DVDFab 3 error codes list - Page 4 - Club CD Freaks

maineman · 11-02-2007

Quote:

Originally Posted by sourgr8ps

thank you for posting these codes. what does 400 error mean?

Error 400 = a general transcoding error, really non-specific.
What sort of problems are you having?...the more details, the better for us to try to nail down a solution.

sourgr8ps · 11-02-2007

The biggest prob. I have is having to unistall the UltraDMA on my Sony DVD drive after "succesfully" burning a disc. Once I go through that process, all of a sudden the blank disc magically becomes a movie title and is playable. It would be nice to not have to uninstall/reboot every time, but it works.
The error 400 is actuallly the first time I've seen an error dialog box in about 20 or so attempts, so I figure it was the movie disc. I'll try again and get more info. I think you guys are doing pretty damned good work!!
Sony DVD+-RW DW-Q58A, Windows XP, Genuine Intel T2300(R) CPU laptop (dell)

Tioviejo · 23-02-2007

downloaded DVDFab Gold V.3.0.8.0: trying to copy Shakespeare in Love to H/D using LG read/writer. For either Full Disk or Main Movie I get (almost immediately after Start) the 'Reading/Writing Error Control' panel: choosing Retry or Ignore moves the process along, until the next interruption; Abort generates the task failed message coded 400(15.3.VTS_04_1 VOB #####).

The error log reads -

23/02/2007 4:04:18 PM info ******************** Report session closed *********************
23/02/2007 4:02:04 PM info Current Drive selected : 1:1:0 - HL-DT-ST CD-RW GCE-8525B 1.02 [E] (Ide)
23/02/2007 4:02:04 PM info Using Patin-Couffin driver Version 1.37, Internal revision 37 - Async. Access mode
23/02/2007 4:02:04 PM info User default language : 4105 (0x1009h) - English (Canadian)
23/02/2007 4:02:04 PM info System default language : 2057 (0x0809h) - English (United Kingdom)
23/02/2007 4:02:04 PM info DLL Version 2.0.25.278
23/02/2007 4:02:04 PM info DLL C:\Program Files\DVDFab Gold 3\vso_hwe.dll
23/02/2007 4:02:04 PM info Version 3, 0, 8, 0
23/02/2007 4:02:04 PM info ExeName : "C:\Program Files\DVDFab Gold 3\DVDFabGold.exe"
23/02/2007 4:02:04 PM info OS : Microsoft Windows XP Personal Service Pack 2 (Build 2600)
23/02/2007 4:02:04 PM info ******************** Report session started ********************

23/02/2007 4:02:04 PM info Current Drive selected : 1:1:0 - HL-DT-ST CD-RW GCE-8525B 1.02 [E] (Ide)
23/02/2007 4:02:04 PM info Using Patin-Couffin driver Version 1.37, Internal revision 37 - Async. Access mode
23/02/2007 4:02:04 PM info User default language : 4105 (0x1009h) - English (Canadian)
23/02/2007 4:02:04 PM info System default language : 2057 (0x0809h) - English (United Kingdom)
23/02/2007 4:02:04 PM info DLL Version 2.0.25.278
23/02/2007 4:02:04 PM info DLL C:\Program Files\DVDFab Gold 3\vso_hwe.dll
23/02/2007 4:02:04 PM info Version 3, 0, 8, 0
23/02/2007 4:02:04 PM info ExeName : "C:\Program Files\DVDFab Gold 3\DVDFabGold.exe"
23/02/2007 4:02:04 PM info OS : Microsoft Windows XP Personal Service Pack 2 (Build 2600)
23/02/2007 4:02:04 PM info ******************** Report session started ****************

I get the same result when using the software in an attempt to copy a non-commercial DVD.

My DVD read/writer is working normally, as far as I know . . .

Your thoughts shall be appreciated.

j0k3r79 · 27-02-2007

Alright, I've read through this forum and have'nt really heard much of the 116 error code. I've received it 3 times in a row now, only after copying 3 other discs perfectly. Using the same media, Verbatim DVD+R DL 8X. It seems to copy the dvd (using Full Disc), but after only a few seconds of trying to burn to my blank disc, this error pops up. Any ideas? I thought it could be the media, but why would the first 3 disc work and the rest not? Or maybe I should try a different copy method ie: Main Movie or something like that?

Jason

signals · 27-02-2007

Quote:

Originally Posted by Tioviejo

downloaded DVDFab Gold V.3.0.8.0: trying to copy Shakespeare in Love to H/D using LG read/writer. For either Full Disk or Main Movie I get (almost immediately after Start) the 'Reading/Writing Error Control' panel: choosing Retry or Ignore moves the process along, until the next interruption; Abort generates the task failed message coded 400(15.3.VTS_04_1 VOB #####).

The error log reads -

23/02/2007 4:04:18 PM info ******************** Report session closed *********************
23/02/2007 4:02:04 PM info Current Drive selected : 1:1:0 - HL-DT-ST CD-RW GCE-8525B 1.02 [E] (Ide)
23/02/2007 4:02:04 PM info Using Patin-Couffin driver Version 1.37, Internal revision 37 - Async. Access mode
23/02/2007 4:02:04 PM info User default language : 4105 (0x1009h) - English (Canadian)
23/02/2007 4:02:04 PM info System default language : 2057 (0x0809h) - English (United Kingdom)
23/02/2007 4:02:04 PM info DLL Version 2.0.25.278
23/02/2007 4:02:04 PM info DLL C:\Program Files\DVDFab Gold 3\vso_hwe.dll
23/02/2007 4:02:04 PM info Version 3, 0, 8, 0
23/02/2007 4:02:04 PM info ExeName : "C:\Program Files\DVDFab Gold 3\DVDFabGold.exe"
23/02/2007 4:02:04 PM info OS : Microsoft Windows XP Personal Service Pack 2 (Build 2600)
23/02/2007 4:02:04 PM info ******************** Report session started ********************

23/02/2007 4:02:04 PM info Current Drive selected : 1:1:0 - HL-DT-ST CD-RW GCE-8525B 1.02 [E] (Ide)
23/02/2007 4:02:04 PM info Using Patin-Couffin driver Version 1.37, Internal revision 37 - Async. Access mode
23/02/2007 4:02:04 PM info User default language : 4105 (0x1009h) - English (Canadian)
23/02/2007 4:02:04 PM info System default language : 2057 (0x0809h) - English (United Kingdom)
23/02/2007 4:02:04 PM info DLL Version 2.0.25.278
23/02/2007 4:02:04 PM info DLL C:\Program Files\DVDFab Gold 3\vso_hwe.dll
23/02/2007 4:02:04 PM info Version 3, 0, 8, 0
23/02/2007 4:02:04 PM info ExeName : "C:\Program Files\DVDFab Gold 3\DVDFabGold.exe"
23/02/2007 4:02:04 PM info OS : Microsoft Windows XP Personal Service Pack 2 (Build 2600)
23/02/2007 4:02:04 PM info ******************** Report session started ****************

I get the same result when using the software in an attempt to copy a non-commercial DVD.

My DVD read/writer is working normally, as far as I know . . .

Your thoughts shall be appreciated.

Welcome to the forum. The log you posted is a burn log, the error you are getting is a transcoder error, which happens before the burn process starts. See if there are any entries in the logfile with "event" in the name and post those if there are any. It sounds like the original disc has errors.

signals · 27-02-2007

Quote:

Originally Posted by j0k3r79

Alright, I've read through this forum and have'nt really heard much of the 116 error code. I've received it 3 times in a row now, only after copying 3 other discs perfectly. Using the same media, Verbatim DVD+R DL 8X. It seems to copy the dvd (using Full Disc), but after only a few seconds of trying to burn to my blank disc, this error pops up. Any ideas? I thought it could be the media, but why would the first 3 disc work and the rest not? Or maybe I should try a different copy method ie: Main Movie or something like that?

Jason

Error 116 is a burn error. Please open the burn error log with Notepad and copy the text for one or two of the failed burns and post it here. I use the same blank media (at 2.4 or 4X) with no problems. If you are trying to burn a DL at 8X your burner may not support that speed.

j0k3r79 · 27-02-2007

2/27/2007 9:19:12 AM info Media removed. Burning layer not ready to write
2/27/2007 9:19:03 AM error Write error at 0 (16) - Code 03 72 01 [Close session error while writing leadin area]
2/27/2007 9:18:17 AM info Write started 3695632 sectors to write
2/27/2007 9:18:17 AM info Layer change set to LBA 2029520 (3.87 Gb.)
2/27/2007 9:18:17 AM info Writing speed requested x2.4, effective x2.4
2/27/2007 9:18:17 AM info layer break set by filesystem builder at 2029520
2/27/2007 9:18:17 AM info Available write speed: 2.4x
2/27/2007 9:18:17 AM info Media ID: MKM-003-00
2/27/2007 9:18:17 AM info DMA Enabled
2/27/2007 9:18:17 AM info Optimal Layer Break is in cell 17, around 01:10:04
2/27/2007 9:18:17 AM info Scanned files #403, folder #2 - total size 7566680064 b. (7.05 Gb.)
2/27/2007 9:18:17 AM info Inserted media type : DL DVD+R
2/27/2007 9:18:16 AM info Write started
2/27/2007 9:18:14 AM info New media inserted. Burning layer is ready to write
2/27/2007 9:18:14 AM info Compatible media types : DVD-R, DVD-RW Seq., DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R
2/27/2007 9:18:14 AM info New Drive selected : 4:1:0 - HP DVD Writer 640c QS12 [G] (Ide)
2/27/2007 9:17:58 AM info New media inserted. Burning layer is ready to write
2/27/2007 9:17:56 AM info Current Drive selected : 4:1:0 - HP DVD Writer 640c QS12 [G] (Ide)
2/27/2007 9:17:56 AM info Using Patin-Couffin driver Version 1.37, Internal revision 37 - Async. Access mode
2/27/2007 9:17:56 AM info User default language : 1033 (0x0409h) - English (United States)
2/27/2007 9:17:56 AM info System default language : 1033 (0x0409h) - English (United States)
2/27/2007 9:17:56 AM info DLL Version 2.0.25.278
2/27/2007 9:17:56 AM info DLL C:\Program Files\DVDFab Platinum 3\vso_hwe.dll
2/27/2007 9:17:56 AM info Version 3, 0, 8, 0
2/27/2007 9:17:56 AM info ExeName : "C:\Program Files\DVDFab Platinum 3\DVDFabPlatinum.exe"
2/27/2007 9:17:56 AM info OS : Microsoft Windows XP Personal Service Pack 2 (Build 2600)
2/27/2007 9:17:56 AM info ******************** Report session started ********************

j0k3r79 · 27-02-2007

Here's a log from one of my failed burns yesterday also:

2/26/2007 8:15:39 PM info ******************** Report session closed *********************
2/26/2007 8:15:19 PM info Media removed. Burning layer not ready to write
2/26/2007 8:15:14 PM error Write error at 2208 (16) - Code 05 21 02 [Illegal request, Invalid address for Write]
2/26/2007 8:15:14 PM warning Reporting invalid address for write during recovery - trying to continue
2/26/2007 8:15:14 PM warning at sector 2192 (16) - recover sequence started
2/26/2007 8:15:14 PM warning Write error - Code 03 0C 00 [Write error] - Info 0 - CSI 0
2/26/2007 8:15:14 PM info Try #0 - duration 43224 µs
2/26/2007 8:15:13 PM info Lead-in burning time (mS) 48020
2/26/2007 8:14:24 PM info Write started 3695632 sectors to write
2/26/2007 8:14:24 PM info Layer change set to LBA 2029520 (3.87 Gb.)
2/26/2007 8:14:24 PM info Writing speed requested x2.4, effective x2.4
2/26/2007 8:14:24 PM info layer break set by filesystem builder at 2029520
2/26/2007 8:14:24 PM info Available write speed: 2.4x
2/26/2007 8:14:24 PM info Media ID: MKM-003-00
2/26/2007 8:14:24 PM info DMA Enabled
2/26/2007 8:14:24 PM info Optimal Layer Break is in cell 17, around 01:10:04
2/26/2007 8:14:24 PM info Scanned files #403, folder #2 - total size 7566680064 b. (7.05 Gb.)
2/26/2007 8:14:24 PM info Inserted media type : DL DVD+R
2/26/2007 8:14:23 PM info Write started
2/26/2007 8:14:21 PM info New media inserted. Burning layer is ready to write
2/26/2007 8:14:20 PM info Compatible media types : DVD-R, DVD-RW Seq., DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R
2/26/2007 8:14:20 PM info New Drive selected : 4:1:0 - HP DVD Writer 640c QS12 [G] (Ide)
2/26/2007 8:13:55 PM info New media inserted. Burning layer is ready to write
2/26/2007 7:25:18 PM info Current Drive selected : 4:1:0 - HP DVD Writer 640c QS12 [G] (Ide)
2/26/2007 7:25:18 PM info Using Patin-Couffin driver Version 1.37, Internal revision 37 - Async. Access mode
2/26/2007 7:25:18 PM info User default language : 1033 (0x0409h) - English (United States)
2/26/2007 7:25:18 PM info System default language : 1033 (0x0409h) - English (United States)
2/26/2007 7:25:18 PM info DLL Version 2.0.25.278
2/26/2007 7:25:18 PM info DLL C:\PROGRA~1\DVDFAB~1\vso_hwe.dll
2/26/2007 7:25:18 PM info Version 3, 0, 8, 0
2/26/2007 7:25:18 PM info ExeName : "C:\PROGRA~1\DVDFAB~1\DVDFAB~1.EXE"
2/26/2007 7:25:18 PM info OS : Microsoft Windows XP Personal Service Pack 2 (Build 2600)
2/26/2007 7:25:18 PM info ******************** Report session started ********************

signals · 27-02-2007

Quote:

Originally Posted by j0k3r79

Here's a log from one of my failed burns yesterday also:

2/26/2007 8:15:39 PM info ******************** Report session closed *********************
2/26/2007 8:15:19 PM info Media removed. Burning layer not ready to write
2/26/2007 8:15:14 PM error Write error at 2208 (16) - Code 05 21 02 [Illegal request, Invalid address for Write]
2/26/2007 8:15:14 PM warning Reporting invalid address for write during recovery - trying to continue
2/26/2007 8:15:14 PM warning at sector 2192 (16) - recover sequence started
2/26/2007 8:15:14 PM warning Write error - Code 03 0C 00 [Write error] - Info 0 - CSI 0
2/26/2007 8:15:14 PM info Try #0 - duration 43224 µs
2/26/2007 8:15:13 PM info Lead-in burning time (mS) 48020
2/26/2007 8:14:24 PM info Write started 3695632 sectors to write
2/26/2007 8:14:24 PM info Layer change set to LBA 2029520 (3.87 Gb.)
2/26/2007 8:14:24 PM info Writing speed requested x2.4, effective x2.4
2/26/2007 8:14:24 PM info layer break set by filesystem builder at 2029520
2/26/2007 8:14:24 PM info Available write speed: 2.4x
2/26/2007 8:14:24 PM info Media ID: MKM-003-00
2/26/2007 8:14:24 PM info DMA Enabled
2/26/2007 8:14:24 PM info Optimal Layer Break is in cell 17, around 01:10:04
2/26/2007 8:14:24 PM info Scanned files #403, folder #2 - total size 7566680064 b. (7.05 Gb.)
2/26/2007 8:14:24 PM info Inserted media type : DL DVD+R
2/26/2007 8:14:23 PM info Write started
2/26/2007 8:14:21 PM info New media inserted. Burning layer is ready to write
2/26/2007 8:14:20 PM info Compatible media types : DVD-R, DVD-RW Seq., DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R
2/26/2007 8:14:20 PM info New Drive selected : 4:1:0 - HP DVD Writer 640c QS12 [G] (Ide)
2/26/2007 8:13:55 PM info New media inserted. Burning layer is ready to write
2/26/2007 7:25:18 PM info Current Drive selected : 4:1:0 - HP DVD Writer 640c QS12 [G] (Ide)
2/26/2007 7:25:18 PM info Using Patin-Couffin driver Version 1.37, Internal revision 37 - Async. Access mode
2/26/2007 7:25:18 PM info User default language : 1033 (0x0409h) - English (United States)
2/26/2007 7:25:18 PM info System default language : 1033 (0x0409h) - English (United States)
2/26/2007 7:25:18 PM info DLL Version 2.0.25.278
2/26/2007 7:25:18 PM info DLL C:\PROGRA~1\DVDFAB~1\vso_hwe.dll
2/26/2007 7:25:18 PM info Version 3, 0, 8, 0
2/26/2007 7:25:18 PM info ExeName : "C:\PROGRA~1\DVDFAB~1\DVDFAB~1.EXE"
2/26/2007 7:25:18 PM info OS : Microsoft Windows XP Personal Service Pack 2 (Build 2600)
2/26/2007 7:25:18 PM info ******************** Report session started ********************

Both of these error logs indicate that the burn failed while trying to write the leadin, which is unusual . Have you tried burning a SL disc since this problem started? You already have the latest firmware for that drive, so nothing to be gained there. Sure sounds like a hardware problem with the drive. (Dust, laser, etc.) I had a HP 640e and never could get it to burn DLs consistantly. You might try increasing speed to 4X, or try burning with Nero if you have it installed (you can select this in Common Settings-->Write").

j0k3r79 · 27-02-2007

I tried to burn a CD-R, worked fine. DVD+R SL, worked fine. Tried to do another DVD+R DL, no luck. So could it just be these discs or is it my burner?

signals · 27-02-2007

Quote:

Originally Posted by j0k3r79

I tried to burn a CD-R, worked fine. DVD+R SL, worked fine. Tried to do another DVD+R DL, no luck. So could it just be these discs or is it my burner?

I think I would try another brand of blank DL before thinking about replacing the drive, and also try Nero if possible. I wound up having to replace my 640e with a Liteon, but I gave the 640e to my son who says it works fine on his machine.

j0k3r79 · 27-02-2007

well, i went and bought some more disc. same brand, only these are 2.4X speed. works great. we'll see if it continues to work. thanks for the help signals.

Jason

signals · 28-02-2007

Quote:

Originally Posted by j0k3r79

well, i went and bought some more disc. same brand, only these are 2.4X speed. works great. we'll see if it continues to work. thanks for the help signals.

Jason

That's great!

I think the firmware for the 640 may not support the 8X type blanks. Hope it works out OK. If you plan to keep the drive you might want to stock up on the 2.4X blanks. They will eventually disappear ffrom the stores.

yandao87 · 29-04-2007

hi, i'm receiving error 500 , failed process in dvd fab latest version 3.5.2.8.

it fails at task 1 of my splitting process.... at about 80+ percent.. i'm outputting the iso file to a external harddisk(usb).. can anyone help me??

there's no problem when i output to video_ts folders on the ext disk..

signals · 29-04-2007

Quote:

Originally Posted by yandao87

hi, i'm receiving error 500 , failed process in dvd fab latest version 3.5.2.8.

it fails at task 1 of my splitting process.... at about 80+ percent.. i'm outputting the iso file to a external harddisk(usb).. can anyone help me??

there's no problem when i output to video_ts folders on the ext disk..

Please check your version number. The latest version is 3.1.0.5 beta. Download the latest from the link here in the forum and try again.

yandao87 · 05-05-2007

Quote:

Originally Posted by signals

Please check your version number. The latest version is 3.1.0.5 beta. Download the latest from the link here in the forum and try again.

opps. typco. it was 3.0.98 platinum... will the latest version fix this problem??

signals · 05-05-2007

Quote:

Originally Posted by yandao87

opps. typco. it was 3.0.98 platinum... will the latest version fix this problem??

Not sure, but the updates often fix things that are not in the release notes, but are problems Fengtao and Ting have picked up here in the forum

. Try it and if you still have a problem, start a new thread that describes the problem. It's hard to follow questions and responses in this thread and someone else who has already solved the problem may see the new thread immediately.

solspolaris · 10-05-2007

Just got my first error trying to backup a disk. Here's the information...

Disk: 4400, Season 3, Disk 3
DVDFab HD Decryptor v3.1.0.8

Error

Quote:

07:57:24: Analyzing of DVD started
07:57:24: Analyzing of DVD completed successfully
07:57:24: Copy process started
08:13:49: Task_1 failed! Error=400(39 4 1 0 3885677 3885861 3885849)
08:13:50: Process failed!

Jimbo · 12-05-2007

Error 400 = a general transcoding error, really non-specific.
What sort of problems are you having?...the more details, the better for us to try to nail down a solution, also you could start by going to page 1 of this thread and start there and you might find a answer to your problem and BTW welcome to the forum

bigmacnc · 12-05-2007

Check the disc for dust, finger prints,& small scratches.

**fengtao** · 12-05-2007

Hi solspolaris,

Please send us all the .IFO files on Original disc, then we will check the problem.

A recommended way is listed below:
1) Open an Explorer window, and navigate to VIDEO_TS folder of the DVD.
2) Copy all files ending with .IFO to hard disk.
3) ZIP the IFO files on hard disk to one file. Name it with a readable filename, like Stealth_UK.zip.
4) Send the zip file to fengtao(at)dvdidle.com, you need replace (at) with @.

Best Regards,
Fengtao

daow · 13-06-2007

Quote:

Originally Posted by barber2u

I have dvdfab 3.0.2.5 and when I was burning I got task_2 failed! error=116 It burned about a fifth of the dvd. The movie is the great raid.

Thanks for any suggestions

I too am getting this same error code......Anyone know how to fix this?

signals · 13-06-2007

Quote:

Originally Posted by daow

I too am getting this same error code......Anyone know how to fix this?

Post the burn log from the failure, it will give us more information. Instructions in the bottom link in my sig if needed.

Wink Dinkerson · 14-06-2007

I'm getting Task 2 failed error 500.
It happens when it's time to make the ISO.
Is there any suggestions as to what I can do to fix this/ What might be causing the problem?
I've gotten this on a few DVD's now. Kill Bill Vol 1 & 2. I just set this machine up to burn & haven't had a success in it yet.

Wink Dinkerson · 15-06-2007

Quote:

Originally Posted by Wink Dinkerson

I'm getting Task 2 failed error 500.
It happens when it's time to make the ISO.
Is there any suggestions as to what I can do to fix this/ What might be causing the problem?
I've gotten this on a few DVD's now. Kill Bill Vol 1 & 2. I just set this machine up to burn & haven't had a success in it yet.

I've got a two good burns now using DVD Shrink, so I know the hardware is working right. Any suggestions on why DVDFab won't work?

11-02-2007	#77 (permalink)
sourgr8ps New on Forum Join Date: Feb 2007 Posts: 2	Re: DVDFab 3 error codes list The biggest prob. I have is having to unistall the UltraDMA on my Sony DVD drive after "succesfully" burning a disc. Once I go through that process, all of a sudden the blank disc magically becomes a movie title and is playable. It would be nice to not have to uninstall/reboot every time, but it works. The error 400 is actuallly the first time I've seen an error dialog box in about 20 or so attempts, so I figure it was the movie disc. I'll try again and get more info. I think you guys are doing pretty damned good work!! Sony DVD+-RW DW-Q58A, Windows XP, Genuine Intel T2300(R) CPU laptop (dell)

27-02-2007	#79 (permalink)
j0k3r79 New on Forum Join Date: Feb 2007 Location: TeXaS Posts: 5	Re: DVDFab 3 error codes list Alright, I've read through this forum and have'nt really heard much of the 116 error code. I've received it 3 times in a row now, only after copying 3 other discs perfectly. Using the same media, Verbatim DVD+R DL 8X. It seems to copy the dvd (using Full Disc), but after only a few seconds of trying to burn to my blank disc, this error pops up. Any ideas? I thought it could be the media, but why would the first 3 disc work and the rest not? Or maybe I should try a different copy method ie: Main Movie or something like that? Jason

Commercial message
<a href='http://adstats.cdfreaks.com/www/delivery/ck.php?n=a3f0e81c&cb=INSERT_RANDOM_NUMBER_HERE' target='_blank'><img src='http://adstats.cdfreaks.com/www/delivery/avw.php?zoneid=29&cb=INSERT_RANDOM_NUMBER_HERE&n=a3f0e81c' border='0' alt='' /></a>

27-02-2007	#85 (permalink)
j0k3r79 New on Forum Join Date: Feb 2007 Location: TeXaS Posts: 5	Re: DVDFab 3 error codes list I tried to burn a CD-R, worked fine. DVD+R SL, worked fine. Tried to do another DVD+R DL, no luck. So could it just be these discs or is it my burner?

27-02-2007	#87 (permalink)
j0k3r79 New on Forum Join Date: Feb 2007 Location: TeXaS Posts: 5	Re: DVDFab 3 error codes list well, i went and bought some more disc. same brand, only these are 2.4X speed. works great. we'll see if it continues to work. thanks for the help signals. Jason

29-04-2007	#89 (permalink)
yandao87 New on Forum Join Date: Apr 2007 Posts: 2	Re: DVDFab 3 error codes list hi, i'm receiving error 500 , failed process in dvd fab latest version 3.5.2.8. it fails at task 1 of my splitting process.... at about 80+ percent.. i'm outputting the iso file to a external harddisk(usb).. can anyone help me?? there's no problem when i output to video_ts folders on the ext disk..

12-05-2007	#94 (permalink)
Jimbo CD Freaks Die Hard Join Date: Oct 2006 Location: Arizona desert (SW) Posts: 1,919	Re: DVDFab 3 error codes list Error 400 = a general transcoding error, really non-specific. What sort of problems are you having?...the more details, the better for us to try to nail down a solution, also you could start by going to page 1 of this thread and start there and you might find a answer to your problem and BTW welcome to the forum __________________ Jim 112L FW 8.25 112L FW 8.25 Taiyo Yuden & Verbatim's only in my burners DVDFAB Platinum, DVD Next Copy

12-05-2007	#95 (permalink)
bigmacnc CD Freaks Die Hard Join Date: Sep 2005 Posts: 1,710	Re: DVDFab 3 error codes list Check the disc for dust, finger prints,& small scratches. __________________ Mack Find missing DVD or CD drives download CDGONE and Disable Auto Run Click Here Media Info: Click Here To understand DMA and how to lock it click Here The more problems that I have to deal with; the more I learn Clicking on Search or Searching on Google will not cause your computer to explode That is just a rumor Last edited by bigmacnc; 12-05-2007 at 01:14. Reason: spell error

12-05-2007	#96 (permalink)
fengtao DVDidle Author Join Date: Jul 2002 Posts: 1,555	Re: DVDFab 3 error codes list Hi solspolaris, Please send us all the .IFO files on Original disc, then we will check the problem. A recommended way is listed below: 1) Open an Explorer window, and navigate to VIDEO_TS folder of the DVD. 2) Copy all files ending with .IFO to hard disk. 3) ZIP the IFO files on hard disk to one file. Name it with a readable filename, like Stealth_UK.zip. 4) Send the zip file to fengtao(at)dvdidle.com, you need replace (at) with @. Best Regards, Fengtao __________________ DVDFab - The ultimate DVD copying/converting/burning software! Copy any DVD to DVDR/PSP/iPod/etc. DVD Region+CSS Free - Watch and copy any region code CSS-encrypted DVD on any DVD drive! http://www.dvdidle.com/

14-06-2007	#99 (permalink)
Wink Dinkerson New on Forum Join Date: Jun 2007 Posts: 3	Re: DVDFab 3 error codes list I'm getting Task 2 failed error 500. It happens when it's time to make the ISO. Is there any suggestions as to what I can do to fix this/ What might be causing the problem? I've gotten this on a few DVD's now. Kill Bill Vol 1 & 2. I just set this machine up to burn & haven't had a success in it yet.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Adding DVDFab to the DEP Exception List on Vista	StormJumper	DVDFab / DVD Region+CSS Free	6	01-10-2007 20:20
DVDFab Platinum, Express, Gold Error Codes	dmp31	DVDFab / DVD Region+CSS Free	8	01-02-2007 18:50
need full scsi sense codes/asc/ascq list	grendel970	Optical Storage Technical Discussions	4	27-10-2006 19:06
Any list avail to Link media codes with each brand	FastAssEG	NEC DVD Burner / Optiarc DVD Burner	5	24-11-2004 03:56
Media Codes/ Label list dvdr?	SpHinXX	LiteOn DVD Burner / Sony DVD Burner	2	17-01-2004 03:18