives: 16x DVD±RW multiformat double layer drive
48x CD-ROM drive
Media Reader: 8-in-1 digital media manager (Secure Digital™ (SD), Smart Media, Micro Drive, Memory Stick®, Memory Stick Pro®, Compact Flash, Mulitimedia Card, USB 2.0)
Video: ATI® Radeon® Xpress 200 (PCI-Express® )
Up to 128MB DDR shared video memory
PCI-Express® (PCI-E x16) slot available for upgrade
Sound: AC '97 Audio, Dolby 5.1 (6-channel)
Network: 10/100Mbps integrated Ethernet LAN
Modem: 56K ITU V.92-ready Fax/Modem
Peripherals: Premium Multimedia Keyboard, 2-Button Wheel Mouse, Amplified Stereo Speakers
Ports/Other: 7 USB 2.0 (2 in front, 4 in back, 1 in Media Reader), 2 IEEE 1394 (1 in front, 1 in back), 1 VGA external connector, 1 parallel, 2 PS/2, 5 audio ports (2 in front, 3 in back)
Dimensions: 14.25"H x 7.25"W x 16"D
Weight: 23lbs (PC only, no packaging)
willis8172 is offline   Reply With Quote
Old 20-09-2006   #4 (permalink)
Moderator, Editor & CD Freaks Guru
 
geno888's Avatar
 
Join Date: Jun 2005
Location: Italy
Posts: 17,534
Re: Clone DVD freezes when writing should start

Check if DMA is enabled, and also what IDE drivers are installed on your system.

http://club.cdfreaks.com/showthread.php?t=101616
geno888 is offline   Reply With Quote
 
Reply

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Clone DVD Freezes in Writing Mode Donaldo Newbie Forum 5 16-12-2006 05:55
Writing DVD, HDD in power-saving-mode came online and freezes system momentarily ... norm Asus / Pioneer Burner 5 22-10-2006 15:25
Can't get Clone DVD to start reading or writing walker1 CloneDVD 56 27-07-2005 14:25
Any Dvd and Nero Smart Start or Clone Dvd??? Cleary Newbie Forum 14 24-06-2005 20:18
Dvd writing Freezes pc Help Please Hkphooey CD and DVD Burners 1 17-08-2004 10:33


All times are GMT +2. The time now is 01:13.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.1.0