Cannot "Check for new version Automatically"" - Club CDFreaks

Sea Monster · 01-05-2008

Dear Folks,

Hi, I am using DVDFAB 5.0 of the registered version of Platinum. I saw that there is a new version @ 5.0.1.2 is available, however, I could not update it when I click on the CHECK NOW button on the GENERAL tab.

There aren't any error message, but a message popup saying that I am now using the latest version.

Shouldn't I be able to update it since the 5.0.1.2 is out.

Thank you

7thSinger · 01-05-2008

*Edited due to ignorance*

Did you manually download the update or have you left it alone for now?

~Jethro~ · 01-05-2008

no it is a beta only final releases are available with the "check for new version..."

GregiBoy · 01-05-2008

5.0.1.2 is a beta version and I understand that the check only applies to full production versions.

7thSinger · 01-05-2008

Ha! I've learned something.

Thanks fellas.

I thought it was operational even with the beta version. Thanks a lot for the info.

Sea Monster · 02-05-2008

Thank you so much guys for your replies,

In that case, if I click on the CheckUp date button, I assumed the whole process of the updates are automatic.

I also understand that with DVDFAB, one need to UNINSTALL a older version prior to installing the new version, don't know if this apply to the automatic updates.

Chow

*maineman* · 02-05-2008

Quote:

Originally Posted by Sea Monster

Thank you so much guys for your replies,

In that case, if I click on the CheckUp date button, I assumed the whole process of the updates are automatic.

I also understand that with DVDFAB, one need to UNINSTALL a older version prior to installing the new version, don't know if this apply to the automatic updates.

Chow

I would recommend that you do NOT uninstall previous versions. There's no benefit in doing this, whether you're talking sequential updates of a particular version or the major releases themselves, ie., Fab 2.xxx, 3.xxx, 4.xxx, 5.xxx. These major releases will install in separate folders and are independent of one another. You can actually have all 4 major versions installed and working.
Again, there's no benefit in keeping 2.xxx or 3.xx active, but you may want to keep 4.xxx around as an insurance policy...

Good advice above re: beta releases.
To my knowledge, there is nothing automatic about updating.
I believe Fab only checks for an update and likely will prompt you to download. You still will have to install the new version via the install wizard.
Note: This is a guess on my part...I've never enabled the
"check for new version" feature.

*Bob* · 02-05-2008

Tom i agree but they do share the same burning engines.......except for well you know.

*maineman* · 02-05-2008

Quote:

Originally Posted by Bob

Tom i agree but they do share the same burning engines.......except for well you know.

Gotcha...

signals · 02-05-2008

In the past, Check for Updates ignored betas. Not sure if this is still the case, as I keep it turned off too.

*fengtao* · 02-05-2008

Dear all,

"Check for new version Automatically" will only check official released version, not beta versions.

To get beta versions, you need go to forum.

I hope it's helpful.

Best Regards,
Fengtao

*Bob* · 02-05-2008

Quote:

Originally Posted by fengtao

Dear all,

"Check for new version Automatically" will only check official released version, not beta versions.

To get beta versions, you need go to forum.

I hope it's helpful.

Best Regards,
Fengtao

yep and that too. Thank you Fengtao

Sea Monster · 02-05-2008

Quote:

Originally Posted by fengtao

Dear all,

"Check for new version Automatically" will only check official released version, not beta versions.

To get beta versions, you need go to forum.

I hope it's helpful.

Best Regards,
Fengtao

You guys are the GREATEST of the Greatest.

What am I supposed to do without you all.

Thanks....

7thSinger · 02-05-2008

Quote:

Originally Posted by fengtao

Dear all,

"Check for new version Automatically" will only check official released version, not beta versions.

To get beta versions, you need go to forum.

I hope it's helpful.

Best Regards,
Fengtao

Very helpful...thanks Fengtao!

01-05-2008	#1 (permalink)
Sea Monster CD Freaks Member Join Date: Mar 2008 Location: Challenger Deep, Mariana Trench Posts: 164	Cannot "Check for new version Automatically"" <a href='http://adstats.cdfreaks.com/www/delivery/ck.php?n=a13febf7&cb=INSERT_RANDOM_NUMBER_HERE' target='_blank'><img src='http://adstats.cdfreaks.com/www/delivery/avw.php?zoneid=30&cb=INSERT_RANDOM_NUMBER_HERE&n=a13febf7' border='0' alt='' /></a> Dear Folks, Hi, I am using DVDFAB 5.0 of the registered version of Platinum. I saw that there is a new version @ 5.0.1.2 is available, however, I could not update it when I click on the CHECK NOW button on the GENERAL tab. There aren't any error message, but a message popup saying that I am now using the latest version. Shouldn't I be able to update it since the 5.0.1.2 is out. Thank you __________________ Sometimes you can become rich by being generous or poor by being greedy....

01-05-2008	#2 (permalink)
7thSinger CD Freaks Senior Member Join Date: Apr 2008 Location: Indiana Posts: 618	Re: Cannot "Check for new version Automatically"" Edited due to ignorance Did you manually download the update or have you left it alone for now? __________________ Up the airy mountain...down the rushing glen. We dare not go a hunting...for fear of little men. Taiyo Yuden and Verbatim only for my burners and standalones. ...and shepards we shall be... CMC MAG = Last edited by 7thSinger; 01-05-2008 at 16:33. Reason: Ignorance

01-05-2008	#3 (permalink)
~Jethro~ CD Freaks Die Hard Join Date: Jan 2007 Location: wilds of western Montana Posts: 1,186	Re: Cannot "Check for new version Automatically"" no it is a beta only final releases are available with the "check for new version..."

01-05-2008	#4 (permalink)
GregiBoy CD Freaks Senior Member Join Date: Feb 2007 Location: Gold Coast, Australia Posts: 682	Re: Cannot "Check for new version Automatically"" 5.0.1.2 is a beta version and I understand that the check only applies to full production versions. __________________ "Beer is living proof that God loves us and wants us to be happy." - Benjamin Franklin 1706-1790

01-05-2008	#5 (permalink)
7thSinger CD Freaks Senior Member Join Date: Apr 2008 Location: Indiana Posts: 618	Re: Cannot "Check for new version Automatically"" Ha! I've learned something. Thanks fellas. I thought it was operational even with the beta version. Thanks a lot for the info. __________________ Up the airy mountain...down the rushing glen. We dare not go a hunting...for fear of little men. Taiyo Yuden and Verbatim only for my burners and standalones. ...and shepards we shall be... CMC MAG =

Commercial message
<a href='http://adstats.cdfreaks.com/www/delivery/ck.php?n=a5c5554b&cb=INSERT_RANDOM_NUMBER_HERE' target='_blank'><img src='http://adstats.cdfreaks.com/www/delivery/avw.php?zoneid=29&cb=INSERT_RANDOM_NUMBER_HERE&n=a5c5554b' border='0' alt='' /></a>

02-05-2008	#6 (permalink)
Sea Monster CD Freaks Member Join Date: Mar 2008 Location: Challenger Deep, Mariana Trench Posts: 164	Re: Cannot "Check for new version Automatically"" Thank you so much guys for your replies, In that case, if I click on the CheckUp date button, I assumed the whole process of the updates are automatic. I also understand that with DVDFAB, one need to UNINSTALL a older version prior to installing the new version, don't know if this apply to the automatic updates. Chow __________________ Sometimes you can become rich by being generous or poor by being greedy....

02-05-2008	#8 (permalink)
Bob I donated to the Tsunami fund and all I got was this lousy title Join Date: Sep 2004 Location: Looking for my zigzags ~ I come from the no place and i go to the no where Posts: 15,430	Re: Cannot "Check for new version Automatically"" Tom i agree but they do share the same burning engines.......except for well you know. __________________ "You've got a hole in your soul if you don't dig the Blues" .....My New Build is Finished. Click HERE to join CDFreaks.com Formerly rolling56 I'm not responsible for my typing in chat or on the board I have Oldtimers Keith Richards ~ "If You Want The Last Laugh........Join The Rolling Stones"

02-05-2008	#10 (permalink)
signals CD Freak Join Date: Sep 2006 Location: Atlanta area Posts: 3,655	Re: Cannot "Check for new version Automatically"" In the past, Check for Updates ignored betas. Not sure if this is still the case, as I keep it turned off too. __________________ The Official Guide for DVDFab \|\| VSO Burning Engine Support

02-05-2008	#11 (permalink)
fengtao DVDidle Author Join Date: Jul 2002 Posts: 1,653	Re: Cannot "Check for new version Automatically"" Dear all, "Check for new version Automatically" will only check official released version, not beta versions. To get beta versions, you need go to forum. I hope it's helpful. Best Regards, Fengtao __________________ DVDFab - The ultimate DVD copying/converting/burning software! Copy any DVD to DVDR/PSP/iPod/etc. DVD Region+CSS Free - Watch and copy any region code CSS-encrypted DVD on any DVD drive! http://www.dvdidle.com/

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The "dye" myth, or all about the "Mediacode" / "ADVInfo" / "MID	Francksoy	Blank Media	28	18-10-2007 09:57
covers "serious beats 31" "wamdue project" "tiesto-magic5" ???	djrolo	Dutch: De Woonkamer	7	04-06-2000 23:20