Club CDFreaks - Knowledge is Power - View Single Post - Programming firmware for 811s housed in USB 2.0 external enclosure

*pinto2* · 28-01-2004

ECS K7VTA3 ver.8 has full USB2 support.

Some thoughts about enclosure.
CD burning @52 is 52 x 150kb/s = 7,8Mb/s. Burning DVDs at 4X (5,4Mb/s) is no problem. Not sure about 8X.

Remove any 'old' (CD) drivers in devicemanager, restart the comp and give it a try. At boot-up XP will install what you need, though.
[The enclosure must be powered.]

28-01-2004	#4 (permalink)
pinto2 DVD Freak Join Date: Oct 2003 Location: Nordic Region Posts: 7,301	ECS K7VTA3 ver.8 has full USB2 support. Some thoughts about enclosure. CD burning @52 is 52 x 150kb/s = 7,8Mb/s. Burning DVDs at 4X (5,4Mb/s) is no problem. Not sure about 8X. Remove any 'old' (CD) drivers in devicemanager, restart the comp and give it a try. At boot-up XP will install what you need, though. [The enclosure must be powered.]