Club CDFreaks - Knowledge is Power - View Single Post - Nero and the 2-second gap between tracks

insom480 · 31-05-2008

I found this problem on Nero 8 also...

I got around it by doing all the below:

1) Tick the option: Compilation Properties (F7) - Audio CD tab > no pauses between tracks
2) Track 1 pause = 2 seconds
3) Other tracks pause = 0 seconds

Works fine... Also to prevent wasting CD's and to test it out you can compile and set all your options then go to burn - leave the disk drive empty and start the burn process. Let it fail or cancel it and when you get back to the main window - if there is a problem with what you setup with the pauses it will revert to the 2 second pause for all tracks - or if you got it right it will stay as you set it.

hope this helps

31-05-2008	#13 (permalink)
insom480 New on Forum Join Date: May 2008 Posts: 1	Re: Nero and the 2-second gap between tracks I found this problem on Nero 8 also... I got around it by doing all the below: 1) Tick the option: Compilation Properties (F7) - Audio CD tab > no pauses between tracks 2) Track 1 pause = 2 seconds 3) Other tracks pause = 0 seconds Works fine... Also to prevent wasting CD's and to test it out you can compile and set all your options then go to burn - leave the disk drive empty and start the burn process. Let it fail or cancel it and when you get back to the main window - if there is a problem with what you setup with the pauses it will revert to the 2 second pause for all tracks - or if you got it right it will stay as you set it. hope this helps