I am using DVDFab HD Decrypter 4.0.1.0 and I too am unable to back up the Ratatouille DVD. I have tried disabling PathPlayer, no luck.

When I select "Full Disc" and check "Copy DVD-Video (Video_TS folder)" then click "START", the program analyzes the DVD successfully, then says "Copy process started". It gets to 22.15% and then the "Process Failed!" message appears, and the main window says...

"Task_1 failed! Error=102(VTS_06_0.VOB 0 2048)
Process failed!

When I try it using "Main Movie", it immediately fails to analyze.

Any suggestions?

Odd, I had no problem using Main Movie.

That worked for me until VTS_10_1.VOB part. Here's a screen shot:
http://img257.imageshack.us/img257/2...readingpi3.gif

Note all the 0KB files. I am using v4.0.3.0 of the free version. I was doing a full disc to my HDD. Yes, I disabled pathfinder too.

sorry i think you must have a bad disk. i myself backedup R1 using dvdfab 3180. this was before the inclusion of pathplayer. if the disk is new and free of any scratches return it to the store and get another from a different vendor.

Yeah, it was weird. I even triped copying that specific file and Explorer said it couldn't read/write it or something during the rip. I had to abort after ignoring a few more times. Ignoring all went down under 1 MB/sec and just kept hanging.

I tried watching the movie and the behind the scenes with WinDVD 7 on the same machine. No problems (no hiccups either). My dad's cheap DVD player had no problems either (last night).

Maybe my old Toshiba DVD-ROM SD-M1612 16X/48X ATAPI/IDE drive
sucks?

yeah, dvd drives can have a great effect on reading.

I have had Toshiba SD-M1612 16X/48X ATAPI/IDE since early 2003. I guess that's old and not good for today's DVD rippings/copyings?

you can update the firmware for your drive here:
http://forum.rpc1.org/dl_firmware.php?download_id=191

if that doesnt seem to help new drives can be had for pretty reasonable prices. check out this forum for some suggestions.
http://club.cdfreaks.com/f61/

troy

According to the newest hwinfo32, I am using X806.

DISC Info v1.6.1 says:

Firmware: X806
Vendor specifi: 11/9/2001
Extra info: XO
Toshiba SD-M 1612 revB/SD-C 2612
Drive region status: No lock detected
Read speed: 48x; Write speed: n/a (it's not a burner)

DISCINFO VERSION : 1.6.1.6
VENDOR : TOSHIBA
MODEL : DVD-ROM SD-M1612
REVISION : X806
VENDOR SPECIFIC : 11/09/01
LOADING MECHANISM : Tray
NUMBER VOL. LEVELS : 16
BUFFER SIZE : 512KB
TOSHIBA CODE : XO
TOSHIBA MODEL : Toshiba SD-M 1612 revB/SD-C 2612
INTERFACE : ATAPI
RPC2 SCHEME : NO
ANALOG AUDIO PLAY : YES
COMPOSITE OUTPUT : NO
DIGITAL PORT-PORT1 : YES
DIGITAL PORT-PORT2 : NO
READ UPC CODE : YES
MULTISESSION READ : YES
MODE 2 FORM 1 : YES
MODE 2 FORM 2 : YES
READ ISRC CODE : YES
READ BAD CODE : NO
BUFFER UNDER-RUN : NO
MT. RAINIER : NO
CAN READ CDR : YES
CAN READ CDRW : YES
CAN READ CDRM2 : YES
CAN WRITE CDR : NO
CAN WRITE CDRW : NO
CAN TEST WRITE : NO
CAN READ DVD-ROM : YES
CAN READ DVD-R : YES
CAN READ DVD-RW : YES
CAN READ DVD-RAM : YES
CAN READ DVD+R : NO
CAN READ DVD+RW : NO
CAN WRITE DVD-R : NO
CAN WRITE DVD-RW : NO
CAN WRITE DVD-RAM : NO
CAN WRITE DVD+R : NO
CAN WRITE DVD+RW : NO
MAX CDR READ SPEED : 48



I recall my friend unlock the region stuff on this drive. So, I guess that is why the firmware data is weird and not listed in your URLs.

Toshiba SD-M1612 RevC:
o Patched J002 firmware (RPC-1, No Read Limit)

available here

http://hijacker.rpc1.org/toshiba_nolimit/#Download

Um, am I supposed to be using RevB, not C? I will also need to find a DOS boot disk. Is there one for a CD due to lack of 3.5" disk drives?

i dont know, just do a google search for Toshiba SD-M1612 and what you do now is up to you.

Dear all,

Please try DVDFab 4.0.3.2 to see the result:

http://club.cdfreaks.com/f116/dvdfab...-2-out-235014/

Thanks.

Best Regards,
Fengtao