Burning DVD - Lead Out - Error - Club CDFreaks

Marduk · 09-11-2007

I just tried to burn a dvd twice, just a normal Data DVD with some tar.gz's on it:

Quote:

2CA0-80X3-1800-2000-406M-9994-****

Linux 2.6.22-14-generic
Nero API version: 7.5.14.9
Using interface version: 7.5.1.2
Installed in: /usr/lib/nero/
Application: Nero AG\Nero Linux
Internal Version: 7, 5, 14, 9

Recorder: <_NEC DVD_RW ND-4550A> Version: 1.06 - HA 0 TA 0 - 0.0.0.0
Adapter driver: HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1003MB (1027408kB)
Free physical memory: 124MB (127296kB)
Memory in use : 87 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

9.11.2007
NeroAPI
11:45:30 #1 ISO9660GEN -11 File Geniso.cpp, Line 3341
First writeable address = 0 (0x00000000)

11:45:30 #2 Text 0 File Burncd.cpp, Line 3490
Turn on Disc-At-Once, using DVD media

11:45:32 #3 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2297887 (510:38.37, 4488MB)
Last address to be written: 694511 (154:20.11, 1356MB)

11:45:32 #4 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO

11:45:32 #5 Text 0 File DlgWaitCD.cpp, Line 2952
Recorder: _NEC DVD_RW ND-4550A, Media type: DVD-R
Disc Manufacturer: SONY16 - D1
Disc Application Code: 64, Disc Physical Code: 193

11:45:32 #6 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:45:32 #7 Text 0 File ThreadedTransferInterface.cpp, Line 792
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 694512 (694512) = #694512/154:20.12
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 694512 blocks [_NEC DVD_RW ND-4550A (H:0 T:0)]
--------------------------------------------------------------

11:45:32 #8 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [_NEC DVD_RW ND-4550A (H:0 T:0)] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1422360576, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 694512 | 0 | 0x00
694512 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

11:45:32 #9 Text 0 File Burncd.cpp, Line 4263
Caching options: cache CDRom or Network-No, small files-Yes (<32KB)

11:45:32 #10 Phase 24 File ExtendedProgress.cpp, Line 537
Caching of files started

11:45:32 #11 TRANSFER 4 File TransferWriteFileItem.cpp, Line 168
Error reading file

11:45:32 #12 Text 0 File Burncd.cpp, Line 4382
Cache writing successful.

11:45:32 #13 Phase 25 File ExtendedProgress.cpp, Line 537
Caching of files completed

11:45:32 #14 Phase 36 File ExtendedProgress.cpp, Line 537
Burn process started at 16x (22160 KB/s)

11:45:32 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2712
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11:45:32 #16 Text 0 File DVDR.cpp, Line 3159
Recording mode: Sequential Recording Mode for Multisession

11:45:32 #17 Text 0 File DVDR.cpp, Line 3315
Start write address at LBA 0
DVD high compatibility mode: Yes

11:45:32 #18 Text 0 File Cdrdrv.cpp, Line 9915
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

11:45:32 #19 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800

11:47:00 #20 TRANSFER 4 File TransferWriteFileItem.cpp, Line 168
Error reading file

11:47:00 #21 TRANSFER -25 File Reader.cpp, Line 270
Error reading data

11:47:00 #22 Text 0 File Reader.cpp, Line 273
Exception value: -1

11:47:03 #23 Phase 133 File ExtendedProgress.cpp, Line 537
Writing short lead-out

11:48:40 #24 Text 0 File DVDR.cpp, Line 3717
EndDAO: Last written address was 308543 (4B53Fh)Close track 1, ret: 0
Close Session/Border, function 2, track: 3, finalize disc: NO, ret: 0

11:48:40 #25 Phase 38 File ExtendedProgress.cpp, Line 537
Burn process failed at 16x (22160 KB/s)

**mathf** · 09-11-2007

Seems like some of the files you wanted to burn are not accessible for reading...

Marduk · 09-11-2007

strange, k3b burned it without problems

**mathf** · 09-11-2007

Sounds strange indeed.
From what I can see in the log file, this is coming from a problematic file. What I also see, is that you have some caching options enabled (small files).
Try without this options (Misc tab in the 'New Compilation' dialog). As you are using a DVD-R, you are able to simulate on it. So you will not loose your media... but make sure 'Write' is unchecked in the burn tab

*_chef_* · 09-11-2007

The media/MID is not recognized so the app errors out...

09-11-2007	#2 (permalink)
mathf NeroLinux Moderator Join Date: Jun 2004 Posts: 430	Re: Burning DVD - Lead Out - Error Seems like some of the files you wanted to burn are not accessible for reading...

09-11-2007	#3 (permalink)
Marduk CD Freaks Junior Member Join Date: Mar 2005 Posts: 75	Re: Burning DVD - Lead Out - Error strange, k3b burned it without problems

09-11-2007	#4 (permalink)
mathf NeroLinux Moderator Join Date: Jun 2004 Posts: 430	Re: Burning DVD - Lead Out - Error Sounds strange indeed. From what I can see in the log file, this is coming from a problematic file. What I also see, is that you have some caching options enabled (small files). Try without this options (Misc tab in the 'New Compilation' dialog). As you are using a DVD-R, you are able to simulate on it. So you will not loose your media... but make sure 'Write' is unchecked in the burn tab

09-11-2007	#5 (permalink)
_chef_ CDFreaks Resident Join Date: Aug 2004 Location: @FX labs .de ...watching [Benders.Big.Score] [Tripping.The.Rift.The.Movie] Posts: 23,824	Re: Burning DVD - Lead Out - Error The media/MID is not recognized so the app errors out... __________________ Started with burning capable optical drives (CD-R) in 1997. Bought optical drives from AOpen, HP, LiteOn, NEC, Philips, Pioneer, Plextor, Ricoh, Samsung, Sanyo, Toshiba and Yamaha. *'Things are now in motion that cannot be undone.' [Gandalf, LoTR]* Enable DMA with micrAp$0ft Enable DMA free at your will busTRACE => Upper/Lower Filters Util DevCon *HOW TO ... Delete the Upper & Lower Filters!* If you expect help then please start by using the powerful SEARCH.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DVD Movie "Take The Lead: Error	DaveGee	DVDFab / DVD Region+CSS Free	12	12-09-2006 21:47
Pioneer 110d lead out error	walcom	Pioneer DVD Recorder and Player Forum	0	07-04-2006 16:10
Lead-Out on DVD Burning	GuyJ	Nero SDK Discussion Forum	0	11-08-2005 11:32
nero 6, CD-R lead-out error	Evil_Inside75	Nero & InCD	18	12-07-2005 17:48
GSA 4082B Lead In Error	darkclaw	LG Burner	4	04-04-2005 08:53

Commercial message
<a href='http://adstats.cdfreaks.com/www/delivery/ck.php?n=ac816a32&cb=INSERT_RANDOM_NUMBER_HERE' target='_blank'><img src='http://adstats.cdfreaks.com/www/delivery/avw.php?zoneid=29&cb=INSERT_RANDOM_NUMBER_HERE&n=ac816a32' border='0' alt='' /></a>