Quote:
|
Originally Posted by ala42 If you do not reboot after flashing the firmware, the ide driver might switch off UMDA2 mode which is NOT visible in the device manager... Rebooting will solve this problem, but you can also disable and directly reenable the ide port the drive is connected to in the device manager with the same result. This is a general problem and not related to the changes made by MCSE. |
I have always wonder why the BenQ flashers seemingly leave the IDE bus always active ie. after doing a flash, the IDE activity LED is always lit until a reboot is done. Irritates me enough to do a reboot - I use S3 sleep so reboots are otherwise rather rare on my PC.
The next time, I am going to try the disable/enable manoeveur to see this will get rid of the always on IDE LED.