Hi angour,
Received your pm, no problem.
I'll post my answer here on the forum so anyone reading the thread has all the info.
I don't have much to go on based on your pm,
Quote:
|
Originally Posted by angour ...when I downloaded the NeroCDSpeed_47715.zip and tried to run it, it gives me a message "No CD-ROM drive found"... |
but I suspect your problem with
nero cd-dvd speed lies with the aspi access layers.
I did glance at your thread...unfortunately I don't see your burn log (? deleted), but you are apparently using XP.
You also have a matshita drive...these are problematic and are some of the worst drives on the market for burning dvds...
sorry don't shoot the messenger.
Anyway, uninstall the drive from the IDE controller (probably secondary controller) in device manager.
Reboot and XP will reinstall the device and assign the appropriate drivers...
If this fails, do the same thing, but this time physically unplug the drive. Power up and then down again.
Now replug the drive and power up...
this should do it and should also fix any DMA issues...that I suspect you're having as well.
In addition, any problems specific to Fab
Fab > Common Settings > Read > I/O Mode >select
SPTI.
If
SPTI is already selected, try
Auto
Good luck