Ridata Full Hub DVD-R 8X printing dimensions! Anyone has them??? - Club CDFreaks

Dan_Aykroyd · 04-08-2007

Hi!

Do somebody has measured or has these? I'm printing those discs on an Epson R270 and some ink sprays outside the blank area (the plastic-outer border), and also inside the plastic ring inside. All this using the default template that came with SureThing for the Epson R series.

These are the ones I got:

Please, let me know! Thanks

*CDan* · 04-08-2007

If it's over-printing, just decrease the outer dimension by 1mm and try again. Most are either 118 or 119mm, but some are a bit smaller.

Cressida · 05-08-2007

Don't you have a ruler and calculator?

Try to remember: one inch is 25.4 millimeters - you can round off to the nearest mm.

http://encarta.msn.com/media_7015006...n_Factors.html

*getit29* · 06-08-2007

Those are most likely 21mm inner and 119mm outer. I just hope you're not going to
be putting anything that is irreplaceable on those Ridata disc's they are well known
to become unreadable after a short time.

*NBK* · 06-08-2007

Hi

Are those the infamous G05's?

NBK

04-08-2007	#1 (permalink)
Dan_Aykroyd New on Forum Join Date: Aug 2007 Posts: 1	Ridata Full Hub DVD-R 8X printing dimensions! Anyone has them??? Hi! Do somebody has measured or has these? I'm printing those discs on an Epson R270 and some ink sprays outside the blank area (the plastic-outer border), and also inside the plastic ring inside. All this using the default template that came with SureThing for the Epson R series. These are the ones I got: Please, let me know! Thanks

04-08-2007	#2 (permalink)
CDan CDFreaks Resident Join Date: Mar 2005 Location: USA Posts: 2,804	Re: Ridata Full Hub DVD-R 8X printing dimensions! Anyone has them??? If it's over-printing, just decrease the outer dimension by 1mm and try again. Most are either 118 or 119mm, but some are a bit smaller.

05-08-2007	#3 (permalink)
Cressida CD Freak Join Date: Mar 2006 Location: Almost there Posts: 4,444	Re: Ridata Full Hub DVD-R 8X printing dimensions! Anyone has them??? Don't you have a ruler and calculator? Try to remember: one inch is 25.4 millimeters - you can round off to the nearest mm. http://encarta.msn.com/media_7015006...n_Factors.html

06-08-2007	#4 (permalink)
getit29 CDFreaks Resident Join Date: Sep 2004 Location: Standing Right behind you Posts: 1,082	Re: Ridata Full Hub DVD-R 8X printing dimensions! Anyone has them??? Those are most likely 21mm inner and 119mm outer. I just hope you're not going to be putting anything that is irreplaceable on those Ridata disc's they are well known to become unreadable after a short time.

06-08-2007	#5 (permalink)
NBK CDFreaks Resident Join Date: Sep 2005 Location: North Carolina USA Posts: 719	Re: Ridata Full Hub DVD-R 8X printing dimensions! Anyone has them??? Hi Are those the infamous G05's? NBK

Today
CD Freaks	__________________ This advertising will not be shown to registered members. Register your free account today and become a member on Club CD Freaks - Knowledge is Power

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Roxio Easy Media 7 and printing on DVD hub	Gsully	Burning Software	1	30-01-2007 13:06
Primera Bravo, Hub printing?	DOLL_8468	CD & DVD Printing and Labeling	2	22-09-2006 03:23
Printing on HUB Printable Disk with Epson R-340	doug2255	CD & DVD Printing and Labeling	8	05-09-2006 22:50
Printing all the way to hub? How?	CrazyFoo	Newbie Forum	3	07-03-2006 05:54
Hub Printable (Full Face) Taiyo Yuden 8X DVD+Rs	epineda	Blank Media	11	02-03-2005 03:13

Commercial ads