I AM USING A LITE-ON DVD BURNER. I AM GOING TO SWAP OVER TO VERBATIM DVD MEDIA 16x DVD+R. WHAT IS A GOOD DVD RECORDING SPEED AND WHAT SETTINGS SHOULD I USE SO THAT I DO NOT HAVE ANY ERRORS IN MY DVD'S........THANKS FOR YOUR HELP

Using all caps is classed as shouting on the Internet

Good to hear you're getting some Verbs. With the 16x discs, I find that setting the write speed to either 8x or 12x in DVDFab yields pretty good results.

As for other settings, I usually tend to choose Main Movie Only, and remove all but one Audio stream if I'm using single-layer discs.

Hello raul-monci, and welcome to the Fab forum. Personally these are my and a lot of other people's settings. Go to common settings and on the left click on Read. You'll see I/O Mode. Set it to SPTI. I have my retry times set for 10. Next I have the read -ahead cache checked. Now on the left, click the Write. You'll see What Type of DVD-R Media, I have mine set for SAO Writing. After that go to DVD Writable Media Size, I have mine set for 4472. Then if you are using +R/RW media, you want to check the, Check Set BOOKTYPE OF dvd-Rom [ Only for DVD+r/rw MEDIA] box. There you have it. That ought to give give pretty deciet burns my friend. Good luck and happy burning. ~ Mike