cannot open file error at start of burn - Club CDFreaks

vagreys · 06-02-2008

Running DVDFab Platinum v4.0.5.5 (first), then v4.0.6.0 Beta (second) on a 2GHz Centrino Duo, 4mb cache, 4gb RAM, Vista Home Premium.

Attempting to clone Farscape vol 2.1 disk 1.

Receiving the following error at the start of the burn task:

Cannot open file
C:\Users\...\DVDFab\Temp\Clone\FARSCAPE S2 V1D1\.isoVTS_10_0.IFO.

Burn log is not diagnostic and appears normal vs all previous backups up to the point of failure. Forwarding zip of IFO's, etc.

vagreys · 06-02-2008

Here is the burn log, in case someone finds something in it that I didn't. I'm using Memorex DL +R disks to backup, and so far, with no problems. Since I discovered this software, I've been backing up all of my out-of-print disks without any difficulty until now. Farscape is notorious for challenging copy protection, and this is the first disk of the Season 2 boxed set. Pathfinder is on and finds problems to remove in every VTS except the one mentioned in the error message. Up to now, cloning has been flawless, so I suspect it is something funky about the copy protection.

Quote:

2/6/2008 5:36:11 AM info ******************** Report session closed *********************
2/6/2008 2:32:50 AM info Available write speed: 4x, 2.4x
2/6/2008 2:32:50 AM info Media ID: RITEK-S04-42
2/6/2008 2:32:50 AM info Media type: Dual Layer DVD+R
2/6/2008 2:32:50 AM info Not Applicable to this bus type
2/6/2008 2:32:50 AM info Write started
2/6/2008 2:32:36 AM info New media inserted. Burning layer is ready to write
2/6/2008 2:04:17 AM info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R
2/6/2008 2:04:17 AM info New Drive selected : 1:0:0 - HL-DT-ST DVD+-RW GSA-T11N A103 [E] (Ide)
2/6/2008 2:00:46 AM info Current Drive selected : 1:0:0 - HL-DT-ST DVD+-RW GSA-T11N A103 [E] (Ide)
2/6/2008 2:00:46 AM info Using Patin-Couffin driver Version 1.37, Internal revision 37 - Async. Access mode
2/6/2008 2:00:46 AM info User default language : 1033 (0x0409h) - English (United States)
2/6/2008 2:00:46 AM info System default language : 1033 (0x0409h) - English (United States)
2/6/2008 2:00:46 AM info DLL Version 2.1.5.335
2/6/2008 2:00:46 AM info DLL C:\Program Files\DVDFab Platinum 4\vso_hwe.dll
2/6/2008 2:00:46 AM info Version 4, 0, 6, 0
2/6/2008 2:00:46 AM info ExeName : "C:\Program Files\DVDFab Platinum 4\DVDFabPlatinum.exe"
2/6/2008 2:00:46 AM info OS : Personal (Build 6000)
2/6/2008 2:00:46 AM info ******************** Report session started ********************

Ranttanplan · 07-02-2008

I have the same Problem.

DVDFab does not burn Iso Files.

AngelsTrojans · 08-02-2008

I had the same problem...
Check this thread out

http://club.cdfreaks.com/f116/please...rouble-237995/

Hopefully they can correct the problem in the next version.

vagreys · 09-02-2008

Quote:

Originally Posted by AngelsTrojans

I had the same problem...
Check this thread out

http://club.cdfreaks.com/f116/please...rouble-237995/

Hopefully they can correct the problem in the next version.

Thank you all for replying. I am cloning disk-to-disk, not to hard drive, first. Also, I have been cloning other disks without difficulty. I will try a clean uninstall and revert to 4050 and see if that works.

vagreys · 10-02-2008

The problem is not the disk. The problem is in DVDFab, and was introduced sometime after v4.0.4.0 Beta. I did a clean uninstall of v4.0.6.2, and reinstalled v4.0.4.0 Beta (the last version I had prior to v4.0.5.5), and was able to clone the disk without error.

The versions that displayed the problem include: v4.0.5.5, v4.0.6.0 Beta, and v4.0.6.2.

vagreys · 23-02-2008

Has this problem been resolved? The release notes of the latest release do not indicate. I have heard nothing on my problem report, positive or negative. I'd hate to uninstall 4.040b only to discover that 4.065b will not work for the series I am currently backing up.

neoTrex · 25-04-2008

I have been experiencing this problem after build 4.0.1.2 which will still write dvd-9 format. In later versions i get the ifo error when attempting to burn a just loaded iso which is dvd-9 size. When it fails I cancel out and set the output size to dvd-5 and start the copy on dvd-5 media, it works fine. Curious? DVD-9 issue?

The failure de jour occcurred on "The Great Escape" ISBN 0-7928-6044-6

I did ANOTHER complete deinstall/deletion/clean registry/defrag routine and installed v5.0 beta. Re-copied the dvd, and same ifo error, DVD-5 works.

On a dvd>buffer>dvd the attempted write a Failed to Burn DVD error box pops up, etc.

DVDFab_Event.log

02:21:02: Analyzing of DVD started
02:21:03: Analyzing of DVD completed successfully
02:21:03: Copy process started
02:32:53: Copy process completed successfully
02:33:38: Burn DVD folder (C:\Documents and Settings\Daniel Loyd\My Documents\DVDFab\Temp\FullDisc\GREAT ESCAPE D1\) started
02:37:03: Task_2 failed! Error=116
02:37:04: Process failed!

dvdfab_burn_vso.log

4/25/2008 2:42:00 AM info ******************** Report session closed *********************
4/25/2008 2:35:12 AM error Write error at 23904 (16) - Code 05 21 02 [Illegal request, Invalid address for Write]
4/25/2008 2:35:12 AM warning Reporting invalid address for write during recovery - trying to continue
4/25/2008 2:35:12 AM warning at sector 23888 (16) - recover sequence started
4/25/2008 2:35:12 AM warning Write error - Code 03 0C 00 [Write error] - Info 0 - CSI 0
4/25/2008 2:35:12 AM info Try #0 - duration 5775363 µs
4/25/2008 2:34:57 AM info Lead-in burning time (mS) 0
4/25/2008 2:34:55 AM info Write started 4124416 sectors to write
4/25/2008 2:34:55 AM info Layer change set to LBA 2074400 (3.96 Gb.)
4/25/2008 2:33:41 AM info Writing speed requested x8.0, effective x8.0
4/25/2008 2:33:41 AM info layer break set by filesystem builder at 2074400
4/25/2008 2:33:41 AM info Available write speed: 8x, 6x, 4x
4/25/2008 2:33:41 AM info Media ID: RITEK-S04-42
4/25/2008 2:33:41 AM info Media type: Dual Layer DVD+R
4/25/2008 2:33:41 AM info Ultra DMA mode 4 (ATA66)
4/25/2008 2:33:39 AM info Optimal Layer Break is in cell 34, around 01:31:06
4/25/2008 2:33:38 AM info Scanned files #30, folder #2 - total size 8445612148 b. (7.87 Gb.)
4/25/2008 2:33:38 AM info Inserted media type : DL DVD+R
4/25/2008 2:33:38 AM info Write started
4/25/2008 2:33:31 AM info New media inserted. Burning layer is ready to write
4/25/2008 2:09:02 AM info Finalization Time 00:00:10 - Total completion time 00:06:12
4/25/2008 2:09:02 AM info WRITE SUCCESS
4/25/2008 2:08:52 AM info Write finished in 00:06:01 - Finalization start here. Avg. burn rate 10.29
4/25/2008 2:03:41 AM info Lead-in burning time (mS) 0
4/25/2008 2:02:50 AM info Write started 2290112 sectors to write
4/25/2008 2:02:50 AM info Writing speed requested x16.0, effective x16.0
4/25/2008 2:02:50 AM info Available write speed: 16x, 12x, 8x, 6x
4/25/2008 2:02:50 AM info Media ID: RICOHJPN-R03-04
4/25/2008 2:02:50 AM info Media type: DVD+R
4/25/2008 2:02:50 AM info Ultra DMA mode 4 (ATA66)
4/25/2008 2:02:47 AM info Scanned files #26, folder #2 - total size 4688998400 b. (4.37 Gb.)
4/25/2008 2:02:47 AM info Inserted media type : DVD+R
4/25/2008 2:02:47 AM info Write started
4/25/2008 1:50:40 AM info New media inserted. Burning layer is ready to write
4/25/2008 1:49:30 AM info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R
4/25/2008 1:49:30 AM info New Drive selected : 0:0:0 - HP DVD Writer 1040d EH24 [M] (Ide)
4/25/2008 1:48:57 AM info Current Drive selected : 0:0:0 - HP DVD Writer 1040d EH24 [M] (Ide)
4/25/2008 1:48:57 AM info Using Patin-Couffin driver Version 1.37, Internal revision 37 - Async. Access mode
4/25/2008 1:48:57 AM info User default language : 1033 (0x0409h) - English (United States)
4/25/2008 1:48:57 AM info System default language : 1033 (0x0409h) - English (United States)
4/25/2008 1:48:57 AM info DLL Version 2.1.7.338
4/25/2008 1:48:57 AM info DLL C:\Program Files\DVDFab 5\vso_hwe.dll
4/25/2008 1:48:57 AM info Version 5, 0, 0, 0
4/25/2008 1:48:57 AM info ExeName : "C:\Program Files\DVDFab 5\DVDFab.exe"
4/25/2008 1:48:57 AM info OS : Microsoft Windows XP Professional Service Pack 2 (Build 2600)
4/25/2008 1:48:57 AM info ******************** Report session started ********************

4/25/2008 2:35:12 AM error Write error at 23904 (16) - Code 05 21 02 [Illegal request, Invalid address for Write]
4/25/2008 2:35:12 AM warning Reporting invalid address for write during recovery - trying to continue
4/25/2008 2:35:12 AM warning at sector 23888 (16) - recover sequence started
4/25/2008 2:35:12 AM warning Write error - Code 03 0C 00 [Write error] - Info 0 - CSI 0
4/25/2008 2:35:12 AM info Try #0 - duration 5775363 µs
4/25/2008 2:34:57 AM info Lead-in burning time (mS) 0
4/25/2008 2:34:55 AM info Write started 4124416 sectors to write
4/25/2008 2:34:55 AM info Layer change set to LBA 2074400 (3.96 Gb.)
4/25/2008 2:33:41 AM info Writing speed requested x8.0, effective x8.0
4/25/2008 2:33:41 AM info layer break set by filesystem builder at 2074400
4/25/2008 2:33:41 AM info Available write speed: 8x, 6x, 4x
4/25/2008 2:33:41 AM info Media ID: RITEK-S04-42
4/25/2008 2:33:41 AM info Media type: Dual Layer DVD+R
4/25/2008 2:33:41 AM info Ultra DMA mode 4 (ATA66)
4/25/2008 2:33:39 AM info Optimal Layer Break is in cell 34, around 01:31:06
4/25/2008 2:33:38 AM info Scanned files #30, folder #2 - total size 8445612148 b. (7.87 Gb.)
4/25/2008 2:33:38 AM info Inserted media type : DL DVD+R
4/25/2008 2:33:38 AM info Write started
4/25/2008 2:33:31 AM info New media inserted. Burning layer is ready to write
4/25/2008 2:09:02 AM info Finalization Time 00:00:10 - Total completion time 00:06:12
4/25/2008 2:09:02 AM info WRITE SUCCESS
4/25/2008 2:08:52 AM info Write finished in 00:06:01 - Finalization start here. Avg. burn rate 10.29
4/25/2008 2:03:41 AM info Lead-in burning time (mS) 0
4/25/2008 2:02:50 AM info Write started 2290112 sectors to write
4/25/2008 2:02:50 AM info Writing speed requested x16.0, effective x16.0
4/25/2008 2:02:50 AM info Available write speed: 16x, 12x, 8x, 6x
4/25/2008 2:02:50 AM info Media ID: RICOHJPN-R03-04
4/25/2008 2:02:50 AM info Media type: DVD+R
4/25/2008 2:02:50 AM info Ultra DMA mode 4 (ATA66)
4/25/2008 2:02:47 AM info Scanned files #26, folder #2 - total size 4688998400 b. (4.37 Gb.)
4/25/2008 2:02:47 AM info Inserted media type : DVD+R
4/25/2008 2:02:47 AM info Write started
4/25/2008 1:50:40 AM info New media inserted. Burning layer is ready to write
4/25/2008 1:49:30 AM info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R
4/25/2008 1:49:30 AM info New Drive selected : 0:0:0 - HP DVD Writer 1040d EH24 [M] (Ide)
4/25/2008 1:48:57 AM info Current Drive selected : 0:0:0 - HP DVD Writer 1040d EH24 [M] (Ide)
4/25/2008 1:48:57 AM info Using Patin-Couffin driver Version 1.37, Internal revision 37 - Async. Access mode
4/25/2008 1:48:57 AM info User default language : 1033 (0x0409h) - English (United States)
4/25/2008 1:48:57 AM info System default language : 1033 (0x0409h) - English (United States)
4/25/2008 1:48:57 AM info DLL Version 2.1.7.338
4/25/2008 1:48:57 AM info DLL C:\Program Files\DVDFab 5\vso_hwe.dll
4/25/2008 1:48:57 AM info Version 5, 0, 0, 0
4/25/2008 1:48:57 AM info ExeName : "C:\Program Files\DVDFab 5\DVDFab.exe"
4/25/2008 1:48:57 AM info OS : Microsoft Windows XP Professional Service Pack 2 (Build 2600)
4/25/2008 1:48:57 AM info ******************** Report session started ********************

neoTrex · 27-04-2008

Need insight please.

I've been using DVDfab platinum for about 9 months. Currently running 5.0 and experiencing the same problem after v4.0.1.2. When I import a dvd-9 to an iso and attempt to create a new dvd-9 I get the "cannot open file" ...iso window box (pre-write because the dvd+rdl is still good). After canceling with dvdfab still open I switch to dvd-5 format the process works to dvd-5 media. Why is the ifo file found in dvd-5 and not dvd-9?

De-installing (complete process) any version and re-installing v4.0.1.2 allows me to create a dvd-9 from the previously copied movie (DAMN, find that paper-tape reader!). I have not been able to find a simple/complex solution while only using dvdfab (reasonable expectation IMHO). I do not understand if this is a dvdfab or my system issue. Here is a link to dvdfab errors on my system. http://club.cdfreaks.com/f116/cannot...7/#post2044683
I'm running XP-PRO SP2, Intel core 2 Duo E6550, 4 GB, 3 DVD writers. What other info can I provide towards finding a solution?

regards,

Dan Loyd
just another bmud grunt

signals · 27-04-2008

Dan
I will try to help you but the other thread is not the place--too many posts--and the discussion would be hard to follow. We can just continue it here.

It is not clear to me what mode you are using and what type of source. When you say

Quote:

When i import a dvd-9 to an iso..."

do you mean you are reading an original movie disc (DVD-9) through DVDFab (which mode?) to an ISO file? Could you do a screen capture of the error message and post it here.

Quote:

Originally Posted by neoTrex
Need insight please.

I've been using [URL="http://www.dvdfab.net/?vid=avangate&aid=689&AFFSRC=autolink"

DVDfab[/url] platinum for about 9 months. Currently running 5.0 and experiencing the same problem after v4.0.1.2. When I import a dvd-9 to an iso and attempt to create a new dvd-9 I get the "cannot open file" ...iso window box (pre-write because the dvd+rdl is still good). After canceling with dvdfab still open I switch to dvd-5 format the process works to dvd-5 media. Why is the ifo file found in dvd-5 and not dvd-9?

De-installing (complete process) any version and re-installing v4.0.1.2 allows me to create a dvd-9 from the previously copied movie (DAMN, find that paper-tape reader!). I have not been able to find a simple/complex solution while only using dvdfab (reasonable expectation IMHO). I do not understand if this is a dvdfab or my system issue. Here is a link to dvdfab errors on my system. http://club.cdfreaks.com/f116/cannot...7/#post2044683
I'm running XP-PRO SP2, Intel core 2 Duo E6550, 4 GB, 3 DVD writers. What other info can I provide towards finding a solution?

regards,

Dan Loyd
just another bmud grunt

..

**alan1476** · 28-04-2008

I would get rid of these DL discs, they are crap

Quote:

RITEK-S04-42

Try some Verbatim, this media code might not even be in your burners firmware.

neoTrex · 28-04-2008

I import with DVDfab from an original disk (THE SHINING ISBN 0-7907-6005-3) no problem in full disc mode to an iso file. Then open saved iso and attempt to save to dvd+rdl in full disc and in seconds a window box opens with the following:

---------------------------
Dvdfab
---------------------------
Cannot open file E:\Movies\ISO\save\THE SHINING.isoVTS_01_0.IFO.
---------------------------
OK
---------------------------

corresponding dvdfab burn log:

4/28/2008 10:13:01 AM info Available write speed: 8x, 6x, 4x
4/28/2008 10:13:01 AM info Media ID: RITEK-S04-42
4/28/2008 10:13:01 AM info Media type: Dual Layer DVD+R
4/28/2008 10:12:58 AM info Write started
4/28/2008 10:12:57 AM info New media inserted. Burning layer is ready to write
4/28/2008 10:12:55 AM info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R
4/28/2008 10:12:55 AM info New Drive selected : 16:1:0 - SONY DVD RW AW-G170A 1.62 [O] (Usb)
4/28/2008 10:07:58 AM info Current Drive selected : 0:0:0 - HP DVD Writer 1040d EH24 [M] (Ide)
4/28/2008 10:07:58 AM info Using Patin-Couffin driver Version 1.37, Internal revision 37 - Async. Access mode
4/28/2008 10:07:58 AM info User default language : 1033 (0x0409h) - English (United States)
4/28/2008 10:07:58 AM info System default language : 1033 (0x0409h) - English (United States)
4/28/2008 10:07:58 AM info DLL Version 2.1.7.338
4/28/2008 10:07:58 AM info DLL C:\Program Files\DVDFab 5\vso_hwe.dll
4/28/2008 10:07:58 AM info Version 5, 0, 0, 0
4/28/2008 10:07:58 AM info ExeName : "C:\Program Files\DVDFab 5\DVDFab.exe"
4/28/2008 10:07:58 AM info OS : Microsoft Windows XP Professional Service Pack 2 (Build 2600)
4/28/2008 10:07:58 AM info ******************** Report session started ********************

I then ok out and cancel. set mode to dvd-5 and record in full disc mode just fine.

Revert to v4.0.1.2 occasionally for a dvd-9 burning party.

Thanks for the response,

Dan

signals · 28-04-2008

Dan
Try the Write Data mode for burning the ISO.

Quote:

Originally Posted by neoTrex

I import with DVDfab from an original disk (THE SHINING ISBN 0-7907-6005-3) no problem in full disc mode to an iso file. Then open saved iso and attempt to save to dvd+rdl in full disc and in seconds a window box opens with the following:

---------------------------
Dvdfab
---------------------------
Cannot open file E:\Movies\ISO\save\THE SHINING.isoVTS_01_0.IFO.
---------------------------
OK
---------------------------

corresponding dvdfab burn log:

4/28/2008 10:13:01 AM info Available write speed: 8x, 6x, 4x
4/28/2008 10:13:01 AM info Media ID: RITEK-S04-42
4/28/2008 10:13:01 AM info Media type: Dual Layer DVD+R
4/28/2008 10:12:58 AM info Write started
4/28/2008 10:12:57 AM info New media inserted. Burning layer is ready to write
4/28/2008 10:12:55 AM info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R
4/28/2008 10:12:55 AM info New Drive selected : 16:1:0 - SONY DVD RW AW-G170A 1.62 [O] (Usb)
4/28/2008 10:07:58 AM info Current Drive selected : 0:0:0 - HP DVD Writer 1040d EH24 [M] (Ide)
4/28/2008 10:07:58 AM info Using Patin-Couffin driver Version 1.37, Internal revision 37 - Async. Access mode
4/28/2008 10:07:58 AM info User default language : 1033 (0x0409h) - English (United States)
4/28/2008 10:07:58 AM info System default language : 1033 (0x0409h) - English (United States)
4/28/2008 10:07:58 AM info DLL Version 2.1.7.338
4/28/2008 10:07:58 AM info DLL C:\Program Files\DVDFab 5\vso_hwe.dll
4/28/2008 10:07:58 AM info Version 5, 0, 0, 0
4/28/2008 10:07:58 AM info ExeName : "C:\Program Files\DVDFab 5\DVDFab.exe"
4/28/2008 10:07:58 AM info OS : Microsoft Windows XP Professional Service Pack 2 (Build 2600)
4/28/2008 10:07:58 AM info ******************** Report session started ********************

I then ok out and cancel. set mode to dvd-5 and record in full disc mode just fine.

Revert to v4.0.1.2 occasionally for a dvd-9 burning party.

Thanks for the response,

Dan

neoTrex · 28-04-2008

write data mode

11:52:10: Burn DVD image (E:\Movies\ISO\save\THE SHINING.iso) started
11:52:23: Task_2 failed! Error=111
11:52:24: Process failed!

4/28/2008 11:53:19 AM info ******************** Report session closed *********************
4/28/2008 11:52:12 AM info Write started
4/28/2008 11:52:10 AM info New media inserted. Burning layer is ready to write
4/28/2008 11:52:09 AM info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R
4/28/2008 11:52:04 AM info New Drive selected : 16:1:0 - SONY DVD RW AW-G170A 1.62 [O] (Usb)
4/28/2008 11:50:56 AM info New media inserted. Burning layer is ready to write
4/28/2008 11:50:54 AM info Current Drive selected : 0:0:0 - HP DVD Writer 1040d EH24 [M] (Ide)
4/28/2008 11:50:54 AM info Using Patin-Couffin driver Version 1.37, Internal revision 37 - Async. Access mode
4/28/2008 11:50:54 AM info User default language : 1033 (0x0409h) - English (United States)
4/28/2008 11:50:54 AM info System default language : 1033 (0x0409h) - English (United States)
4/28/2008 11:50:54 AM info DLL Version 2.1.7.338
4/28/2008 11:50:54 AM info DLL C:\Program Files\DVDFab 5\vso_hwe.dll
4/28/2008 11:50:54 AM info Version 5, 0, 0, 0
4/28/2008 11:50:54 AM info ExeName : "C:\Program Files\DVDFab 5\DVDFab.exe"
4/28/2008 11:50:54 AM info OS : Microsoft Windows XP Professional Service Pack 2 (Build 2600)
4/28/2008 11:50:54 AM info ******************** Report session started ********************

4/28/2008 11:52:12 AM info Write started
4/28/2008 11:52:10 AM info New media inserted. Burning layer is ready to write
4/28/2008 11:52:09 AM info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R
4/28/2008 11:52:04 AM info New Drive selected : 16:1:0 - SONY DVD RW AW-G170A 1.62 [O] (Usb)
4/28/2008 11:50:56 AM info New media inserted. Burning layer is ready to write
4/28/2008 11:50:54 AM info Current Drive selected : 0:0:0 - HP DVD Writer 1040d EH24 [M] (Ide)
4/28/2008 11:50:54 AM info Using Patin-Couffin driver Version 1.37, Internal revision 37 - Async. Access mode
4/28/2008 11:50:54 AM info User default language : 1033 (0x0409h) - English (United States)
4/28/2008 11:50:54 AM info System default language : 1033 (0x0409h) - English (United States)
4/28/2008 11:50:54 AM info DLL Version 2.1.7.338
4/28/2008 11:50:54 AM info DLL C:\Program Files\DVDFab 5\vso_hwe.dll
4/28/2008 11:50:54 AM info Version 5, 0, 0, 0
4/28/2008 11:50:54 AM info ExeName : "C:\Program Files\DVDFab 5\DVDFab.exe"
4/28/2008 11:50:54 AM info OS : Microsoft Windows XP Professional Service Pack 2 (Build 2600)
4/28/2008 11:50:54 AM info ******************** Report session started ********************

signals · 28-04-2008

Error 111 is a VSO burning engine error code that means "Device Busy". I have no idea why you are receiving that--don't think I've ever seen it posted, but it is at least a clue.
//EDIT// This may be a DVDFab error code that is not on the list.

neoTrex · 28-04-2008

I will get some verbatium media and test it. The same media has no problem with v4.0.1.2.

So I guess the dvd-5 works/dvd-9 fails is a red herring for me? I don't have a clue where that might be controlled.

I have attached the output of nero tool with dvd-drive info.

In my original post there was also 116 err code. Can the v3 error codes be used?

This occurred on source-dvd to destination-dvd similar to the write-data.
DVDFab_Event.log

02:21:02: Analyzing of DVD started
02:21:03: Analyzing of DVD completed successfully
02:21:03: Copy process started
02:32:53: Copy process completed successfully
02:33:38: Burn DVD folder (C:\Documents and Settings\Daniel Loyd\My Documents\DVDFab\Temp\FullDisc\GREAT ESCAPE D1\) started
02:37:03: Task_2 failed! Error=116
02:37:04: Process failed!

06-02-2008	#1 (permalink)
vagreys New on Forum Join Date: Dec 2007 Posts: 17	cannot open file error at start of burn Running DVDFab Platinum v4.0.5.5 (first), then v4.0.6.0 Beta (second) on a 2GHz Centrino Duo, 4mb cache, 4gb RAM, Vista Home Premium. Attempting to clone Farscape vol 2.1 disk 1. Receiving the following error at the start of the burn task: Cannot open file C:\Users\...\DVDFab\Temp\Clone\FARSCAPE S2 V1D1\.isoVTS_10_0.IFO. Burn log is not diagnostic and appears normal vs all previous backups up to the point of failure. Forwarding zip of IFO's, etc.

07-02-2008	#3 (permalink)
Ranttanplan New on Forum Join Date: Feb 2008 Posts: 2	Re: cannot open file error at start of burn I have the same Problem. DVDFab does not burn Iso Files.

08-02-2008	#4 (permalink)
AngelsTrojans New on Forum Join Date: Aug 2007 Location: Los Angeles Posts: 18	Re: cannot open file error at start of burn I had the same problem... Check this thread out http://club.cdfreaks.com/f116/please...rouble-237995/ Hopefully they can correct the problem in the next version.

10-02-2008	#6 (permalink)
vagreys New on Forum Join Date: Dec 2007 Posts: 17	Re: cannot open file error at start of burn The problem is not the disk. The problem is in DVDFab, and was introduced sometime after v4.0.4.0 Beta. I did a clean uninstall of v4.0.6.2, and reinstalled v4.0.4.0 Beta (the last version I had prior to v4.0.5.5), and was able to clone the disk without error. The versions that displayed the problem include: v4.0.5.5, v4.0.6.0 Beta, and v4.0.6.2.

23-02-2008	#7 (permalink)
vagreys New on Forum Join Date: Dec 2007 Posts: 17	Re: cannot open file error at start of burn Has this problem been resolved? The release notes of the latest release do not indicate. I have heard nothing on my problem report, positive or negative. I'd hate to uninstall 4.040b only to discover that 4.065b will not work for the series I am currently backing up.

Today
CD Freaks	__________________ This advertising will not be shown to registered members. Register your free account today and become a member on Club CD Freaks - Knowledge is Power

27-04-2008	#9 (permalink)
neoTrex New on Forum Join Date: Jul 2007 Posts: 5	Re: DVDFab 5.0.0.0 Beta Discussion Thread Need insight please. I've been using DVDfab platinum for about 9 months. Currently running 5.0 and experiencing the same problem after v4.0.1.2. When I import a dvd-9 to an iso and attempt to create a new dvd-9 I get the "cannot open file" ...iso window box (pre-write because the dvd+rdl is still good). After canceling with dvdfab still open I switch to dvd-5 format the process works to dvd-5 media. Why is the ifo file found in dvd-5 and not dvd-9? De-installing (complete process) any version and re-installing v4.0.1.2 allows me to create a dvd-9 from the previously copied movie (DAMN, find that paper-tape reader!). I have not been able to find a simple/complex solution while only using dvdfab (reasonable expectation IMHO). I do not understand if this is a dvdfab or my system issue. Here is a link to dvdfab errors on my system. http://club.cdfreaks.com/f116/cannot...7/#post2044683 I'm running XP-PRO SP2, Intel core 2 Duo E6550, 4 GB, 3 DVD writers. What other info can I provide towards finding a solution? regards, Dan Loyd just another bmud grunt

28-04-2008	#15 (permalink)
signals CD Freak Join Date: Sep 2006 Location: Atlanta area Posts: 4,411	Re: cannot open file error at start of burn Error 111 is a VSO burning engine error code that means "Device Busy". I have no idea why you are receiving that--don't think I've ever seen it posted, but it is at least a clue. //EDIT// This may be a DVDFab error code that is not on the list. __________________ The Official Guide for DVDFab \|\| VSO Burning Engine Support Last edited by signals; 28-04-2008 at 22:46.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1 Click Copied Original Source Then Closed. Can I Open Saved Tmp File & Burn a Copy?	ArtModern	1ClickDVDCopy	2	22-03-2007 03:08
Error "unable to open file"	Cleary	CloneDVD	7	13-04-2006 06:40
CloneDVD error message Unable to open file	jhk1st	Nero & InCD	0	01-01-2006 03:10
Error when burn with nerocmd and the file is open	crisha	Nero SDK Discussion Forum	0	22-07-2005 18:52
Nero doesnt start to burn - Reset error- please help	TTroeger	Nero & InCD	14	09-05-2005 10:50

Commercial ads