ip4300 - how to print cd? - Club CDFreaks

rac12 · 15-08-2007

Hi, I bought a canon ip4300, but don't have the disc that contains the drivers. I downloaded driver from canon + easyphoto + layout print. There's a tray in the package (Mexico here) so I guess no firmware modification is needed.

I tried to print from nero coverdesign, but haven't yet managed to print, it complains that printer was open. After a small search saw another post that states I need to wait until printer ask for cd tray to be inserted, I can't get into that specific part yet!

What are the correct steps to print? I selected

size: cdr-trayf and as
origin:

auto sheet feeder
cassette
continuous atuofeed
paper allocation
paper feed switch

but it complains the printer is out of paper.

Any help please?

*weedougie* · 16-08-2007

Try using canons cd label print software, if the outer is greater than 118mm then you will have to use nero or another third party software. Don't forget to set the inner and outer diameter in prefs (file/paper size) measure the disc before you start.. In media type you must select printable disc for the system to work.
Hope this helps.
PS welcome to the site.

jflan · 16-08-2007

Welcome to CDFreaks !

The easiest way to get started is to use the Canon-provided app called CDLabelPrint.
It should have come with your software package.
If not, grab it here:
http://software.canon-europe.com/sof...386.asp?model=

*CDan* · 16-08-2007

Also be sure that the tray is selected on the 2nd print dialog tab, "page setup" under the "page size" drop-down.

rac12 · 16-08-2007

Hi, thanks to everyone. Weedougie, thank you for the welcome.

I downloaded canon's cd label print and it worked without problems. What I wonder is why I wasn't able to use the:

"paper source: disc tray" From Nero.

I printed my first dvd and am quite happy with the results, tho can be addictive to have custom dvds now.

Anyway, does someone know why disc tray isn't listed in other applications?

Thank you.

jflan · 17-08-2007

With Nero, try going into your printer's Properties first and make the correct selections there, then go to Nero.
You should see something like "Printable Disk" (media) and CD Tray (source)

15-08-2007	#1 (permalink)
rac12 New on Forum Join Date: Aug 2007 Posts: 2	ip4300 - how to print cd? Hi, I bought a canon ip4300, but don't have the disc that contains the drivers. I downloaded driver from canon + easyphoto + layout print. There's a tray in the package (Mexico here) so I guess no firmware modification is needed. I tried to print from nero coverdesign, but haven't yet managed to print, it complains that printer was open. After a small search saw another post that states I need to wait until printer ask for cd tray to be inserted, I can't get into that specific part yet! What are the correct steps to print? I selected size: cdr-trayf and as origin: auto sheet feeder cassette continuous atuofeed paper allocation paper feed switch but it complains the printer is out of paper. Any help please?

16-08-2007	#2 (permalink)
weedougie CDFreaks Resident Join Date: Aug 2004 Location: England Posts: 1,088	Re: ip4300 - how to print cd? Try using canons cd label print software, if the outer is greater than 118mm then you will have to use nero or another third party software. Don't forget to set the inner and outer diameter in prefs (file/paper size) measure the disc before you start.. In media type you must select printable disc for the system to work. Hope this helps. PS welcome to the site. __________________ People will often expend more time and energy avoiding work or the task before them than it would take to do it.

16-08-2007	#3 (permalink)
jflan CD Freaks Senior Member Join Date: Jun 2007 Location: Vancouver, WA Posts: 525	Re: ip4300 - how to print cd? Welcome to CDFreaks ! The easiest way to get started is to use the Canon-provided app called CDLabelPrint. It should have come with your software package. If not, grab it here: http://software.canon-europe.com/sof...386.asp?model=

16-08-2007	#4 (permalink)
CDan CDFreaks Resident Join Date: Mar 2005 Location: USA Posts: 2,804	Re: ip4300 - how to print cd? Also be sure that the tray is selected on the 2nd print dialog tab, "page setup" under the "page size" drop-down.

16-08-2007	#5 (permalink)
rac12 New on Forum Join Date: Aug 2007 Posts: 2	Re: ip4300 - how to print cd? Hi, thanks to everyone. Weedougie, thank you for the welcome. I downloaded canon's cd label print and it worked without problems. What I wonder is why I wasn't able to use the: "paper source: disc tray" From Nero. I printed my first dvd and am quite happy with the results, tho can be addictive to have custom dvds now. Anyway, does someone know why disc tray isn't listed in other applications? Thank you.

Today
CD Freaks	__________________ This advertising will not be shown to registered members. Register your free account today and become a member on Club CD Freaks - Knowledge is Power

17-08-2007	#6 (permalink)
jflan CD Freaks Senior Member Join Date: Jun 2007 Location: Vancouver, WA Posts: 525	Re: ip4300 - how to print cd? With Nero, try going into your printer's Properties first and make the correct selections there, then go to Nero. You should see something like "Printable Disk" (media) and CD Tray (source)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ritek Ridata + CD Label Print+Canon Pixma IP4300 help	esmiux	CD & DVD Printing and Labeling	3	29-09-2008 12:18
Canon ip4300 - possible to print with Acrobat?	margster	CD & DVD Printing and Labeling	6	30-08-2007 17:30
Canon IP4300 cd-r tray problem	superjim	CD & DVD Printing and Labeling	10	06-05-2007 17:02
Canon iP4300 CD/DVD Print Quality?	SiNRa	CD & DVD Printing and Labeling	17	24-03-2007 23:44
CD Print Covers	LeFugitive	CD Freaks Living Room	2	19-06-2001 14:43

Commercial ads