VIDEO_TS rip on HDD | Using ImgBurn to burn | Does not seem to work - Club CDFreaks

RJNJC · 01-04-2008

Burning from VIDEO_TS folders using Imgburn
I read up on that and seems to be easy. But not so when I tried it. Just added to my coaster collection!

I tried to burn a DVD from a rip (film: Shawshank R..), stored on my HDD in VIDEO_TS folder, using Imgburn.

It didnt work and all I got out of it is a lousy coaster!

Help!

beef barley · 01-04-2008

ImgBurn creates a log, why don't you post it. BTW if you were trying to make this a link, it didn't work.

Quote:

Burning from VIDEO_TS folders using Imgburn

troy512 · 01-04-2008

please use build mode. have you read the official *cough*

guides from Lighting UK! and cornholio7 ?

How to write DVD Video (IFO/BUP/VOB) files to a double layer disc
http://forum.imgburn.com/index.php?showtopic=4643

Burning DVD Video files directly to single layer media with ImgBurn
http://forum.imgburn.com/index.php?showtopic=4632

as beef barley asked, please post the burn log.

edit// from your other thread you asked "I wanted to know if there any specific settings I should pay attention to before doing a burn from VIDEO_TS to DVD." no you should not have to change anything. (except burn speed)

blutach · 01-04-2008

Check media, firmware, write speed, DMA.

Regards

RJNJC · 01-04-2008

Quote:

Originally Posted by beef barley

ImgBurn creates a log, why don't you post it. BTW if you were trying to make this a link, it didn't work.

@ beef barley: I've taken the part of the log which I believe relates to the burn in question.

And no, that was just to label or highlight the topic of my query. Wasn't sposed to be a hyperlink.

Quote:

Originally Posted by troy512

please use build mode. have you read the official *cough*

guides from Lighting UK! and cornholio7 ?

How to write DVD Video (IFO/BUP/VOB) files to a double layer disc
http://forum.imgburn.com/index.php?showtopic=4643

Burning DVD Video files directly to single layer media with ImgBurn
http://forum.imgburn.com/index.php?showtopic=4632

as beef barley asked, please post the burn log.

edit// from your other thread you asked "I wanted to know if there any specific settings I should pay attention to before doing a burn from VIDEO_TS to DVD." no you should not have to change anything. (except burn speed)

@Troy:
I did follow the guides. On reading it, and the way the guides are laid out, it appeared to be pretty easy. So easy even I could manage it!! But I hit a snag somewhere.

Here is the log:

Code:

I 14:36:08 Operation Started!
I 14:36:08 Building Image Tree...
I 14:36:09 Checking Directory Depth...
I 14:36:09 Calculating Totals...
I 14:36:09 Preparing Image...
I 14:36:09 Checking Path Length...
I 14:36:09 Contents: 1 File, 0 Folders
I 14:36:09 Size: 6,144 bytes
I 14:36:09 Sectors: 3
I 14:36:09 Image Size: 1,245,184 bytes
I 14:36:09 Image Sectors: 608
I 14:36:19 Operation Successfully Completed! - Duration: 00:00:10
I 14:36:19 Operation Started!
I 14:36:19 Source File: -==/\/[BUILD IMAGE]\/\==-
I 14:36:19 Source File Sectors: 608 (MODE1/2048)
I 14:36:19 Source File Size: 1,245,184 bytes
I 14:36:19 Source File Volume Identifier: Shawshank
I 14:36:19 Source File Application Identifier: IMGBURN V2.4.0.0 - THE ULTIMATE IMAGE BURNER!
I 14:36:19 Source File Implementation Identifier: ImgBurn
I 14:36:19 Source File File System(s): ISO9660, UDF (1.02)
I 14:36:19 Destination Device: [0:0:0] Optiarc DVD+-RW AD-5560A DD11 (D:) (ATA)
I 14:36:19 Destination Media Type: DVD+R (Disc ID: SONY-D21-00) (Speeds: 2.4x, 4x, 6x, 8x)
I 14:36:19 Destination Media Sectors: 2,295,104
I 14:36:19 Write Mode: DVD
I 14:36:19 Write Type: DAO
I 14:36:19 Write Speed: MAX
I 14:36:19 Link Size: Auto
I 14:36:19 Test Mode: No
I 14:36:19 OPC: Yes
I 14:36:19 BURN-Proof: Enabled
I 14:36:22 Book Type Setting: N/A
I 14:36:30 Filling Buffer... (40 MB)
I 14:36:30 Writing LeadIn...
I 14:36:35 Writing Session 1 of 1... (1 Track, LBA: 0 - 607)
I 14:36:35 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 607)
I 14:36:35 Synchronising Cache...
I 14:36:40 Closing Track...
I 14:36:43 Finalising Disc...
I 14:40:08 Exporting Graph Data...
I 14:40:08 Graph Data File: C:\Documents and Settings\RJ\Application Data\ImgBurn\IBG Files\Optiarc_DVD+-RW_AD-5560A_DD11_MONDAY-MARCH-31-2008_2-36_PM_SONY-D21-00_MAX.ibg
I 14:40:08 Export Successfully Completed!
I 14:40:08 Operation Successfully Completed! - Duration: 00:03:48
I 14:40:08 Average Write Rate: N/A - Maximum Write Rate: N/A
I 14:41:39 Close Request Acknowledged
I 14:41:39 Closing Down...
I 14:41:40 Shutting down SPTI...
I 14:41:40 ImgBurn closed!

blutach · 01-04-2008

Quote:

I 14:36:09 Contents: 1 File, 0 Folders
I 14:36:09 Size: 6,144 bytes

Quote:

I 14:36:09 Image Size: 1,245,184 bytes

Something is badly wrong with your image. It is only 1Mb. There's no video in there!

You need to drag the VIDEO_TS folder containing all your project's IFO, VOB and BUP files onto the ImgBurn Build mode GUI. And go from there. (It appears you have only dragged the 6kb VIDEO_TS.IFO file there).

Also, remember to verify your burn.

Regards

RJNJC · 01-04-2008

Quote:

Originally Posted by blutach

Something is badly wrong with your image. It is only 1Mb. There's no video in there!

Regards

I thought that the size was too small and also the time it took to 'burn' seemed to be too short also.

The question is, what did I do wrong?

Quote:

PS: I just had another look at the folder.

The Shawshank folder shows:

VIDEO_TS BUP 6kb

VIDEO_TS IFO 6kb

VTS_01_1 4,570,958 kb

I ran the burn from the IFO.

RJNJC · 01-04-2008

Quote:

Originally Posted by blutach

You need to drag the VIDEO_TS folder containing all your project's IFO, VOB and BUP files onto the ImgBurn Build mode GUI. And go from there. (It appears you have only dragged the 6kb VIDEO_TS.IFO file there).

Yup!
That's where my error is.
Thanks!

RJNJC · 01-04-2008

Seems to be a jinx on my Shawshank burn experiment!
I think now I have a handle on the process of burning DVD from IFO/VOB/BUP files.
But now ImgBurn throws up a 'size too big' error'

Here's the log, if that helps. Is there anyway I can get this rip VIDEO_TS to a DVD?

Code:

I 11:41:27 ImgBurn Version 2.4.0.0 started!
I 11:41:27 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)
I 11:41:27 Total Physical Memory: 1,038,452 KB  -  Available: 257,036 KB
I 11:41:29 Initialising SPTI...
I 11:41:29 Searching for SCSI / ATAPI devices...
I 11:41:29 Found 1 DVD±RW!
I 11:41:58 Operation Started!
I 11:41:58 Building Image Tree...
I 11:41:58 Checking Directory Depth...
I 11:41:58 Calculating Totals...
I 11:41:58 Preparing Image...
E 11:42:02 Operation Failed! - Duration: 00:00:03
I 11:42:04 Close Request Acknowledged
I 11:42:04 Closing Down...
I 11:42:06 Shutting down SPTI...
I 11:42:06 ImgBurn closed!

I just might have to redo the rip all over again and then burn it on the DVD.

troy512 · 01-04-2008

i think you need to re-read this guide. seems you didnt use the calculator. also if you rip with dvdfab the movie will be compressed to fit a SL dvd. so just use all default settings for imgburn (expect 8x write speed). if you follow my video for dvdfab and imgburn you only have to change three settings in imgburn.

imgburn guide
http://forum.imgburn.com/index.php?showtopic=4632

dvdfab and imgburn video
http://youtube.com/watch?v=fsE5m62FcSE

RJNJC · 01-04-2008

Quote:

Originally Posted by troy512

also if you rip with dvdfab the movie will be compressed to fit a SL dvd.

All my rips which are currently in 'folders' had been done before I got 'clever' with DVD Shrink and DVDDecrypter etc. Then DVDFab found me!

A number of the old rips are too big.

Thanks for your help though.

troy512 · 02-04-2008

no problem.

there are alot of nice people around cdfreaks. if you have other questions dont hesitate to ask.

also visit the media and drive forums.

troy

VideoRoy · 03-04-2008

Quote:

Originally Posted by RJNJC

All my rips which are currently in 'folders' had been done before I got 'clever' with DVD Shrink and DVDDecrypter etc. Then DVDFab found me!

A number of the old rips are too big.

Thanks for your help though.

Glad to see you made it over here!

You probably already know but just in case, you can use DVDFab or Shrink to make the video fit on SL discs from the files you have ripped to the hard drive.

blutach · 03-04-2008

Quote:

PS: I just had another look at the folder.

The Shawshank folder shows:

VIDEO_TS BUP 6kb
VIDEO_TS IFO 6kb
VTS_01_1 4,570,958 kb
I ran the burn from the IFO.

This is not a DVD compliant project.

1. There is no IFO for VTS 1
2. The VOBs should be 1Gb max (1.048,574 kb)

Only God knows how you made it, but don't bother burning it. It won't work.

Start again from scratch: Rip --> Transcode --> Burn

Regards

RJNJC · 07-04-2008

Thanks! Even so!
Back to square 1 and try and get it right this time around!

01-04-2008	#1 (permalink)
RJNJC New on Forum Join Date: Mar 2008 Posts: 16	VIDEO_TS rip on HDD \| Using ImgBurn to burn \| Does not seem to work <a href='http://adstats.cdfreaks.com/www/delivery/ck.php?n=a13febf7&cb=INSERT_RANDOM_NUMBER_HERE' target='_blank'><img src='http://adstats.cdfreaks.com/www/delivery/avw.php?zoneid=30&cb=INSERT_RANDOM_NUMBER_HERE&n=a13febf7' border='0' alt='' /></a> Burning from VIDEO_TS folders using Imgburn I read up on that and seems to be easy. But not so when I tried it. Just added to my coaster collection! I tried to burn a DVD from a rip (film: Shawshank R..), stored on my HDD in VIDEO_TS folder, using Imgburn. It didnt work and all I got out of it is a lousy coaster! Help!

01-04-2008	#3 (permalink)
troy512 CD Freak Join Date: Mar 2007 Location: Kissing OPEC Posts: 2,302	Re: VIDEO_TS rip on HDD \| Using ImgBurn to burn \| Does not seem to work please use build mode. have you read the official cough guides from Lighting UK! and cornholio7 ? How to write DVD Video (IFO/BUP/VOB) files to a double layer disc http://forum.imgburn.com/index.php?showtopic=4643 Burning DVD Video files directly to single layer media with ImgBurn http://forum.imgburn.com/index.php?showtopic=4632 as beef barley asked, please post the burn log. edit// from your other thread you asked "I wanted to know if there any specific settings I should pay attention to before doing a burn from VIDEO_TS to DVD." no you should not have to change anything. (except burn speed) __________________ Please do yourself a favor and only use Taiyo Yuden and Verbatim media. Please use ImgBurn The Ultimate Image Burner! and dont forget to Donate. Please read the F.A.Q. for PC DVD Writers and Media FAQ Please view my DVDFab Video Tutorials Please look at the Pioneer & MCSE Patching Guide Please join the CD Freaks Folding@Home Team Check out the CD Freaks Team Stats.

01-04-2008	#4 (permalink)
blutach CD Freaks Senior Member Join Date: Jun 2006 Location: Melbourne, Australia Posts: 806	Re: VIDEO_TS rip on HDD \| Using ImgBurn to burn \| Does not seem to work Check media, firmware, write speed, DMA. Regards __________________ Les

01-04-2008	#10 (permalink)
troy512 CD Freak Join Date: Mar 2007 Location: Kissing OPEC Posts: 2,302	Re: VIDEO_TS rip on HDD \| Using ImgBurn to burn \| Does not seem to work i think you need to re-read this guide. seems you didnt use the calculator. also if you rip with dvdfab the movie will be compressed to fit a SL dvd. so just use all default settings for imgburn (expect 8x write speed). if you follow my video for dvdfab and imgburn you only have to change three settings in imgburn. imgburn guide http://forum.imgburn.com/index.php?showtopic=4632 dvdfab and imgburn video http://youtube.com/watch?v=fsE5m62FcSE __________________ Please do yourself a favor and only use Taiyo Yuden and Verbatim media. Please use ImgBurn The Ultimate Image Burner! and dont forget to Donate. Please read the F.A.Q. for PC DVD Writers and Media FAQ Please view my DVDFab Video Tutorials Please look at the Pioneer & MCSE Patching Guide Please join the CD Freaks Folding@Home Team Check out the CD Freaks Team Stats.

02-04-2008	#12 (permalink)
troy512 CD Freak Join Date: Mar 2007 Location: Kissing OPEC Posts: 2,302	Re: VIDEO_TS rip on HDD \| Using ImgBurn to burn \| Does not seem to work no problem. there are alot of nice people around cdfreaks. if you have other questions dont hesitate to ask. also visit the media and drive forums. troy __________________ Please do yourself a favor and only use Taiyo Yuden and Verbatim media. Please use ImgBurn The Ultimate Image Burner! and dont forget to Donate. Please read the F.A.Q. for PC DVD Writers and Media FAQ Please view my DVDFab Video Tutorials Please look at the Pioneer & MCSE Patching Guide Please join the CD Freaks Folding@Home Team Check out the CD Freaks Team Stats.

07-04-2008	#15 (permalink)
RJNJC New on Forum Join Date: Mar 2008 Posts: 16	Re: VIDEO_TS rip on HDD \| Using ImgBurn to burn \| Does not seem to work Thanks! Even so! Back to square 1 and try and get it right this time around!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ISO rip on HDD \| Using DVDFabPlatinum to burn \| Does not seem to work	RJNJC	DVDFab / DVD Region+CSS Free	12	01-04-2008 03:04
This shows how to burn a VIDEO_TS folder in ImgBurn 2.1.0.0	BeardedKirklander	ImgBurn	9	07-12-2007 02:31
How to compress and burn a VIDEO_TS folder in ImgBurn or other software onto 1 dvd?	newbie007	Newbie Forum	4	06-12-2006 00:56
Burning .iso image files or video_ts folder to work in standalone player.	Trav303	Newbie Forum	4	19-06-2006 04:07

Commercial message