Help with cd-labelprint - Page 3 - Club CDFreaks

rp001 · 21-02-2007

I had to buy Acoustica CD/DVD label print 3.04. It allowed changing the outer diameter to 119mm for the verbatim printables. I don't even use the canon software anymore. I tried using a cracked version but liked the software enough to pay the $20 or so dollars for it.

emmjay · 15-03-2007

Gary,

You da man!

I was going crazy on this one, even cotemplating writing to Canon and some such. Work's a treat. Got some discs with an inner diameter of 22mm so changed registery to -210, voila.

I guess the only thing to be wary of (as you point out) is because its a relative change, if you've previously altered the default 43mm (as I had), you need to keep that in mind.

Cheers,

Emmjay

Quote:

Originally Posted by bendarl

Here is what you need to know.I found the following info when I was doing a search a while back.All I have done is setup a couple of different Reg files and it makes it easy to change from one setting to the other.
There is a bug in the CD printing application though, ironically the same as
the Epson PrintCD application. It states the inner diameter can not be less
than 17mm, however you can only adjust the inner diameter up and down 10mm
from the default 43mm, making the minimum diameter usable through this
interface 33mm. As I need down to 20mm with my stock of Pioneer media, I
found the solution is the same as with the Epson. You have to modify the
registry manually:

The key to change is:
[HKEY_CURRENT_USER\Software\MediaNavigation\CDLabelPrint\1.0\Settings\SizeAd
just\.Standard CD (12cm)]

Change the "Inner" value to the number of mm times 10, use negative for
smaller. Its relative to 43mm. For example, to adjust 23mm smaller (giving
20mm bore) change: "Inner" to -230.

Then in CD-Label, open the "Adjust Circle Size", then select ok (don't
change anything). Change made! This does not work with the Outer diameter.

Regards Gary

Cressida · 15-03-2007

Whoa guys! Stop fiddling with the registry!

Here's the easy way to do it:

emmjay · 16-03-2007

Great advice! Thanks to both you guys...

Quote:

Originally Posted by Cressida

Whoa guys! Stop fiddling with the registry!

Here's the easy way to do it:

basurvivor · 26-03-2007

Where and what settings need to be changed in Epson PrintCD to make this work??

Thanks

davidw89 · 30-05-2007

Quote:

Originally Posted by Cressida

Whoa guys! Stop fiddling with the registry!

Here's the easy way to do it:

yes we know but the outer ring is set to a max of 118..we want it to be 119..

Cressida · 30-05-2007

Quote:

Originally Posted by davidw89

yes we know but the outer ring is set to a max of 118..we want it to be 119..

You can never achieve this with CD-LabelPrint, not even with a registry-hack

. You have to use other software.

davidw89 · 15-06-2007

Quote:

Originally Posted by Cressida

You can never achieve this with CD-LabelPrint, not even with a registry-hack

. You have to use other software.

I dont get why they limit it to 118
jesus
i like the software..it works with everything else BUT this

Cressida · 15-06-2007

Quote:

Originally Posted by davidw89

I dont get why they limit it to 118
jesus
i like the software..it works with everything else BUT this

I actually don't mind any more

. The secret here is in perfect alignment, so you'll get a uniform hair-thin lining around the printed area, which accentuates the label

Two or three test prints should allow you to perfectly center the labels and find the correct offsets. No more wiping off excess ink from the non-printable edge of the disc (which never dries otherwise). I now set the inner diameter to 20 mm (in stead of 19) for Verbatim as well.

richardcannon · 07-09-2007

I am using CD-LabelPrint 1.3 that came with my Canon IP4300 printer. Generally I think it is very good BUT it really bugs me that I can't get text to wrap and have to enter manual new lines. Am I missing some thing or won't it word wrap.
Any ideas would be appreciated.

I have found that if an image is copied in an image editing program and pasted into LabelPrint the file size is very much bigger than adding a JPEG image file.

splice · 15-09-2007

Hi would like to know if kev 1952 is still around don't see any post of his lately? I would like to get in touch with hin on some problems with my canon printer. thanks splice

**Arachne** · 15-09-2007

@splice - One thread/post is enough about getting in touch with the user. Bump your thread if necessary, but please don't post the same request in other threads.

Further posts of the same will be removed.

splice · 15-09-2007

Sorry about the double post but had no reply's in the other post ,and I had his name wrong had it kev 51 instead of kev 1952 so tryed to correct in this forum. splice

**Arachne** · 15-09-2007

Quote:

Originally Posted by splice

Sorry about the double post but had no reply's in the other post ,and I had his name wrong had it kev 51 instead of kev 1952 so tryed to correct in this forum. splice

I'll correct the name in the post for you. In future, just post to the thread you made with "Bump" - that will bring the thread back to the top.

triaxle · 18-07-2008

Cheers mate worked a treat.

Quote:

Originally Posted by xB^

Hey there.

Why all this bother ? none if this is really necesary, and yes u can set inner diameter to 17 mm.

Here is the EASY solution :

When in cd label print , do the following :

1. Go to File menu , and press "Select paper.."

2. When there, press the "New" tag on the bottom .. then
u get a new "label profile setup.

3. Name it e.g Verbatim Fullface, set Inner diameter to 21 mm , and
outer diameter to 118 (sadly it cant be anythin greater than 118 .. but verbatim fullface shoud be 119 mm) so this is a problem i'm workin on myself.

4. Now u can print fullface labels, without any tweaks. and yeah the +/- adjustments is max 10 mm on the selected profile.. but when u make a new one , u never have to adjust (only if u use different discs.. just make a workin profile for every disc)

Hope this helps out more.

But if anyone know how to get the app to print 119 mm outer size, THAT would be very helpful..

- xB^

bandit13 · 20-07-2008

Hi, it is possible to print full face in CD LabelPrint.

It requires editing the regedit, follow these steps.

Click Start->Run-> type "regedit" and click ok.

Then click and navigate to:

HKEY_CURRENT_USER\Software\MediaNavigation\CDLabel Print\1.0\Settings\SizeAdjust\.Standard CD (12cm)

When you click on .Standard CD (12cm) three values appear on the right hand side. Double click Inner and change it to -200 and make outer 20, then close regedit.

When you now open CD LabelPrint the full face will be printable.

NOTE! DON'T CLICK THE ADJUST ADJUST CIRCLE SIZE BUTTON IN CD LABEL PRINT OR THE VALUES WILL BE RESET!!!!

Hope this helps!

jflan · 22-07-2008

bandit13,

I'm not a CDLP user, but if your Registry edit works, there will be many dry eyes in the CDLP camp.
Thanks for posting it.

*CDan* · 22-07-2008

Quote:

Originally Posted by jflan

bandit13,

I'm not a CDLP user, but if your Registry edit works, there will be many dry eyes in the CDLP camp.
Thanks for posting it.

I might be smarter to just use the provided tools in CDLP to print any type disc, full face or not. Registry changes are not needed.

thomm · 3 Days Ago

how about a little more info on perfect alinment, when i go to crop the image, it gets way too big, there must be another way to increase the size of the image just a little at a time

*CDan* · 3 Days Ago

Quote:

Originally Posted by thomm

how about a little more info on perfect alinment, when i go to crop the image, it gets way too big, there must be another way to increase the size of the image just a little at a time

If you're trying to make an image fill the entire disc, simply insert it as a background. It won't matter what size it is.

21-02-2007	#41 (permalink)
rp001 New on Forum Join Date: Sep 2004 Posts: 4	Re: Help with cd-labelprint I had to buy Acoustica CD/DVD label print 3.04. It allowed changing the outer diameter to 119mm for the verbatim printables. I don't even use the canon software anymore. I tried using a cracked version but liked the software enough to pay the $20 or so dollars for it.

26-03-2007	#45 (permalink)
basurvivor New on Forum Join Date: Jan 2005 Posts: 22	Re: Help with cd-labelprint Where and what settings need to be changed in Epson PrintCD to make this work?? Thanks

07-09-2007	#50 (permalink)
richardcannon New on Forum Join Date: Sep 2007 Posts: 1	Help with cd-labelprint text wrapping I am using CD-LabelPrint 1.3 that came with my Canon IP4300 printer. Generally I think it is very good BUT it really bugs me that I can't get text to wrap and have to enter manual new lines. Am I missing some thing or won't it word wrap. Any ideas would be appreciated. I have found that if an image is copied in an image editing program and pasted into LabelPrint the file size is very much bigger than adding a JPEG image file.

15-09-2007	#51 (permalink)
splice New on Forum Join Date: Mar 2006 Posts: 10	Re: Help with cd-labelprint Hi would like to know if kev 1952 is still around don't see any post of his lately? I would like to get in touch with hin on some problems with my canon printer. thanks splice

15-09-2007	#52 (permalink)
Arachne Senior Moderator & Reviewer Join Date: Nov 2005 Location: Keeping my media stash safe. Posts: 25,932	Re: Help with cd-labelprint @splice - One thread/post is enough about getting in touch with the user. Bump your thread if necessary, but please don't post the same request in other threads. Further posts of the same will be removed. __________________ Current drives: Samsung SH-S203N (SB02 patched) + Pioneer DVR-115D (1.06) + Optiarc AD-5170S (1.12) + Litey LH-20A1H (LL0D) + Samsung SH-S182D (SB06 RPC1) x2 + Litey SHM-165P6S (MS0R) + LG E10N (JE07) + BenQ DW1650 (BCDC) x2 + Litey SHW-1635S (YV6P) x2 + BenQ DW1640@164B (BEFB) + LG 4167B (DL13 TDB) + Samsung SH-S162L (TS08) + NEC ND-4551A (1.Z2) + LG GCE-8520B (1.00) + LiteOn SOHR-5239S (2S0B) Retired: LiteOn LDW-851@SOHW-832 + LiteOn SOHW-1693S + LG 4163B My Review PCs How to delete your upper and lower filters : How to check/enable DMA by Womble Click here to join cdfreaks.com and be part of our friendly community! The CDFreaks Distributed Computing Teams need YOU! Join the Team(s) and help save some lives! Read more here

Today
CD Freaks	__________________ This advertising will not be shown to registered members. Register your free account today and become a member on Club CD Freaks - Knowledge is Power

15-09-2007	#53 (permalink)
splice New on Forum Join Date: Mar 2006 Posts: 10	Re: Help with cd-labelprint Sorry about the double post but had no reply's in the other post ,and I had his name wrong had it kev 51 instead of kev 1952 so tryed to correct in this forum. splice

20-07-2008	#56 (permalink)
bandit13 New on Forum Join Date: Jul 2008 Posts: 1	Re: Help with cd-labelprint Hi, it is possible to print full face in CD LabelPrint. It requires editing the regedit, follow these steps. Click Start->Run-> type "regedit" and click ok. Then click and navigate to: HKEY_CURRENT_USER\Software\MediaNavigation\CDLabel Print\1.0\Settings\SizeAdjust\.Standard CD (12cm) When you click on .Standard CD (12cm) three values appear on the right hand side. Double click Inner and change it to -200 and make outer 20, then close regedit. When you now open CD LabelPrint the full face will be printable. NOTE! DON'T CLICK THE ADJUST ADJUST CIRCLE SIZE BUTTON IN CD LABEL PRINT OR THE VALUES WILL BE RESET!!!! Hope this helps!

22-07-2008	#57 (permalink)
jflan CD Freaks Senior Member Join Date: Jun 2007 Location: Vancouver, WA Posts: 525	Re: Help with cd-labelprint bandit13, I'm not a CDLP user, but if your Registry edit works, there will be many dry eyes in the CDLP camp. Thanks for posting it.

3 Days Ago	#59 (permalink)
thomm CD Freaks Junior Member Join Date: Jan 2006 Posts: 55	Re: Help with cd-labelprint how about a little more info on perfect alinment, when i go to crop the image, it gets way too big, there must be another way to increase the size of the image just a little at a time

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
cd-labelprint not starting	arkeyevme	CD & DVD Printing and Labeling	7	21-07-2007 16:43
Canon CD-LabelPrint manual?	gr8mpg	CD & DVD Printing and Labeling	3	08-12-2006 21:35
Can Anyone Help With Cd LabelPrint	rzep	General Software	1	04-11-2005 01:02
Canon CD LabelPrint	Metallo	General Software	1	01-07-2005 02:38
CD-labelprint	kempom	General Software	1	17-01-2005 12:40

Commercial ads