Clone-cd Lite-on 40125s - Club CDFreaks

k9cop · 27-04-2002

I have just upgraded my system to pentium 4, 1.8 ghz and 60 gig hard drive,384 megs of ram . I have lite-on set as master ,toshiba 6702B set as slave and hp 9310i on ide controller card set as slave, as this was my previous setup with no problems , I have just tried to backup mohaa using toshiba as my reader and lite-on as writer and made numerous coasters I also have dma unchecked firmware foe lite-on is ZSOA I am using clone-cd version 4,beta 30 any idea's would be appreciated. settings for clone where reader fast error skip/ hardware .writer close last session

snout · 27-04-2002

If you have the intel accelerator installed it might be worth removing that to start with then reboot your system then you will have DMA enabled.
try using your liteon for reading and writing- clone does not support AWS in usa i gather, but liteon does the correct efm ,
so you dont need aws on.
also slow down read and write options - read at x4 to start with burn at x16 see how you go but no reason why you should be able to do max settings.

hope this helps

k9cop · 27-04-2002

can you explain about the intel acellerator I have tried using the lite-on to read and write that was no good .

KickF · 27-04-2002

I know that the Intel Application Accelerator ( IAA ) have been known for making problem for CCD ... If I'm correct Olli had to make a fix for this in a CCD 3.x.x.x version ... there may be a problem in the 4.x.x.x version to ? I don't know ,but Olli sayed then that problem then was the IAA, and that is the source of the problem ... it may help if you uninstall it ,ore try the new 2.2 of IAA .. you can find that here : http://downloadfinder.intel.com/scri.../iaa22_enu.exe

Hope this helps

k9cop · 27-04-2002

well I tried that and thats a big negative

k9cop · 28-04-2002

I have uninstalled version 4.30 and installed version 3341 and all works it has to be something in the new version by the way I have the new version of intel app accellerator installed it works for version 3341 but not the 4.30

ant4bud · 28-04-2002

Quote:

I have just upgraded my system to pentium 4, 1.8 ghz and 60 gig hard drive,384 megs of ram

Off topic but how are you liking your processor, overall? Because I'm not sure about getting an Intel. Also what motherboard do you have? Thanks

k9cop · 29-04-2002

I have only had it a week but seems to be working fine ,faster then my p3 450 in a heart beat,motherboard is the ABIT BL7-RAID I have the G-Force 4 TI 4600 128mb video card it is great, 384 megs of ram ,along with my motorola cable modem surfboard SB4100 system over all is great.

27-04-2002	#1 (permalink)
k9cop CD Freaks Senior Member Join Date: Mar 2001 Location: USA, NJ Posts: 398	Clone-cd Lite-on 40125s HELP <a href='http://adstats.cdfreaks.com/www/delivery/ck.php?n=a13febf7&cb=INSERT_RANDOM_NUMBER_HERE' target='_blank'><img src='http://adstats.cdfreaks.com/www/delivery/avw.php?zoneid=30&cb=INSERT_RANDOM_NUMBER_HERE&n=a13febf7' border='0' alt='' /></a> I have just upgraded my system to pentium 4, 1.8 ghz and 60 gig hard drive,384 megs of ram . I have lite-on set as master ,toshiba 6702B set as slave and hp 9310i on ide controller card set as slave, as this was my previous setup with no problems , I have just tried to backup mohaa using toshiba as my reader and lite-on as writer and made numerous coasters I also have dma unchecked firmware foe lite-on is ZSOA I am using clone-cd version 4,beta 30 any idea's would be appreciated. settings for clone where reader fast error skip/ hardware .writer close last session Last edited by k9cop; 28-04-2002 at 00:08.

27-04-2002	#2 (permalink)
snout CD Freaks Member Join Date: Apr 2002 Location: uk Posts: 180	try this If you have the intel accelerator installed it might be worth removing that to start with then reboot your system then you will have DMA enabled. try using your liteon for reading and writing- clone does not support AWS in usa i gather, but liteon does the correct efm , so you dont need aws on. also slow down read and write options - read at x4 to start with burn at x16 see how you go but no reason why you should be able to do max settings. hope this helps __________________ The need for speed !! DFI Lanparty sli d AMD 3500+ 64 venice 1gb OCZ VX Extreme memory Zalman HSF Cu 7000 GEFORCE 6800 ultra S/BLASTER AUDIGY CREATIVE 5300 SPEAKERS Samsung 352b DVDROM/Combo LITY 832s

27-04-2002	#4 (permalink)
KickF CD Freaks Senior Member Join Date: Nov 2001 Location: Norway Posts: 455	IAA ( Intel Application Accelerator ) I know that the Intel Application Accelerator ( IAA ) have been known for making problem for CCD ... If I'm correct Olli had to make a fix for this in a CCD 3.x.x.x version ... there may be a problem in the 4.x.x.x version to ? I don't know ,but Olli sayed then that problem then was the IAA, and that is the source of the problem ... it may help if you uninstall it ,ore try the new 2.2 of IAA .. you can find that here : http://downloadfinder.intel.com/scri.../iaa22_enu.exe Hope this helps __________________ Need to know more about me ? Read My Blog KickF BLOG over at OPERA Community --------------------------------------------------- Pivot_root: No such file or directory /sbin/init: 428: Cannot open dev/console: No such file Kernel panic - not syncing: Attempting to kill init! My favorite Quote: Was it love , ore was it the idea of been in Love

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Lite-On LTR 40125S and CD-RW 24x	orentos	LiteOn / PLDS/ Sony Burner	2	10-08-2003 23:31
best media for lite-on 40125s + nero to make audio cd?	number9	Audio	6	03-12-2002 12:43
Which CD-R/RW media best suits my Lite-on LTR 40125S	mesut	Blank Media	2	25-10-2002 06:14
Lite-ON LTR 40125s en CD-R	wmf600	Dutch: De Woonkamer	1	24-10-2002 10:42
Clone-cd 3341/ Lite-on 40125S	k9cop	LiteOn / PLDS/ Sony Burner	4	06-04-2002 18:32

Commercial message
<a href='http://adstats.cdfreaks.com/www/delivery/ck.php?n=a5c5554b&cb=INSERT_RANDOM_NUMBER_HERE' target='_blank'><img src='http://adstats.cdfreaks.com/www/delivery/avw.php?zoneid=29&cb=INSERT_RANDOM_NUMBER_HERE&n=a5c5554b' border='0' alt='' /></a>

27-04-2002	#3 (permalink)
k9cop CD Freaks Senior Member Join Date: Mar 2001 Location: USA, NJ Posts: 398	can you explain about the intel acellerator I have tried using the lite-on to read and write that was no good .

27-04-2002	#5 (permalink)
k9cop CD Freaks Senior Member Join Date: Mar 2001 Location: USA, NJ Posts: 398	well I tried that and thats a big negative

28-04-2002	#6 (permalink)
k9cop CD Freaks Senior Member Join Date: Mar 2001 Location: USA, NJ Posts: 398	I have uninstalled version 4.30 and installed version 3341 and all works it has to be something in the new version by the way I have the new version of intel app accellerator installed it works for version 3341 but not the 4.30

29-04-2002	#8 (permalink)
k9cop CD Freaks Senior Member Join Date: Mar 2001 Location: USA, NJ Posts: 398	I have only had it a week but seems to be working fine ,faster then my p3 450 in a heart beat,motherboard is the ABIT BL7-RAID I have the G-Force 4 TI 4600 128mb video card it is great, 384 megs of ram ,along with my motorola cable modem surfboard SB4100 system over all is great.